Ron’ great video, nice idea regarding the stern light. Painting the deck section on the clear rear patt would look good and cover your lighting wire. Happy everything Ron.😊
What a wonderfully cosy episode, Ron. You really are something - a perfect antidote to all the "stuff" that life throws at you. Please try the little lamp! Is there some way of roughing up the light's surface? It might shine better "sideways" having a surface detail rather than that shiny exterior 💡
Hi Ron, nice episode. How about removing the plastic first, like carefully filing it away, for the light and then all that’s left to do is just drill a hole for the LED to fit through. Might be easier rather than having to drill the hole the complete length of the plastic as after all you’ll need to remove some plastic anyway.
Tell Max I worked diligently with the Canada Post to get that there in two months and on a day when he needed something to make him smile. Thank you both for the kind words. See ya. JimE
Go for it Ron. It will work. Add a piece of foil to the top and back side of the shell of the lamp holder, before paint to block the light. Running the wires as you said are prefect. Good luck. BTW, Nigel is one cool dude, been watching hm for a bit Cheers kiddo.
Hi Ron enjoyable watch yet again, how about trying the led on a scrap pice of plastic first to see what the effect looks like - Cheers Mike (Wellington)
@roncalverley Yes, the sub is really looking good! Thank you, Ron, I really enjoy watching your videos... so, when I miss a few episodes, I definitely want to check them out so I know what's happening. Thanks again! 🙂 👍
Great episode Ron. Probably too late but Tara had the thought of leaving the plastic lense in place after you drill and just letting the light shine through. Take care n see you next episode.
Good morning Ron great show and a brilliant idea of yours re light. I say go for it lol. Pizza 🍕 looked yummy as per. Great to see max and missy Ron please tell me what that long black and yellow thing is every time you say max and missy you grab hold of it I keep asking myself what the hell is that thing. Anyway you take great care and catch you tomorrow regards Rod 🎉🎉🎉
Hi Ron yes a white light on the rear lol I actually looked it up and yes it’s white 😊😊😊, we’re expecting 42c this week, so not looking forward to it 😂😂😂don’t want to mention humidity! I know you don’t want to but it would look better if you painted the rear and left a window for what needs to be seen, but that’s just me 😊😊😊😊see you tomorrow
Hi Ron, your thought process for the stern light is great. On going forward, would it help to put a spot of paint on top & one side of the led, if concern is it glowing through the plastic?
Ron...Here is an idea that might work. Could you paint with the air brush all the smaller parts still on the spru all at once. They would be easyer to hold and you could lean them up to dry Then remove them and clean them up. After that touch them up with a paint brush.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Ron’ great video, nice idea regarding the stern light. Painting the deck section on the clear rear patt would look good and cover your lighting wire. Happy everything Ron.😊
👍
What a wonderfully cosy episode, Ron. You really are something - a perfect antidote to all the "stuff" that life throws at you.
Please try the little lamp! Is there some way of roughing up the light's surface? It might shine better "sideways" having a surface detail rather than that shiny exterior 💡
👍
Every morning I need my: 'coffee sip......aaaaaah.....Good morning welcome to Winnipeg!
Good morning, coffee is always good. 😁
Hi Ron, nice episode. How about removing the plastic first, like carefully filing it away, for the light and then all that’s left to do is just drill a hole for the LED to fit through. Might be easier rather than having to drill the hole the complete length of the plastic as after all you’ll need to remove some plastic anyway.
Good point!
Getting closer to your kind of Winter weather Ron! Little bit of snow and 20 degrees Fahrenheit! No beach day this week 😂
Yes, it's getting cold out there! 🥶
Tell Max I worked diligently with the Canada Post to get that there in two months and on a day when he needed something to make him smile.
Thank you both for the kind words. See ya. JimE
👍
Go for it Ron. It will work. Add a piece of foil to the top and back side of the shell of the lamp holder, before paint to block the light. Running the wires as you said are prefect. Good luck. BTW, Nigel is one cool dude, been watching hm for a bit Cheers kiddo.
*"Add a piece of foil"* 👍
Hey Ron, great show tonight, Yes the light will look great, I'll see you tomorrow. 🍕🍕👍👍👌
See you tomorrow Dan! 👍
Hi Ron enjoyable watch yet again, how about trying the led on a scrap pice of plastic first to see what the effect looks like - Cheers Mike (Wellington)
👍
Good episode, Ron. Finally all caught up. Great work on the sub. The pizza looked yummy! 🍕😁 See you next episode!👍
Yes, I am really pleased with how the sub is turning out! Thank you, Brian, for going to the effort to catch up. Hope you enjoyed it. 👍
@roncalverley Yes, the sub is really looking good! Thank you, Ron, I really enjoy watching your videos... so, when I miss a few episodes, I definitely want to check them out so I know what's happening. Thanks again! 🙂 👍
Great episode Ron. Probably too late but Tara had the thought of leaving the plastic lense in place after you drill and just letting the light shine through. Take care n see you next episode.
Good thinking, Tara! But yes --- too late👍
Good morning Ron great show and a brilliant idea of yours re light. I say go for it lol. Pizza 🍕 looked yummy as per. Great to see max and missy Ron please tell me what that long black and yellow thing is every time you say max and missy you grab hold of it I keep asking myself what the hell is that thing. Anyway you take great care and catch you tomorrow regards Rod 🎉🎉🎉
Re: *"what that long black and yellow thing"* ruclips.net/video/9jl3xo6RrgQ/видео.html
@roncalverley arrrrrr! I see now thanks Ron im at piece now lol 😆
Good episode Ron, the white LED on the stern would look good! As always, Happy Pizza Day!🍕👍😁
Yes, I think you're right! 😊
Hi Ron, talking a little about the new build? Feels to me like you just started this one. Time really flies
It seems that way, doesn't it? I am really looking forward to this one.
Hi Ron yes a white light on the rear lol I actually looked it up and yes it’s white 😊😊😊, we’re expecting 42c this week, so not looking forward to it 😂😂😂don’t want to mention humidity! I know you don’t want to but it would look better if you painted the rear and left a window for what needs to be seen, but that’s just me 😊😊😊😊see you tomorrow
Yes, you're right about the white light. 😊
Hi Ron, your thought process for the stern light is great. On going forward, would it help to put a spot of paint on top & one side of the led, if concern is it glowing through the plastic?
👍
Ron...Here is an idea that might work. Could you paint with the air brush all the smaller parts still on the spru all at once. They would be easyer to hold and you could lean them up to dry Then remove them and clean them up. After that touch them up with a paint brush.
👍