Worked perfectly, thank you. I was given a Toshiba 50UA2B63DB TV and told I could have it if I could fix it as he'd already bought a replacement. I was considering taking it to a repair shop tomorrow when I found your video with an almost identical picture problem. The layout is different but the principle was the same. I don't know if you mention it anywhere but it was 8 connectors covered up, had to pause and count them. Mine was the data ribbon on the left and the 1st 8 connectors left to right. With trial and error I found the right spot on about the 5th or 6th go. Thank you again.
It works for my LG 47" TV. Hard job! I try 8 times to apply the tape. Share my method-- don't cover first 2 pins. make tape width 4-6mm and apply from 3rd pin. there are two types of wires- 50p or 51p. so you need to try 4mm to 6mm with pin pitch increase to get the best result.
Tried it on my 55in LG TV and what can i say, i was doubting but it really worked. Took me a while to find the location but it works now nicely. Don’t know why but who cares.
I used a simple thin sticky tape and made 2mm x 10mm strips and placed them radomly until i found the right place. It took me about 15min and 10 different locations. Cheers
Fantastic! It took me a long time to get it right, but in the end I got there. For me, it was the other ribbon. Your trick saved me the cost of a new TV. Thank you. I hope the workaround lasts a long time. ;)
This video guided me, thanks. The VGH line was partially shorted. With all screen flexes connected it had 18V instead 25V. I just separated it using tape and tv came to life.
Kind of worked for JVC LT-58CA810. Started from leaving first and then second open, closing a bunch from 2 to approx 10. Then moving around closing 1 to 8-10. Ended up covering only the first one and it worked, however there is a barely visible line colour dependant remaining, which is fine with me, especially compared to the original problem. Thanks for the guidance in the video!
What a relief !!! It was a zero cost DIY for my LG although I had to try 5 times to locate the ribbon connections to be taped. ( In my case the defect was horizontal lines on the screen and taped (C2) the top ribbon.) Thank you for sharing.
But with this solution the TV was updated without having any more problems? Or will he do it again in the future? In the sense of making the lines pop?
Thnk u so much this is exactly wah is wrong with my lg screen the picture isn’t perfect and all the tv technicians I called said I would have to change the screen…
We have one of our TV''s a hitachi smart tv,with a translucent band across the bottom approx. 2 inches high, I think it's a manufacturing induced fault with the contact strips on the screen, so won't be fixing it when it pops, it will be a spares tv
The problem is cause by a faulty signaling circuit somewhere... Both sides have signaling circuits and the TV can work with one side carrying majority of the load. It definitely works. I just fixed my TV yesterday.
@@mj1henry1 Hard to believe. It doesn't even say how many wires to sever. And those wires carry information from the video card to the display. Severing those connections will simply make that part of the display to stop working, since there is no signal to it. It's like cutting nerves in your spine and expect your legs to still work.
They should manufacture TV's with self diagnosis feature with Error Codes and repairing by itself by bypassing the minor components like faulty capacitor or resistor. This could help customer alot without getting conned by Technicians.
hi need help bro what about oled lg cx 55 have a horizontal white stripe at bottom not very noticeable so any fix or way to minimize it and my concern if this tv will get worse over time or risk to stop working !? to be honest i found a deal running about 2 year with a very good price and i cant affroad new :)
I also fixed my tv this way and it seems to decrease image resolution. about 1 year later, the problem came back and this time I cannot fix this way again. Is there a more radical way?
I believe this is a temporary fix of the T-CON board as theses cables connect from the T-CON to the main board. So if you want it fixed for good replace the T-CON and T-CON cables.
The screen has pixels inside with nano capacitors which makes the screen to show, the pixels are connected in linear series. When any line of the pixel is short-circuited, it affects the entire screen. What he did was to disconnect the faulty line.
Hi I clean my lg oled then didn’t want to turn back on I unplugged it and try 2 days later and it works with a little bit of horizontal lines on the bottom right. Then the image was perfect for 1h30 minutes and it turned of and wen I try to turned back looks like it’s going to turn on but I doesn’t can you please have an idea on how to fixed that it’s like it goes on a safe mode or something. Anyway thanks for the video you post that’s really cool to help people like that.
The cleaning liquid is flowing into the glued ribbons from the screen panel (this are orange ribboncables directly from LCD) There is many from this type, and are located on the bottom of the screen, connected to a small pcb on the bottom of the TV, mostly under the speakers, covered with a plate. Disassemble the plate, and search wich glued ribbon is faulty, with switched on tv, try to fine push the ribbon cables to the panel, with a bank cards edge. If the stripes disappears, you have find the faulty piece. you must then make something (rubber stripe or silicone stripe) that continous push the ribbon to the PCB after reassembly.
