Van's RV-12 Build: Wheels On the Floor
HTML-код
- Опубликовано: 28 авг 2024
- A big milestone in any kit project is getting aircraft to stand on its own feet and that's what the RV-12 build team has been working on. This build Vlog offers a detailed look at what it takes to install the landing gear, tires and brake hardware.
Looking good!
I built a RV 4 and found Richard to be a pain in the a$$ to deal with, hope it’s different today
What they don't tell you about the wheels is that the struts come with a +6* camber on each main wheel/tire and that unless you are flying consistently at gross, you will find the outer 1/3 of the tire will wear down to the cord (while the inside tread is still almost full depth) in 150-200 hours and then have to flip the tire (or, you do like I did and have 2-4.5* shims made to reduce the camber to +1.5* for each wheel --- I've added nearly 500 hours to the tires since then and have been getting equal wear across the entire width of the tread. I typically fly between 1000 and 1150#.)