@@karlkarl6632 We call these "5 Gallon overhauls" before companies send their garbage off to the auction and some poor unsuspecting buyer gets a pile of junk thinking they just lucked out on a nice pretty machine.
that is exactly what i was thinking.. Wore out tracks, {oops they did change pads}, boom pin bores worn, but damn that paint job will bring them in every time
Did anyone see them rebuild the engine. The pumps, bearing, motors, planetary drives, or how about the tracks, and most important the damm hydro block,
Nice 'sweeping-motion, spray painting - yes, experienced it doing bmw work on a Tuna Vessel on the slip-way,.nice job even on the bucket mod's..awesome..nice presente 👍🦾✌️ thnx 🤙✌️👍
Spoken from a man who truly knows the beauty of a machine is much more than a fine paint job... we're at a point now where the DIY guy won't be able to work on a machine without proprietary software needed to repair/replace/calibrate simple components.... injectors, controllers, variable turbos, exhaust filters, etc. without a dealership. We should all enjoy this level of craftsmanship while we still can
I’m wondering what company would pay for that. Looks like it’s for a mine. I’m stunned they care what the paint looks like. Nice looking bucket work but the paint seems so redundant. Don’t get me wrong it looks awesome when it’s done.
Super travail, belle peinture avec de nouveaux stickers.👏👏.. félicitations à toute l'équipe pour avoir redonné une deuxième jeunesse et cette CAT .. merci pour la vidéo 👍👍😉
The paint and decals and the bucket look great. But isnt a restoration supposed to include undercarriage,engine and components,hydraulic motors pumps,cylinders and lines? All it got was a face lift
Nice paint job but no strip down of the excavator 🥴🥴🥴 to give it a Restoration you need to strip the entire excavator down into its component parts to see what needs to be replaced
They didn't restore it just painted it. A restoration would have been taking it all apart and adding a lot of new parts! That would have taken months....
Hey guys ! You should invest in an airless paint gun. Dipping in a 5 gallon pail. You’re gonna see through that paint you have there now in a couple days.
DFDFVJGHBH BU SADECE BİR ŞEKİLDE DIŞARI GİDİYOR AMA BU SADECE BİR AŞK VE MUTLULUK ANLARI DE DEVLET VE HÜKÜMET İLE BİR ŞEKİLDE DIŞARI GİDİYOR AMA BU 666😀🍫☝️👍👍👍👍👍💔💔💔💔💔
@@andreass7124 but the paint crew has the tools they need, not cheap tools either, but the guy working on a essential part of the machine can't even get a welding helmet? People's lives don't depend on the paint, someone can die if that bucket falls
As a trained car panel beater and painter. And worked mainly indoors with a spraybake oven approach. This is a real credit to you bunch of guys and team effort to prep sand/ tape prime and paint this huge machine outside and sustain a great finish off the gun outside. Looks fab. Great neat job and attention to detail guys as a TEAM EFFORT
Awesome, looks brand new out of the factory!!!
Hy fren 👋👋
Áo
Looks like brand new excavator ❤❤❤❤❤❤❤❤❤❤❤❤ keep it up 😊😊😊😊😊
I wouldn't call this a restoration more like a repaint job
Correct, no oil change, pins track rollers. just shop front dressing.
Lipstick on a pig!
@@BigSwede500 لمسلظرةظ
Dulux rebuild
@@karlkarl6632 We call these "5 Gallon overhauls" before companies send their garbage off to the auction and some poor unsuspecting buyer gets a pile of junk thinking they just lucked out on a nice pretty machine.
In my neck of the woods thats not called a restoration. We call it paintjob.
At least it will look pretty while its waiting for the fitter to show up ....again !
It’ll still leak oil and have a rattle 😂
No doubt,cheap labor and paint on some wore out piece of shit
We’ve always called it a “rattle can rebuild”.
cvbdy
the only one here doing any restoration is the guy who worked on that bucket for days
True all of the others only sand the paint and put on new paint so that is kinda easy it not easy but easier than the guy who do the bucket
What a nice restoration of the bucket! When are you going to do the rest of the machine?
VHVG❤Ggyas😢😢😢
at least it will look good when it's broken down.
Soo true
Na them cat last for ever
And my boss had use do this and to a 323 cat every thing was fine with it just the paint was bad and he was selling it
BRAVO COLLEAGUES , BEST WORK, REGARDS FROM TURKIYE
Agree with most ,, stunning paint job but doesn’t hide that fact that it has a trillion working hours on the clock.
Your right about that
It may have had a complete overhaul then the video was taken when they repainted it
Motor and hydrology could have been redone. Makes more sense than to buy a new one
You ever thought they might have dropped a new engine in there.
@@joeburrows6 it’s says restoration in the title , if they put an engine in it they would have gladly filmed the fact (hence restoration)
where’s the strip down where’s the tolerance checks wheres the restoration ?? It’s a rattle refurb.
