Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
Why would you do that? There is literally no benefit to welding them together, but there's plenty of disadvantages like warping, and compromising the bearings themselves. What a fu€|
@@wesman7837 lol but it didn’t do any of that..did it? Did your great great grandfather invent bearings or something? Lol you took this video so personally 🤣 you’re correct on the heat warping but with tac welds like that, you’ll never reach a temp high enough to seize them, especially when you take time breaks in between tacs or swapping from one to another. Now, if he was using an arc welder, then yes, he’d be an idiot but since he is using proper tools to make a HOMEMADE project, he’s perfectly fine…you sir, are the TOOL for the poor logic critiques. If you don’t agree, go make your own how to DIY vids…I’m sure we would all love to see what a genius, like yourself, can come up with while ALWAYS using the correct tool; no ifs, ands or buts!
I know. I was like "if you're skilled enough to weld bearings and have them still be functional, you make enough as a welder to afford a real tool. Or at least a pipe to slide over the bearings for a friction fit.
I dont think the end use here qualifies as "under load" in the context of your warning. It not like they are spinning at anywhere near usual bearing speed. And not close under usual pressure.
No actually it's not, although personally I would use recycled bearings but this is a great way to save a good $$$ investment in a profesional one when you might not be able to justify that cost if it's something you don't use regularly and even if you did, this one is small enough to be portable to a degree and so what if he toasts a bearing or two they are not exp and even less exp of you get them used as many times bearings get replaced if one of the bearing balls gets a flattened head so normal use for the bearing is finished but they are still in excellent shape and would work perfectly here, and used ones you can get for free many times just check outs metal recycling place. As for the build, the key here is not to put to many spot welds and the small ones he does would not compromise the integrity of the bearing for this application as long as they are minimum amount of weeks needed and fast. This is honestly a fantastic way to recycle parts I do it all the time in my shop he'll I'm still using my grandfather's shop Smith all in one so please stop the using on people doing good diy projects like this.
Ооооо чудо. Он 3 недели готовил это изобретение. Испортил 12подшипников по 120р за шт. Ну про уголок и полоски ладно не считаю. Тисы разобрал. Сверло по металлу купил. Лифмашинку и отрезной круг. Спалил немного проволоки и углекислоты! Все для того, чтоб загнуть жестяночку. Можно было ее просто намотать на трубу нужного размера!🤣🤣🤣🤣🤣 Только не говорите автору это. А то он начнет стоить завод по производству труб!
@@oksanahutsalova8054 так твой пихарь и бежит от тебя в гаражи, лакать пиво и в картишки перекинуться, по причине твоего длинного носа, который ты суешь не в те отверстия.... Иди в соседний обсуд, там пудра на вкладке....
@@user-dg4wv9qg8k он же не проваривал весь контур так слегонца прихватил. Перегрева не было деформации тоже. Можно было бы проигнорировать данную операции и оставить пачку прижатой болтами. Но так работает его феншуй. В нем нет недостатка
Хотел только написать это, но смотри как он вышел из положения но не акцентировал внимания на том что после одел кусок трубы на подшипник и провалился к ней уже🤣🤣
The welding is cool and all, but using everywhere like this makes this gadget completely unserviceable. If there's a design flaw or anything wrong with any of the components, you have to break out the grinder or scrap it
I remember when I was a kid, there were machine shops everywhere. I never got to do machine shop in school, but wish I had. A fantastic, necessary skill, in which, most work has moved offshore and most kids nowadays will never be exposed. Sad.
Don't listen to the haters. Skill and knowledge of the materials and what they are capable plus welding knowledge are all you need as you showed, however it might be good to add a note reminding anyone that wants to copy your idea to know what sections of the bearing can be welded safely and to not use to many spot welds or it can overheat and sieze the whole bearing. Awesome idea BTW 😺
Muy buena idea, pero se puede mejorar fabricando un casquillo para los rodamientos porque con la soldadura se dañan no es recomendable soldarlos, pero si la idea es buena.
За 6к купил вальцы, с доставкой, прокатывал дуги на парник, из квадрата 60*60! Можно в ручную катать, а можно и хорошим шуриком.... А здесь столько материала загублено, чтобы полоску из миллимитровки загнуть...... 🤔
🤔 scomodo dover smontare le ganasce e poi rimontarle per poter usare quel attrezzo , forse un sistema ad aggancio e viti a farfalla per bloccare era più funzionale 🤗
Приваривать к подшипникам) И вообще, зачем тратить так много времени и сил на изготовление "этого", если проще купить готовое изделие в магазине? 250 полуляхов
The most important thing with soxial media welding videos is to outrage everyone so the comments on the video won't stop appearing and you'll monetize better with such engagement. Never make a video that people won't have nothing to be outraged about because that won't make much money.
