Got mine 2 days ago in Germany for my imported 2023 F-150 Raptor. Installed them and was confused, because the passenger side was 180 degree turned around. Couldn't figure out what I did wrong, until I watched your video. Somehow they forgot to add that small adjustment tool to my shipping. I got only the puddle lights, but nothing else. Had to improvise to align them, but now they are looking awesome! Thank you for your video, that was a great help.
So awesome! I’m glad you got them on that badass 23 Raptor now. I sure hate they didn’t include the adjustment tool. But I can understand how it can be manipulated using some small metal pins. Glad you got em working right. 👊🏼
Installed these lights on my 24 Raptor. They look fantastic but half of the logo is on the door, I need to rotate the image by 45 degrees but can’t for the love of god figure out how to rotate it with the provided tool. Any help?
Take the tool in your fingers and put the two open end pieces on the light in the two holes. Turn it. It’s tough to move, so get tough with it. You won’t break it. My fingers were sore by the time I was done. lol. Be sure to let me know if you got it.
These are awesome. On the Ford bronco raptor the fender stick out so far that only have the light shows on the ground. And I have adjusted it still is not filling on the ground unless you open the door. Aside from that they’re fun.
I bought a folding cover for a full-size truck 8-foot bed. It did seal protect and was very waterproof. But the awkwardness of using it outweighed any benefits. The lid was very heavy aluminum and foam in between. Gets hot quickly. You had to unlatch it from the underneath. By reaching up inside and releasing the latches.One on each side. Lift that section and gently set it down on the other. I burned my fingers and I dropped on the next section putting a nice dent in it. When you opened it all up you still had that third section to deal with. You could place it beside the back window. But it recommends that you don’t drive with it there. Too much wind resistance. And everything wants to slide up front. Where you can't reach. So bring a pole with you. As you can guess not a big fan. I kept it for a year but the bad outweighed the good. So I just gave it away. Dont miss it at all . Went with a Roll N Lock.
Mike, I got my trifold from the dealership & they put it on,haven't had a problem in 5yrs, some places don't know what they are doing. Ck your dealership where you got your truck from, I also have swing cases mounted too and that's more storage to, hey I ordered me some of those puddle lights too 👍🙏
Awesome on the puddle lights. You’ll love em. Hmmm, ok I will definitely talk to my local dealership when I round up some more cash about a bed cover. Thanks brother. 👍🏼
I got my answer back from MVP. Although I didn’t contact Moe. Himself the answer that I got back was not the one that I was hoping for. The email said that they used to make them. But had so many complaints and problems that it wasn’t worth the effort. I have a set of the Ford ones with the oval. And it works great. So far. I have the emblem that I want in the light. Now I just have to find someone to put it together so that it works in that 2017 Silverado puddle light. Does anyone know of someone that does this type of work? Please contact me.
Man I tried one of the $1000 tonneau covers and kept having issues. I got the black low profile tool box for now, but may switch back to a different brand bed cover one day. 🤙🏼
Really nice customerzation mike, done contact moe about the lights. Now have you got your spare tire yet, and you need roadmaster active suspension traction system, cause you've got axal wrap going on right now with out that kit 👍🙏
These look like great quality. I ordered mine and they just showed up, but they don’t fit our Bronco. I could see how nice they were when I held them in place, but the contacts wouldn’t stay in place. I had to put my originals back in. Hoping it was just a fluke set🤷♀️Loved your video though!
Got mine 2 days ago in Germany for my imported 2023 F-150 Raptor.
Installed them and was confused, because the passenger side was 180 degree turned around. Couldn't figure out what I did wrong, until I watched your video.
Somehow they forgot to add that small adjustment tool to my shipping. I got only the puddle lights, but nothing else.
Had to improvise to align them, but now they are looking awesome! Thank you for your video, that was a great help.
So awesome! I’m glad you got them on that badass 23 Raptor now. I sure hate they didn’t include the adjustment tool. But I can understand how it can be manipulated using some small metal pins. Glad you got em working right. 👊🏼
Installed these lights on my 24 Raptor. They look fantastic but half of the logo is on the door, I need to rotate the image by 45 degrees but can’t for the love of god figure out how to rotate it with the provided tool. Any help?
Take the tool in your fingers and put the two open end pieces on the light in the two holes. Turn it. It’s tough to move, so get tough with it. You won’t break it. My fingers were sore by the time I was done. lol. Be sure to let me know if you got it.