Robert Mundell WHAA WHAA WHAA....THEY JUST DIDNT SHOW YOU....SIMPLY BECAUSE THEY KNEW YOU WOULD ASK
Paint job...
Not to mention the birdshit welds on the bucket
What you're squealing about is a rebuild
Идеальная работа. Как же они любят технику
Красава оживили робота😄
We call that a Ritchi bro’s rebuild.
that is exactly what i was thinking.. Wore out tracks, {oops they did change pads}, boom pin bores worn, but damn that paint job will bring them in every time
cant beat a euro auction special
Yup.. needs the ol 5 gallon overhaul
Ain’t that Purdy, just like putting lipstick on a pig
Lol I thought the same thing, a sherwin williams overhaul. Spend some money on paint and f@ck over the guy who buys it at auction
Was this a rattle-can rebuild or did it get new bearings, bushings, rebuilt powertrain components before the video started?
Looks like it only had a paint job.
A paint job is far from “restoration” another clickbait title.
They probably have already done the pins and busshings before this video, uts part of regular maintenace and repair
Five gallon overhaul
Did anyone see them rebuild the engine. The pumps, bearing, motors, planetary drives, or how about the tracks, and most important the damm hydro block,
didn't even replace a hose
I was thinking about that too people could be buying used diggers
Its restoration and not rebuilt
@@nikpalt4676 all they restored was the paint.
@@nikpalt4676 definition of restoration the action of returning something to a former owner, place, or condition:
The 245B ME and this 385C LME are the most gorgeous machines!
Unfortunately at an extremely high price
Here in Australia that’s called a Dulux rebuild.
Nice 'sweeping-motion, spray painting - yes, experienced it doing bmw work on a Tuna Vessel on the slip-way,.nice job even on the bucket mod's..awesome..nice presente 👍🦾✌️ thnx 🤙✌️👍
Around here that's called a craigslist rebuild.
Looks more like a chop shop😎
Αυτό το μηχάνημα έγινε για την έκθεση! που να το βάλεις μες τα χώματα τώρα! μπράβο στο συνεργείο! 👏👏👏👏👏
I'm impressed,super good looking paint job,and craftsmanship,
Spoken from a man who truly knows the beauty of a machine is much more than a fine paint job... we're at a point now where the DIY guy won't be able to work on a machine without proprietary software needed to repair/replace/calibrate simple components.... injectors, controllers, variable turbos, exhaust filters, etc. without a dealership. We should all enjoy this level of craftsmanship while we still can
But its still a caterpillar....
They restored it cosmetically, but not mechanically, which is by far the more important task.
The Cat Decal even came with the Copyright label. Legit!
Μπράβο στα παιδιά έκαναν πολύ ωραία δουλειά!!
Κούκλα έγινε!! Καλές δουλειές!!
Considering they done that outside, amazing job
Welder is welding in short sleeves, he's a better man than I am
I’m wondering what company would pay for that. Looks like it’s for a mine. I’m stunned they care what the paint looks like. Nice looking bucket work but the paint seems so redundant. Don’t get me wrong it looks awesome when it’s done.
WOWWWWWWWW 😮 😮 😮 😮. Complimenti SOTIRIANIS/LABRIANIDIS. 🔝 🔝 🔝 🔝 🔝 🔝 🤗🤗🤗. BUONA PASQUA 🥂🥂🎂🍾🍾👋👋👋
Это не рестоврация, это просто перекраска.
Oh c'est ma passion
Bravi!👍🏼
Super travail, belle peinture avec de nouveaux stickers.👏👏.. félicitations à toute l'équipe pour avoir redonné une deuxième jeunesse et cette CAT .. merci pour la vidéo 👍👍😉
Good job repair bucket and restoration unit
NOW, THESE ARE SOME "BAD" DUDES RIGHT HERE AND THEY DID AN "AMAZING" RESTORATION JOB ON THIS EXCAVATOR INDEED!!!👏🏾👏🏾👏🏾👏🏾👏🏾👌🏾👍🏾❤💯💯💯💯
The good old Ritchie brothers tuneup.
So this is what you call a restoration huh? The old RUSTO RESTO !
Y Love Mega machines Channel
The only good thing about this video is it led me to other GOOD excavator videos.
Love the forklift platform
EHS approved !
Couldn’t do this the Uk 🇬🇧.
As it’s pissing down all the time ☔️ 🌧
Top excavator quality CAT
I'd love to see someone respray a newer CAT machine and backdate it with old Caterpillar yellow and pacman decals.
the pacman logo was great graphic design.
Every Pac-Man logo cat key I find I keep
Lol
Love the guy standing on the barrel .
