Видео

Just got my First ever mustang! I’m not too mechanically inclined, but this video gave me the confidence to do it! One question did you use the platinum or copper spark plugs

If going by the letter of the law, the registration number on the card is incorrect. There should be a space after the numbers, prior of the last two alpha characters. Not in North Carolina, but Maryland Natural Resources issued my a citation for the registration characters and numbers not having a space between. The boat was 8-10 years old when I purchased, and I owned it for 4 years. The boat was moored 500 yards from one of the DNR substations. They drove past it for years, then one day, wham, you need to correct this.

Drive through and next to wooden fences or walls 😂 hear that loud rattle and it’s just so unsatisfying

Lucky you got 4 years! Mine went out in 38 months. Not covered under extended warranty. Charged me $120 to diagnose and said it would be $800+ to replace! Just bought a new aftermarket off ebay for $140. Figure maybe the after market brand would hold up better that Ford POS. Couldn't be much worse!

Nice 👍🏻 Mine just showed up today!

I would not put the oil from the catch can back into the crank case. There is often a lot of moisture in the catch can (especially in colder weather) that mixes with the oil. You don’t want to be putting that back into your crank case.

Awesome update video bro! Im not sure if I need one with a naturally aspirated truck, but I plan to get one just to see what fills up in there. I wonder why Ford doesn’t just make catch cans standard 🧐 I love all the humor bro! “Dump it in the neighbors yard!” 😂😂😂😂

Skips the exact part of the process I needed to see... how to remove the handle with the Allen key. Frustrating.

Is this not a safety concern with children in car seats? Any info would be greatly appreciated.

Great video. Thanks for the info, looking forward to people not flashing me. Your truck looks great.

Which hood deflector do you have installed on your hood? Please let me know thanks! I have the same truck in fire red. Also going with black on red. Thanks !

Your video was very helpful. Thank you.

I had 2014 f150 and had a 6 speed transmission with a 5.0 should have kept the truck . The truck I have now 3.5 eco boost 10 speed and had problems with the transmission but because it learns as it goes smoothed out over time now has 86000 miles and now cold start rattle from the phasers have to prime it when cold and pump oil up into the phasers cams noise stops when warm. I am babying it until I find something else.

Nice looking Limited. Did you look into installing the automatic running boards? I just bought a 2024 Limited 4WD 2 row, the 2024's have an option for automatic running boards. I was unable to find a 4WD 2 row Limited with the auto boards, so ultimately bought one without them. Looks like Toyota is putting the auto boards mostly on the 3 row Limiteds. There are aftermarket automatic running boards available, but I'd prefer the OEM version, which is only a factory installed option apparently, and not a port or dealer option.

Loved my 5.0

What a great tutorial. Thank you. Life saver forreal.

Was at it for 30 minutes… thank you for saving me a trip to the dealership 😂😂

Do you utilize adhesive promoter?

Quick question but what’s that radio kit I need to replace mine and I see that yours is a snug fit

It’s really a good idea to burn those without the gas on.

I still don't see no after market cold air intake?, you got the baby separator, I've got the mega can quart size, I know a couple of things that you can Z, a extra movie star

Dude thank you so much for this!

Do you by chance know how much it will cost to fix the cat converter?

Hell of a video, I’m going through all of this right now and it’s ridicules, I haven’t even had the truck that long 3 yrs, the car converter is definitely rattling, it’s at the dealer right now they’re getting new fazers and my valve cover gasket are leaking once again I’m about ready to get rid of the truck, I love it when it’s running but the last 4 months it’s cost me 5k

Have ever seen a engineer with a brain?

I have been wanting to do this but people say that it overcharges the battery and this and that. Does the battery charge fine?

I like the way you have the grill, did you buy it aftermarket or have it painted?

Hey that looks great where you ordered i want one of those for my 2018 one

Nice easy mod and great video and details! I don't like that it's pulling the oil line towards unscrewing and could potentially rub eventually springing an oil leak on a hot turbo exhaust housing. Is there a reason you can't add some tension to the arm at the adjustment nut? Does the vehicle then compensate for that when it's warm and change the zero point for the solenoid?

THANK YOU for your video. Two months of trying to figure out the problem but never suspected the cowl. One hour to get a replacement cowl and 15 minutes of work and all fixed!

Found your video. Won’t help me with a 2024 RAM Power Wagon. I’m trying to put a 35” up under the PW on a 20” wheel. Don’t think I can do it same way. Bummer.

What headlights are those?

2014 Taurus SEL, passenger side is the same? I blow my mind and break my hand tryin to find that bulb.

You saved me a lot of time and frustration. Thank you!

How did you get Mechanical part out of the Door????????

Bro! Much respect! 🫡 You put some serious work into this video!! David got some great shots of Zeus! Definitely professional! Truck is looking great!!

Thanks for the heads up on this issue. My Colorado Ford dealership gave me a sight unseen estimate of $3,000 to replace the injectors for the "rattle" issue, which as we know is corrupt on their part. My local ace hardware had a close-enough spring: 7/16" width, 5 inches long, that I cut and bent to be 3 1/2" Overall Length. The spring section itself was 2 1/8" long. The 3 1/2" length gave consistent gentle pressure to the gate valve linkage.

Didn’t work for me because the light never came back on to do the final buckle/unbuckle. 😩 2021 Escape

How many inches is it?

‘Unless it sounds like a damn duck call’ had me cracking up 😂

Did you remove the heat shield for the spare tire to make it fit?

That style was the 6th generation not the 4th. The 6th was the final generation of the Taurus.

Perfect video! I opened the box and saw the extra parts and rivets and was pretty confused. This cleared that right up.

I have a 2018 raptor I get a rattle when accelerating when I get to about 25 mph the rattle lasts for about 2 seconds then goes away.. mechanic shop tried to tell me it’s my timing belt but I don’t think they put it in 4wd when they test drove it, when in 4wd it’s makes no noise?

We have a 2018 F150 with the 3.5 eco-boost. It currently has 52,000 km (about 32,000 miles). It started rattling the other day and I'm told that it needs cam phasers and a timing chain. $4000 repair less than six month after the warranty expired. If you're thinking of buying Ford, don't.

Thank you sir, very helpfull

Good to know , just bought a 2021 Chevy Silverado 1500 LT . Going from factory to 33’s with a 3.5 in lift.

What size of spring is that

If your trucks past the 60k mile or whatever warranty. Your better off just replacing the cam phasers when needed. The extended warranties cost twice as much as the repair does lol

"You hear a sound, and it sounds like nothing here on this earth" 😂😂😂