Soldering CNC Connectors Properly Utilizing Kester Flux

This video covers soldering CNC connectors of various types using the proper solder, and flux combinations from Kester. This is the only brand I use in my builds, and offer in my store.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at [e-mail] or through my eBay store here. www.ebay.com/s...
Below is a link to my CNC components to build your system.
These are my new complete DS Flexion double shielded ultra flex cable motor kits including tool less mounted ground bus bar.
All required connectors are included, and all you require is solder, and flux which I can include as well. Let me know.
3 axis - 30’ - www.ebay.com/i...
3 axis - 45’ - www.ebay.com/i...
3 axis - 60’ - www.ebay.com/i...
3 axis - 75’ - www.ebay.com/i...
3 axis - 90’ - www.ebay.com/i...
4 axis - 40’ - www.ebay.com/i...
4 axis - 60’ - www.ebay.com/i...
4 axis - 80’ - www.ebay.com/i...
4 axis - 100’ - www.ebay.com/i...
4 axis - 120’ - www.ebay.com/i...
Pro-Grade CNC Electronics Enclosure Pre-Milled (EMI Shielded) 19W x 24Lx 8.75H www.ebay.com/i...
CNC Ground Buss Bar System Complete With SC25-8 Terminals And 2Ft. Ground Strap www.ebay.com/i...
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology

[@mohamedadams1922]

Marbles work. Thats what you call something made in the USA. Thanks for these valuable videos

[@corvetteguy50]

Thank you sir for your support! Vince

[@RobKernahan]

Good work again Vince, Love the GX-16 reference 😀

[@mciarlillo1309]

These videos are soo invaluable!!! Thank you for this! I know for a fact that all your vids that I’ve binged watched and rewatched will help minimize the errors on my first CNC build. Now, ideally there won’t be any issues but if there are I know it’s on me and not the information you’ve armed us with!

[@corvetteguy50]

Thank you for your support. I'm glad they help..:) Vince

[@mciarlillo1309]

@@corvetteguy50 I forgot to ask, what temperature do you typically solder the VFD spindle cables (16/4), and stepper motor cables to the aviation connectors? Thanks!

[@corvetteguy50]

I typically stay 650c (20awg) to 750c (16awg) depending the wire awg.
Always remember to test first with your particular setup as each iron is different as far as its temperature variable. Thank you,
Vince

[@TouChA0]

Thanks Mr Vince for this great work

[@corvetteguy50]

You bet...:) Thank you for your support. Vince

[@TouChA0]

@@corvetteguy50 Please any suggestion document or a book to learn braided copper for grounding thanks

[@corvetteguy50]

I honestly don't have one. Tinned braided copper is by far the best way to achieve the lowest possible resistance when combined with solder connections done properly. Check all measurements for resistance reading after installation of 2, or less (Ohms) and you should be fine. Thank you,
Vince

[@TouChA0]

@@corvetteguy50 that size you select by calculation i saw some enclosure they use short sizes but in the radio they use like the ones you build could you explain this thanks

[@Doug10106]

Thanks for all the helpful videos Sir! How long does it usually take to get a reply for quotes?

[@corvetteguy50]

Thank you for tour support. Requests for quotes are answered same day. Thank you,
Vince

[@Doug10106]

@@corvetteguy50 Ok I sent a request on the 25 through Ebay and didn't get a reply so I will try your email this time.

[@themetalfusionologist]

I just got all my motors, drivers, power sources in today and am extremely picky about my electrical being 100% correct.
Can I email you for instructions as to what I may need to get?
Wire, connections, etc

[@corvetteguy50]

Thank you for your support. Yes, my contact information is in the videos description. Please contact me to setup a consultation. Thank you,
Vince

[@foxaholic4228]

Thanks for building this and filming it. I watch all your videos and they are all very informative. I will be installing this Beast of a Unit on My Langmuir Crossfire XR Chassis. Thanks Again, Ian M.

[@corvetteguy50]

Yes, sir, and thank you again for your support, and kind words. I really appreciate it! Vince