Looks good👍👍
Bravo les gents d'atelier
Μπράβο! πολύ ωραία δουλειά
Que bien pintar al aire libre con viento tierra. Sois unos profesionales
ไทยแลนด์👍👍
Looked amazing. Lots of work involved. Now I want to do my 96 Cat 307. Thanks RUclips for getting me in over my head again lol
The paint and decals and the bucket look great. But isnt a restoration supposed to include undercarriage,engine and components,hydraulic motors pumps,cylinders and lines? All it got was a face lift
Next channel l am
Excellent video once again MMC 👍👍👍
The boys done a great job on the machine, well done 👍👍👍
Nice paint job but no strip down of the excavator 🥴🥴🥴 to give it a Restoration you need to strip the entire excavator down into its component parts to see what needs to be replaced
The welder should get all the money from this project
Poor chap cant even afford a handle for his welding helmet....lol
He's going to need it for the skin cancer treatments in twenty years.
Some bog, paint and new stickers... Boom! Full 'restoration' complete.
beautiful machine. thanks for sharing!
Çok iyi video 👍👍👍👍👍
We used to call that a 5 gallon overhaul
اعخرلعىبخابةتلىتنععيؤلفؤذذذذذذانمكجتاابةلزللومنونابخهيهءبزالمنللبابيفابياؤياهحمةررتمككموىرربباهنليببعالتنعاأىؤراكابسلنسذ
the bucket was restored 🤨the rest of the machine just repainted!
what do you think restored means 😅 retuned to factory condition.
Yea and bucket was restored but not painted. Should've been cat Yellow as well
Agree whit you. Not a restoration
Wow those chrome rods being exposed wouldn't want that overspray on mine
@@smokintruker27 dude paint dont last on buckets
Muito bom parabéns
Top video!
Ritchie Bros would be proud
Thanks, very interesting seeing this process. These guys do a beautiful job restoring this machine
They didn't restore it just painted it. A restoration would have been taking it all apart and adding a lot of new parts! That would have taken months....
Wonder of the cost of this was worth it for a machine with so many hours. Can anyone disclose how much it cost to do all the work to the machine?
Oμορφιες!!!Μπραβο σας!
Awesome👍🏻👍🏻
Great job👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Hey guys ! You should invest in an airless paint gun. Dipping in a 5 gallon pail. You’re gonna see through that paint you have there now in a couple days.
Excellent!! Welder need a mask please he will be most productive with both hands, beautiful works guys
Ever heard of sand blasting. The short way to do same job. Cheers
They look like they've done this before and probably have it under control. Cheers
Wonderful job!
great job
ωραιο βιντεο ,μπραβο !!!!
God Job
Cool 😀👍
👍👍👍Turned out great
good job gaes
Restored? Looks like a dulux rebuild to me !!
Good job and nice work
I do the same job and do the engine and bucket and the bushes very neat job guys it looks easy but it's really job make more videos like your channel
Not bad for 12 minutes work lads
That a big job. To do . That is awesome 👏
Saludos amigos muy buen trabajo felisitaciones me gusto mucho soy mecanico en houston tex saludos y muy buen trabajo 100 %
Great yards you lots of excavators, big and small
Good job
Muy buen trabajo
Как в Казахстане, покрасили и продали как новый😂
Parabéns Deus abençoe sempre sua caminhada
You did a great job, good work, very enjoyable to watch
DFDFVJGHBH BU SADECE BİR ŞEKİLDE DIŞARI GİDİYOR AMA BU SADECE BİR AŞK VE MUTLULUK ANLARI DE DEVLET VE HÜKÜMET İLE BİR ŞEKİLDE DIŞARI GİDİYOR AMA BU 666😀🍫☝️👍👍👍👍👍💔💔💔💔💔
Awesom,looks brand new out of the factory!!!
Не битый, не крашеный, бабушка по выходным в церковь ездила! Мамой клянусь!))))
Good job, looks really good 👌🏽👌🏽👌🏽
Nothing like welding that entire bucket holding a welding shield instead having a welding helmet Wtf
Sometimes we don't have those luxuries
@@andreass7124 You can buy this for 20 euros...
@@andreass7124 but the paint crew has the tools they need, not cheap tools either, but the guy working on a essential part of the machine can't even get a welding helmet? People's lives don't depend on the paint, someone can die if that bucket falls
As a trained car panel beater and painter. And worked mainly indoors with a spraybake oven approach.
This is a real credit to you bunch of guys and team effort to prep sand/ tape prime and paint this huge machine outside and sustain a great finish off the gun outside.
Looks fab. Great neat job and attention to detail guys as a TEAM EFFORT
Wawww se jeant thanke you very match forever goode job 👍👍👍👍🗽🗽🗽💪💪💪💪💪
💪💪🏿 jaime aussi
Very very good from iraq
Smart to weld that bucket with short sleeves!
And smoke a cig while doing it
Great job 👍
They only repainted it... Nothing special
@@stefaneckl6197 obviously 🙄
A quedado como recinto sacada de finanzauto. Cuantas horas tenía antes de la restauración?