Thank you, following your instructions I finally managed to align the lights with the tool, it was quite difficult to turn though.
@rohanmisquith glad you got it. Yeah my tool actually bent a little while turning. Lol. I bet yours looks amazing.
Got ours in today. Gonna put them in this evening!! Can't wait
Awesome!!!
These are awesome. On the Ford bronco raptor the fender stick out so far that only have the light shows on the ground. And I have adjusted it still is not filling on the ground unless you open the door. Aside from that they’re fun.
Dang Mary I sure hate that they aren’t fully showing unless you open the door. But thank you for viewing my video. I bet that bronco is so sweet!
Bro those are sick!!!
Gonna have to cop me som💪🏽🔥🔥
Thanks brother. I couldn’t believe how sharp the edges turned out. Super bright too 🤙🏼👊🏼
@@LivinWith3M things are killa🔥🔥
I bought a folding cover for a full-size truck 8-foot bed. It did seal protect and was very waterproof. But the awkwardness of using it outweighed any benefits. The lid was very heavy aluminum and foam in between. Gets hot quickly. You had to unlatch it from the underneath. By reaching up inside and releasing the latches.One on each side. Lift that section and gently set it down on the other. I burned my fingers and I dropped on the next section putting a nice dent in it. When you opened it all up you still had that third section to deal with. You could place it beside the back window. But it recommends that you don’t drive with it there. Too much wind resistance. And everything wants to slide up front. Where you can't reach. So bring a pole with you. As you can guess not a big fan. I kept it for a year but the bad outweighed the good. So I just gave it away. Dont miss it at all . Went with a Roll N Lock.
Awesome. Thank you for that assessment 👍🏼
Mike, I got my trifold from the dealership & they put it on,haven't had a problem in 5yrs, some places don't know what they are doing. Ck your dealership where you got your truck from, I also have swing cases mounted too and that's more storage to, hey I ordered me some of those puddle lights too 👍🙏
Awesome on the puddle lights. You’ll love em. Hmmm, ok I will definitely talk to my local dealership when I round up some more cash about a bed cover. Thanks brother. 👍🏼
Nice 👍🏻 Mine just showed up today!
Awesome Jay. Let me know how they look once installed brother. 🤙🏼
Hi, awesome video! Have you had any sort of issues so far with this mod? I am interested in purchasing this for my raptor.
Thank you. Nope no issues at all. You will love these lights as they get comments all the time from people. 🤙🏼
I got my answer back from MVP. Although I didn’t contact Moe. Himself the answer that I got back was not the one that I was hoping for. The email said that they used to make them. But had so many complaints and problems that it wasn’t worth the effort. I have a set of the Ford ones with the oval. And it works great. So far. I have the emblem that I want in the light. Now I just have to find someone to put it together so that it works in that 2017 Silverado puddle light. Does anyone know of someone that does this type of work? Please contact me.
Ps. Truck needs a bed cover too 😊👍
Man I tried one of the $1000 tonneau covers and kept having issues. I got the black low profile tool box for now, but may switch back to a different brand bed cover one day. 🤙🏼
Hmmmm. Might need some platinum ones 😅
We can take care of that for sure!!!
Should of been standard, like a Mustang..Cool, best I order some..Thanks 😁
I do agree. Awesome, glad you got yours ordered! You are welcome bro. 👍🏼
Really nice customerzation mike, done contact moe about the lights. Now have you got your spare tire yet, and you need roadmaster active suspension traction system, cause you've got axal wrap going on right now with out that kit 👍🙏
Thanks bro. Man I know, I definitely gotta get on the spare tire the road master suspension to keep that rear axle stable. I appreciate it man. 🍻
Nothing for GMC Chevy Escalade trucks
If you contact him he will make them. Even if it don’t show on the list. 👍🏼
Thanks for that bit of info.
You are welcome 🤙🏼
These look like great quality. I ordered mine and they just showed up, but they don’t fit our Bronco. I could see how nice they were when I held them in place, but the contacts wouldn’t stay in place. I had to put my originals back in. Hoping it was just a fluke set🤷♀️Loved your video though!
@mindyweitzel5980 I am so sorry they didn’t fit your bronco. Reach out to them and I hope they will take care of you on that. 🤙🏼