Otro tapando contactos de la faja del cable con cinta aislante. Pero porqué no reparas en lugar de hacer chapuza?? Está claro que con esa "reparación" no está funcionando el panel al 100%, porque de fábrica no dejan desconectados esos pines de la faja del cable para que no se averíe???
hah normal that this is a defect of the screen to fix it 100% you have to replace the screen which costs money also this is a repair that we have fixed, let's say 90% working
Ciao ho risolto il problema....ma dopo qualche mese, sono comparse due linee in orizzontale nella parte inferiore dello schermo. Come posso risolvere? Grazie
@@ciciaritociciarito9054 mo' ci provo ma ho l'impressione che dovrò comprarne un altro. Hanno un timer: dopo 2 anni e qualche mese partono, mi è successo anche con il precedente
Samsung will sell it to you but the cost is about the same or more than a new TV depending how old yours is. A screen replacement is never worth it unless replaced under warranty (which doesn't cover physical damage).
The paper is used to make the contact more tightly than to cover the contact, since some contact is of no use, to cover it is ok so the technician did and seemed repair the tv.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Worked perfectly, thank you. I was given a Toshiba 50UA2B63DB TV and told I could have it if I could fix it as he'd already bought a replacement. I was considering taking it to a repair shop tomorrow when I found your video with an almost identical picture problem. The layout is different but the principle was the same. I don't know if you mention it anywhere but it was 8 connectors covered up, had to pause and count them. Mine was the data ribbon on the left and the 1st 8 connectors left to right. With trial and error I found the right spot on about the 5th or 6th go. Thank you again.
Hi on toshiba you fixed 6,7 or 8 PIN? From 1 to 8 or from 2 to 9? Thanks
would you explain how this fix works?
It works for my LG 47" TV.
Hard job! I try 8 times to apply the tape.
Share my method-- don't cover first 2 pins.
make tape width 4-6mm and apply from 3rd pin.
there are two types of wires- 50p or 51p.
so you need to try 4mm to 6mm with pin pitch increase to get the best result.
would you explain how this fix works?
Tried it on my 55in LG TV and what can i say, i was doubting but it really worked. Took me a while to find the location but it works now nicely. Don’t know why but who cares.
😎😎👍👍
Tell me please, what kind of tape and how wide tape you used and where do you placed it? I have Lg NANO cell and i can't find it
I used a simple thin sticky tape and made 2mm x 10mm strips and placed them radomly until i found the right place. It took me about 15min and 10 different locations. Cheers
Fantastic! It took me a long time to get it right, but in the end I got there. For me, it was the other ribbon. Your trick saved me the cost of a new TV. Thank you. I hope the workaround lasts a long time. ;)
What kind of tape was that
This video guided me, thanks. The VGH line was partially shorted. With all screen flexes connected it had 18V instead 25V. I just separated it using tape and tv came to life.
How did you identify the VGH line?
@@wisdomobukata9154 Should be marked on pcb.
I can't believe this worked but it did! The TV repair guy said it needed a new motherboard and wasn't worth repairing. Just shows what he knows!
How is the tv now?
How is the TV now
Kind of worked for JVC LT-58CA810. Started from leaving first and then second open, closing a bunch from 2 to approx 10. Then moving around closing 1 to 8-10. Ended up covering only the first one and it worked, however there is a barely visible line colour dependant remaining, which is fine with me, especially compared to the original problem. Thanks for the guidance in the video!
Excellent video this fixed a hitachi 58inch with the same problem
Easy follow instructions and tv is now working ok
I have the same 58 inch Hitachi with lines across the very bottom of the screen. Did you follow these steps and solve the problem?
What a relief !!! It was a zero cost DIY for my LG although I had to try 5 times to locate the ribbon connections to be taped. ( In my case the defect was horizontal lines on the screen and taped (C2) the top ribbon.)
Thank you for sharing.
What kind of tape did you use?
Four months after the repair, does your TV still work?
@@renitaedmonds72 Use plain paper
Thanks a lot Bro, You saved my $425 as LG engineer suggested to replace the screen.
Hey what tape U use to cover the thing?
@pewdiepiipewwie2904 Yes, still working
@@anglerforlife7538 normal selve tape
@@anglerforlife7538selve tape
@@anglerforlife7538 Use plain paper
Resp Sir! Nice Class Sir. -- ChinnaRao Paderu Andhrapradesh
Nice solution. Realy Good video. Congratulation.