Who else had a stroke when he welded the bearings
Why would you do that? There is literally no benefit to welding them together, but there's plenty of disadvantages like warping, and compromising the bearings themselves. What a fu€|
@@wesman7837 lol but it didn’t do any of that..did it? Did your great great grandfather invent bearings or something? Lol you took this video so personally 🤣 you’re correct on the heat warping but with tac welds like that, you’ll never reach a temp high enough to seize them, especially when you take time breaks in between tacs or swapping from one to another. Now, if he was using an arc welder, then yes, he’d be an idiot but since he is using proper tools to make a HOMEMADE project, he’s perfectly fine…you sir, are the TOOL for the poor logic critiques. If you don’t agree, go make your own how to DIY vids…I’m sure we would all love to see what a genius, like yourself, can come up with while ALWAYS using the correct tool; no ifs, ands or buts!
I did .-.
@@flyfish697 the issue with welding bearing is you ruin the metal's temper
@@benjamindavies1188 looks fine to me…? Lol his design worked flawlessly…
В любой непонятной ситуации приваривай подшипник
©Доктор Дью
Я тоже так подумал .
Это просто рай для глаз, когда вижу как варят подшипники😂
Зашёл, думаю по-любому от Матвеева есть кто то, и о да! Подшипники и сварка ммммммм...
Ооо...да...
Подшипники варят☝😳👈
Полуляхами замерить бы🤣👈
@@witowleo9118 250 из 250
You know it's gonna be a shit show when he started to weld bearings
What’s with these crap hints.
My thoughts exactly
Weld a bearing in every non-understandable situation)
I said the same thing but that is a pretty inventive ring roller.
I know. I was like "if you're skilled enough to weld bearings and have them still be functional, you make enough as a welder to afford a real tool. Or at least a pipe to slide over the bearings for a friction fit.
Каждый уважающий себя DIYщик должен хотя бы раз в жизни приварить подшипник...
Главный атрибут любого диайвая - приваренный подшипник
Приваренные подшипники, это круто. Круче только Чак!
Welding bearings is the most гетагded idea I've ever seen
Why can't u say Retarded?
Don't worry about it, he pay for not you
Careful welding to bearings. They're very hard high carbon steel and are very likely to blow apart under load now
I dont think the end use here qualifies as "under load" in the context of your warning. It not like they are spinning at anywhere near usual bearing speed. And not close under usual pressure.
This DIY is accectable for an idi.ots only.
No actually it's not, although personally I would use recycled bearings but this is a great way to save a good $$$ investment in a profesional one when you might not be able to justify that cost if it's something you don't use regularly and even if you did, this one is small enough to be portable to a degree and so what if he toasts a bearing or two they are not exp and even less exp of you get them used as many times bearings get replaced if one of the bearing balls gets a flattened head so normal use for the bearing is finished but they are still in excellent shape and would work perfectly here, and used ones you can get for free many times just check outs metal recycling place.
As for the build, the key here is not to put to many spot welds and the small ones he does would not compromise the integrity of the bearing for this application as long as they are minimum amount of weeks needed and fast. This is honestly a fantastic way to recycle parts I do it all the time in my shop he'll I'm still using my grandfather's shop Smith all in one so please stop the using on people doing good diy projects like this.
@@LittlestrawberryfoxSo why not press fit the bearings into some tube and do it properly? This is just a hash job.
250 полуляхов из 250
Зря ты так! Тиски то не испорченные!.. И вещь целиком рабочая. И тиски целые, учти!
Ну да!.. 49 тысячи 900 милиляхов там точно будет!
Пойду в гараж наделаю завитушек из полоски железа.. Каждый день так делаю..
Доктору ссылку уже скинули?)
That is pretty cool, but welding directly to bearings seems like a crime to me
Thats not welding thats tacking
Agreed, this is also non serviceable, so, even more of a crime.
@@LUK42.0 irrelevant. A tack weld is still a kind of weld
@@thedudeamongmengs2051 is not.
@@joshpiotrowski3487 yes…it is
Вызывайте Доктора!
Не поможет, нужно отобрать подшиБники.
@@SshAleksandr ПодподшиБники 🤣
@@user-kz2cz7kk8l подшипники после сварки превращаются в подшиБники.
