Honda Fourtrax 300 Complete Disassembly!!
HTML-код
- Опубликовано: 6 сен 2024
- FLYWHEEL REMOVER - www.midnebrask...
ALL YOUR OEM PARTS NEEDED - www.partzilla....
DIGITAL SERVICE MANUAL - www.manualslib...
Tools Needed!
-IMPACT
-Razor blade
-Flathead screw driver or two
-10mm wrench
-8mm wrench
-Flywheel remover(link above)
-size 8 hex head socket or size 8 allen key
-size 5 hex head socket or size 5 allen key
-7/8in socket long or short
-27mm socket long or short
-17mm socket long or short
-14mm socket long or short
-12mm socket long or short
-10mm socket long or short
-8mm socket long or short
-Dead blow hammer
-light (optional)
-pick (optional)
possibly a extention for your imapct
I’m actually building a 300ex and some of the pages on the manual I had was missing and it’s been 6yrs since I last tor the engine down. This video helped a lot !
This video is gunna help me but I still need to learn more bc I am building a mud bike so a 20% gear reduction and a wosco dome piston is going in my 300 and this would be my first time taking my motor apart I've never seen the inside of my motor besides the starter part I am nervous bc I dont have any extra motors to practice on first so wish me luck and I'm prolly gunna watch the video while I take it apart lol
Get with Greg Junior on Facebook for your top end needs if you haven’t already bought your stuff! I’d definitely recommend 40% at minimum or 60% GR if your wanting to build a mud bike
are you able to remove the crank shaft without removing the transmission parts.
Yes
How can I make sure my shift forks aren’t bent? They seems to be right, but I want to make sure they are correct before I reassemble.
Not entirely sure of the proper way. But I would just set them on the table and get eye level with them to make sure one side isnt lifted up. Or they don’t have a weird rock to them when sitting on the table. Other then that I would just send it
do we need to remove everything like you to have access to transmission gear? like removing the motor from the atv?
yes
if you pull that output shaft with the motor still in the atv it will drop every transmission gear and you will have no choice but to pull the motor no matter what. actually very simple to these motors!!!