Sir really great.... (LG 43 4k uhd tv ) Really working this trick❤.....tnq sir
Grande maestro !!
Hi, Thank you so much, i follow your tips and it works for my Smart LG 55" . I really appreciate you have save me a lot of strees and money.
This is informational ASMR! Well done 👏🏿
Great job ,I repair 2 of my tvs😊😊
Tnx a lot 🙏You got me out of trouble😅♥️
Which pins exactly do you cover
Merci 👍🏼 j'allais changer de téléviseur mais ça pourra attendre quelques mois avant que je change ma TV grâce à cette solution
Thanks you are a savior, it worked for me
Thanks master found that helpful
Hello. Doesn't applying glue cause a problem in the transmission of information?
And why didn't you open the flat cable in the first step
Good job my friend
actually covered which pin of the pcb?
But with this solution the TV was updated without having any more problems? Or will he do it again in the future? In the sense of making the lines pop?
Thnk u so much this is exactly wah is wrong with my lg screen the picture isn’t perfect and all the tv technicians I called said I would have to change the screen…
I this fixed my tv thank you
Love the easy quick fixes they’re the best thanks 😊
by luck!
Thank you so much ☺️
We have one of our TV''s a hitachi smart tv,with a translucent band across the bottom approx. 2 inches high, I think it's a manufacturing induced fault with the contact strips on the screen, so won't be fixing it when it pops, it will be a spares tv
I have the same make TV with the exact same problem, an inch or so group of lines across the bottom . Did you find a solution?
Worked for me. Thanks a lot !
Pershendetj , ka nje Samsung Smart Tv UE55MA9009
that is very helpful thank you
How can it work if you partially sever the connection between the screen and the video board? Makes no sense.
Exeactly what I want to know bcs my dad fixed tv like that and I cant belive
The problem is cause by a faulty signaling circuit somewhere... Both sides have signaling circuits and the TV can work with one side carrying majority of the load. It definitely works. I just fixed my TV yesterday.
@@mj1henry1 Hard to believe. It doesn't even say how many wires to sever. And those wires carry information from the video card to the display. Severing those connections will simply make that part of the display to stop working, since there is no signal to it. It's like cutting nerves in your spine and expect your legs to still work.
Beautyfull video sir
adverts on vids like these is nuts
i solved 2 tv by follow this video...thanks
How did you get it done?
They should manufacture TV's with self diagnosis feature with Error Codes and repairing by itself by bypassing the minor components like faulty capacitor or resistor. This could help customer alot without getting conned by Technicians.
it works! thanks dude
Hello engineer
Why didn't you doubt the side LVDS cable?
hi my 49 inch 4k tv has just one line very thin going from toooop to the bottom will this work for me ?
Thanks for watching
Can you do a video on a bush tv pls same problem x
Kann Mir bitte jemand sagen, wie das band heißt, was er im Video geklebt hat???? Please HELP HELP
hi need help bro what about oled lg cx 55 have a horizontal white stripe at bottom not very noticeable so any fix or way to minimize it and my concern if this tv will get worse over time or risk to stop working !? to be honest i found a deal running about 2 year with a very good price and i cant affroad new :)
Very helpfull!!
Kya aap OLED thik karte hain ?
You are amazing. Wtf. How??? But it worked
Grazie per la condivisione
My LG 49UF640T Horizontal lines on screen now is fix but i do with transparent scotch i hope that never going melted. Thank you !
How did you know which strip to tape? Was it just by luck?
Question is how long do we need to make on the paper to block ribbon lines?
THX!! I have tried with Grundig.... Left side was "dead" . And. Wow....
Is that a permanent fi x ??🤔
I also fixed my tv this way and it seems to decrease image resolution. about 1 year later, the problem came back and this time I cannot fix this way again. Is there a more radical way?
Same. Mine came back about 6 months later. Taping more pins doesn't seem to work.
I LOVE YOU MAN
thank you very much.
How many pins should be removed?
this great it works thanks so much
It's working thank you
But still dont know what is the problem? Tv screen or ribbon cable or motherboard where the problem starts ?
Panel fault only
I believe this is a temporary fix of the T-CON board as theses cables connect from the T-CON to the main board. So if you want it fixed for good replace the T-CON and T-CON cables.
T-con board is not a problem and the problem is scaler board only 😂
How do you know what lines to cover with tape?
Prsh mu po mi ndryshon ngjyrat e ekranit a eshte i njejti prob si ktu ne video?
Good job you are the best...
I have Toshiba 55 inches with the same problem i did it and it work good but in a few minutes it comes again, please why?