Да и так понятно, что 250 😅
Он уже в названии канала присутствует
Замечательная поделка, все 250 полуляхов заслуживает
Ооооо чудо. Он 3 недели готовил это изобретение. Испортил 12подшипников по 120р за шт. Ну про уголок и полоски ладно не считаю. Тисы разобрал. Сверло по металлу купил. Лифмашинку и отрезной круг. Спалил немного проволоки и углекислоты! Все для того, чтоб загнуть жестяночку. Можно было ее просто намотать на трубу нужного размера!🤣🤣🤣🤣🤣 Только не говорите автору это. А то он начнет стоить завод по производству труб!
😄😄😄Убил
😅😅))😂😂))🤣🤣))😅😅))🤣🤣))😂😂))
Лучше придумывать что-то новое, чем лакать пиво или резаться в карты.
@@oksanahutsalova8054 так твой пихарь и бежит от тебя в гаражи, лакать пиво и в картишки перекинуться, по причине твоего длинного носа, который ты суешь не в те отверстия.... Иди в соседний обсуд, там пудра на вкладке....
Сваркой по подшипникам. Ммм. Красота. 250/250 полуляхов.
Welded bearings will be fine in this application. Very nice job 👏
А если подшипники между собой не сварить они крутится что-ли не будут????????? Нахрена?
Зато точно не сопрот, будут совместно крутится. Сама идея регулируемого домашнего гибщика интересна. Исполнить можно по разному
@@Alexey-85 Но не подвергая подшипники издевательством сваркой
@@user-dg4wv9qg8k он же не проваривал весь контур так слегонца прихватил. Перегрева не было деформации тоже. Можно было бы проигнорировать данную операции и оставить пачку прижатой болтами. Но так работает его феншуй. В нем нет недостатка
Как и особых достоинств оба варианта на мой взгляд одинаковы
Это ведущий ролик, если не сварить, будет крутиться только самый верхний подшипник, к которому приварена ручка
Срочно доктора у пациента болезнь подшипник
У автора видимо возникла непонятная ситуация 😂
Если , непонятная ситуация , нужно приварить подшипник но , судя по этому ролику , ситуация вообще критическая .
I just had a stroke from seeing you weld directly to bearings
Варить подшипник!?Сразу видно "крутая вещ" получится
Хотел только написать это, но смотри как он вышел из положения но не акцентировал внимания на том что после одел кусок трубы на подшипник и провалился к ней уже🤣🤣
А самое главное, что долговечнее, об этой самоделке можно говорить часами, внуки офигеют, какой их дед был (рукодельник)
-Доктор Дью, у нас тяжелый случай!!!😂
You just welded a bearing race…put the tools down and walk away.
Гениально
🤔 How will they continue to generate their senseless clickbait, then? 😆
В любой непонятной ситуации вари подшипник
Насечки для слабаков, надо пихать прут силой, а крутить для видимости работы
Красавцы!!!!
Удачи вам парни!!!!!
Храни вас ГОСПОДЬ!!!!!
Глаза! Мои прекрасные глаза!🤦
The welding is cool and all, but using everywhere like this makes this gadget completely unserviceable. If there's a design flaw or anything wrong with any of the components, you have to break out the grinder or scrap it
But there wasn't and he didn't
ok? you think the guy with all these materials and shit cares if he breaks a part? hes got 50 more sitting around for these videos.
I suspect the spirit of this channel is to angle grind it off and make a new one. Kind of a shame.
Хоть и подшипник варёный, но тиски не испортил! Прикрутил обратно губки и работай!
За неиспорченные тиски лайк!
I doubt those bearing still work
They do for what his intention was
I like watching these videos and seeing how things could be fabricated in a custom way. Thanks for the upload 😊
In any incomprehensible situation, weld the bearing
Who the hell welds roller bearings
The guy in the video did.
@@unclepecos845 lol, true)
В любой непонятной ситуации приваривай подшипник!
That'd be a roller my brother. Bender bends things. Rollers roll things. Love it tho! Great job!
I remember when I was a kid, there were machine shops everywhere. I never got to do machine shop in school, but wish I had. A fantastic, necessary skill, in which, most work has moved offshore and most kids nowadays will never be exposed. Sad.
Ahhh capitalism
Приварил подшипник к шпильке - рука-лицо
Ооо дааа Доку это понравится!
Don't listen to the haters. Skill and knowledge of the materials and what they are capable plus welding knowledge are all you need as you showed, however it might be good to add a note reminding anyone that wants to copy your idea to know what sections of the bearing can be welded safely and to not use to many spot welds or it can overheat and sieze the whole bearing. Awesome idea BTW 😺
Варёные подшипники... Классика!!!!
Повелитель металла😁🔥
Así es como surgieron las miles y miles de herramientas que es xisten y seguirán creciendo. Creatividad, ingenio. Excelente !!
