Broken PS5 Disaster Self Clean gone wrong - Fan Connector repair again!
HTML-код
- Опубликовано: 16 сен 2024
- Yet another PS5 in for broken fan connector. Let's dive in and save the day for our customer!
Book a Repair here: www.rocket-rep...
Facebook - / rocket.repairs.southam...
Instagram - / rocket_repairs_southam...
#Microsoldering #soldering #repair "#ps5repair #consolerepair
Great information. This connector is definitely a weak point and poorly secured. I couldn’t get the plug to budge and didn’t want to pull on the wires. Had no idea the socket would come off so easily.
Me too bro, me too
Me pasó lo mismo, traté de ser lo más delicado y terminó arrancándose, simplemente venía muy flojo
Thanks for the video. I managed to pull this very, very weak connector off the board today while cleaning for a friend. I was absolutely gutted and thought that was it. But with some tips from your video(especially the braiding) I managed to secure back even stronger than before. Thanks again
I have this problem right now
I wasn't sure about the way you did the ground lugs. I thought you needed the wick soldered on 3 sides. Seems strong when you checked them. Great repair, Great video, and an education too. Thank you.
Great video! I bought a ps5 for 200$ but has a broken fan connector i will be using this video as a guide to repair my own
Stop being cheap and take it to me and get it repaired am charging as low as 600 usd dollars lol
@@jeepers18304LOL
i can give one for free, its brand new in the box and i dont need it anymore
Everytime those ripped pads.. seems to be a weak point.
I have a hard time believing those wires would ever cross. They are only long enough to go from the new pad to the pin. But its not going to hurt anything to put the mask on there.
Nice work Joey
Jamie why don’t you use solder paste and solder it’s so much stronger and easier
With the middle ground wire, why didn’t you anchor to both top and bottom as they look to be on the same trace
Definitely using this as my reference vid for my repair this just happen to me lol
I think that you should connect a wider connection to the fan voltage output connector as the original connection that it can pass more current...
hello I also have the same problem, the fan was torn off by a beginner, I wanted to resolder it but the problem is that there is a pin that I cannot solder because the track is completely unusable, where There are 3 pins, the one on the right can be soldered, the one in the middle too, it's the least complicated because it's ground but the one on the left I really can't. Is it possible to point to another location on the motherboard? thank you for helping me
I’m sorry not being a pc elitist but much prefer pc for the fact that it’s so easy to repair parts
For some reason there is much more PS5 that PS4 with this problem. I advise you to put also some hot glue around to ground to make the connector more stronger
Yeah the connections are pretty weak. I just broke mine after the 3rd time cleaning it
@@stfu7203 can you repair it by yourself?
@@ronlevin2339 nope, it's off to a repair shop in the morning
Bro cut the wire And joint two connector
What is the flux for? I've watched a few of these videos and they haven't mentioned the purpose of it
flux help solder flow and adhere to solder points. most solder contains flux but the more the better imo!
I have a question, what if you use contact cleaner instead of IPA?
What size copper wire???????
haha human hair size!!
What grinder or dremel are you using?
i wanna ask you is it ok if i used blue soldering mask insted of green
why is it not through hole?, did sony design it like that on purpose?
I just broke my shit today and this is want it needs to be fixed I just don’t know how to get ahold of someone to fix it
Where would I get the wire you're using? I've ordered the braid would that work?
we only use gootwick soderbraid, probably 1mm for this repair.
Everything works in .y ps5 except the fan. it is bot spinning. Is there a way for to make the fan spin again?
have you damaged the fan connector?
@@rocketrepairs The fan coonector is working fine but the fan itself is not working.
What size copper wire is this? 20 guage?
0.06mm
actually enamel wire .1mm
How much did you charge for the repair? I just did the same thing to my fan lol... whoops
I think this one was £120.
What size copper wire did you use?