Shume mire vllai💪🏻
Nga eshtt ky
Wholey crap this actually worked 😅
Who are you to cover the ribbon lines?
you are strong👍👍👍👌
Thank you ❤️
Does anyone know how long the TV will last after repair?
1 day to 3months only
What Tape are you using?
What kind of tape works?
Help me know the shop in sierra Leone where they sell LG LED TV plasma television picture board 108cm/43
It is working sir thank u sir
good❤❤❤❤
What are the blocked contacts for? Why did they put them there in production if they are not needed?
They blocked nonlinear clocks
Pls 2. Question.....
The screen has pixels inside with nano capacitors which makes the screen to show, the pixels are connected in linear series. When any line of the pixel is short-circuited, it affects the entire screen. What he did was to disconnect the faulty line.
Make a high resistance or make a capacitor via paper or other purpose, some story, but no need to study it deep.
Check resistant value dc volt and check shorting also dont tap replace resistant this is the service centre works
Hi I clean my lg oled then didn’t want to turn back on I unplugged it and try 2 days later and it works with a little bit of horizontal lines on the bottom right. Then the image was perfect for 1h30 minutes and it turned of and wen I try to turned back looks like it’s going to turn on but I doesn’t can you please have an idea on how to fixed that it’s like it goes on a safe mode or something. Anyway thanks for the video you post that’s really cool to help people like that.
The cleaning liquid is flowing into the glued ribbons from the screen panel (this are orange ribboncables directly from LCD) There is many from this type, and are located on the bottom of the screen, connected to a small pcb on the bottom of the TV, mostly under the speakers, covered with a plate. Disassemble the plate, and search wich glued ribbon is faulty, with switched on tv, try to fine push the ribbon cables to the panel, with a bank cards edge. If the stripes disappears, you have find the faulty piece. you must then make something (rubber stripe or silicone stripe) that continous push the ribbon to the PCB after reassembly.
Otro tapando contactos de la faja del cable con cinta aislante. Pero porqué no reparas en lugar de hacer chapuza?? Está claro que con esa "reparación" no está funcionando el panel al 100%, porque de fábrica no dejan desconectados esos pines de la faja del cable para que no se averíe???
hah normal that this is a defect of the screen to fix it 100% you have to replace the screen which costs money also this is a repair that we have fixed, let's say 90% working
how did you get the right spot so quickly ?
for you it's fast in the video but only for me. how much I removed until I discovered the problem
Where do we get strip?
Ciao ho risolto il problema....ma dopo qualche mese, sono comparse due linee in orizzontale nella parte inferiore dello schermo. Come posso risolvere? Grazie
Curiosità...quale PIN hai coperto? Sei andato per tentativi?
@@blackswan9825 quelli che tu hai mostrato nel video.
@@ciciaritociciarito9054 mo' ci provo ma ho l'impressione che dovrò comprarne un altro. Hanno un timer: dopo 2 anni e qualche mese partono, mi è successo anche con il precedente
Thank u brother working my lg tv😊
good luck sir
The problem came back after two years of using this method,,any idea what to do next
okkkkk botbotttttt ikaw ray nakasabot!! looy ang cus2mer nimo bay hugaw kaau ka ug agi!!!
Cooood👌👌👌👌👍👍
I want my Samsung fixed so bad I need a screen where would I get one
Samsung will sell it to you but the cost is about the same or more than a new TV depending how old yours is. A screen replacement is never worth it unless replaced under warranty (which doesn't cover physical damage).
what kind of ribbon is that?
Is there any place in Nigeria I can fix my 55" LG OLED tv ?
Fixed yet?
Could someone explain how this fix works?
My is Hisense 55 inch it has this line issues and it doesn't have t-con board
Please synix 50 inch horzontal line
Excellent
Брат не хотелось бы тебе свой телек отдавать и на сколько твой скотч хватит мне интересно!?
Is it working on Samsung 32" UA32J4300
Magagawa p po ba ang tv ko na hanabishi..natuluan po sya ng tubig ulan..tapos po my guhit n sya..
Excelente 😊
This kind of video is wasting time. The guy did not even know which line to cover. Just try by error.
You are right ✅
Dude, it's written "KEEP TRYING"...
Do you know a better PRECISE method which you can teach me?
If you don't, STOP THE CRITICISM!
Try 4 to 10 time, no need to waste, TV set is a big thing against environment, not just money, love your Earth.
The paper is used to make the contact more tightly than to cover the contact, since some contact is of no use, to cover it is ok so the technician did and seemed repair the tv.
I wondered same
Bro can I change new tcon board please tell me yes or no
My problem is flickering
you may have a problem with the screen, not with the t-con