Т.е. то, что у подшипников опустилась закалка и они стали пластилиновые, и возможно внутри расплавится пластиковый сепаратор - это нормально.
Это все так и задумано!
Походу точно хуета 😳👈
I too like my bearings nice and crunchy and not precision ground anymore
сваривать коленые подшипники, это точно на все 100% надежно
Muy buena idea, pero se puede mejorar fabricando un casquillo para los rodamientos porque con la soldadura se dañan no es recomendable soldarlos, pero si la idea es buena.
Поиду во круг трубы завальцую))
The step drill is the mark of every hack.
В любой непонятной ситуации - приваривай подшипник!)))
Excelente ideia! Parabéns!
That is so cool man😲
Nice👍👏👏
I would've pressed fit into a sleeve instead of welding. Better smoother finish.
Great idea
Подшипник. Крутая идея для чего-то,что бы затем в утиль..
Totally Awesome Craftmanship. 👌 👏 👏
He literally welded the bearings core with its outside. It's just a cylinder now. Wow.
Dude you are as smooth as the music that you play in the back ground. Well done👍👍👍
Me agrada esa broca. En dónde venden dígamelo .y gr por. Pista maestros .
Ótimo trabalho 👏👏👏👏
Ну наконец-то ,хоть кто-то приварил подшипник
Ещё один ненормальный подшипники варит🤦♂️
За 6к купил вальцы, с доставкой, прокатывал дуги на парник, из квадрата 60*60! Можно в ручную катать, а можно и хорошим шуриком.... А здесь столько материала загублено, чтобы полоску из миллимитровки загнуть...... 🤔
Варить подшипники???
250
Молодец дружище Отличная Самоделка👍👍👍👏🤳😁👆✌️👉👍👍
Сваривать подшипник гениальная идея.
🤔 scomodo dover smontare le ganasce e poi rimontarle per poter usare quel attrezzo , forse un sistema ad aggancio e viti a farfalla per bloccare era più funzionale 🤗
Аж глаза зажгло, от того как варят подшипники.... Доктор Дью, помоги!!!
Lindo trabalho!
Excelente!
Мне бы такие руки, что бы сверлить точное отверстия с такой разметкой.
А ты разве не знал, что все крутые рукожопы (простите мастера) размечают только маркером? Причём чем толще тем точнее получается.
@@dmitryk4992 ..."точность попадания компенсируется диаметром снаряда"...
Сваривать подшипник это шедевр
Доктор! Тут диайвайщик подшиБник приварил!
Доктор Дью видел это?
На досуге, разбери хоть один подшипник и посмотри, что получается В МЕСТЕ КОНТАКТА ШАРИКОВ С ОБОЙМАМИ!
В любой непонятной ситуации приваривай подшипник 😂
Идея хорошая ! Но Исполнение на 255 из 250!
Если приваривают к подшипнику - можно листать дальше
Сварка подшипника ну-ну... 👍
В любой непонятной ситуации приваривай подшипники.
После сварки подшипника дальше можно не смотреть.
А ведь можно было обойтись и без приваривания подшипников
Гений,варить к подшипнику
Auf Wälzlager zu schweißen macht ja richtig Sinn. Eine einfache Gleitlagerung ist die Bessere Wahl.
Приваривать к подшипникам)
И вообще, зачем тратить так много времени и сил на изготовление "этого", если проще купить готовое изделие в магазине?
250 полуляхов
В любой непонятной ситуации просто приваривай подшипник
В любой непонятной ситуации приваривай подшипник
The most important thing with soxial media welding videos is to outrage everyone so the comments on the video won't stop appearing and you'll monetize better with such engagement. Never make a video that people won't have nothing to be outraged about because that won't make much money.
Хорошо хоть сварка не электродом.
The tool was great and useful
Что бы не тратить столько подшипников и не сваривать их, можно пользоваться трубками
Доктор! Доктор! Тут опять подшипники варят, срочно выезжай
Ingenio y creatividad 👍🏻👍🏻👍🏻
Варить к подшипнику- наше всё !
Everyone is commenting about welding the bearings, you can choose not to. I'm more concerned about using the angle grinder on the copper pipe.
Souder des roulements ça doit super bien tourner
Good work...👍✌
What a fuxxing brillant Nice Idea, Beautyfull, Bravo Bravo and thank you.
Me gustó tu trabajo, pero, me gustaría que me digas qué tipo de soldadora empleaste, si es TIG o MIG,
The music gets me everytime tho.🎶🎛🙏🏾
Glad everyone in the comments agrees that welding bearings is shit 😂
Идея хорошая но зачем подшипники приваривать,
Куда же без приваренных подшипников!!??))
That was badass!
Sir we want your workshop tour