If your inside looks different, you have the newer gen model. Check the video for that one here: ruclips.net/video/NrYY1JxJt_o/видео.htmlsi=GgL29xjmiBrjWpSy
I hope this isn't too late, but those little clips under the joysticks need to be unclipped to be able to pull the front and back plates apart. In fact, I usually separate one side, and then move straight to both clips. It should come apart easily after that.
Thank you so much for fast forwarding the video, it helped me see the whole process much easier and quite clearly. Great work. Might have just increased the speed so that we could understand even more. 👎🏿
Question. With newer controllers, you cant just pull the back off that easily. It appears there is another set of tabs in the L1/R1 housing area. Could you provide a video showing how to pull that off?
There is a new version of the controller where there are two hidden clips on the side of the seams on the controller near the R1/L1 bumpers. I can't get it open because those clips. Any updated instructions on how to remove those?
Question. My dualsense L2 doesn't work at all and the L2 is always pressed even when I don't press it. A friend of mine gave it to me and I don't know what the issue is
Question, which one is the mic cable that allows you to speak. I think I may have to get a new one. It doesn't work when I speak to the mic on the controller. I can hear sounds and all but I can't and unable to talk. I tried all the settings on the Ps5 menu, everything ti's fine. Thanks.m😊
great video...but you know that small ribbon that you said "dont forget this small ribbon" I see all the way its attacted to the front plate of the controller mine came off and dont know where to connect it ..
My controller is real but it doesn’t look like that when I take of the back the ribbon cables aren’t there on the sides and it’s covers in a black casing what does that mean?
All seems very solid to me, only thing is you seem a little rushed or maybe a bit rough with it. Or maybe im just overly ginger with the thing constantly afraid im gonna break something.
i am stock i cant remove the the cover at the top on both sides no matter what i followed every video and everyone seems to pull it apart like nothing and yes i have removed the srews
@@TheGamer2Know yes I know this. The video is sped up at the end. If u want to “slow it down” and skip back and forth it goes too far ahead or behind because of the video already being at double speed. I figured it out, but not after a bunch of expletives.
This is why you should always take pictures at different stages of disassembly no matter what it is you’re taking apart. Tutorials always forget to mention that part
Damn i shouldn’t had done this, now both my joystick are way off, people if you dont have the skill to do this please dont do it, you’ll make it even worse
If your inside looks different, you have the newer gen model. Check the video for that one here: ruclips.net/video/NrYY1JxJt_o/видео.htmlsi=GgL29xjmiBrjWpSy
You're a life saver, followed this guide to fix my controller and it works like day 1 again!
Bro how is y'all shell coming off so easy 😤
RIGHT!?!? I literally developed a fear of breaking the damn thing.
Man I stuck on this part cause I have no money to buy a new controller scared to break it.
anyone found the answer to that problem?, looks like some controllers have that issue in the big clip, i dont want to breake it
It's because those controllers have been opened before, still be careful though.
I hope this isn't too late, but those little clips under the joysticks need to be unclipped to be able to pull the front and back plates apart. In fact, I usually separate one side, and then move straight to both clips. It should come apart easily after that.
3:06 what does that do?
Mic
@@TheGamer2Knowwhat does the other one next to it do?
Very detailed and straight to the point. Got a like from me
Thank you! This video is FAR superior to the ifixit tear down.
Filming the entire reassembly then setting the speed to 5x. smart editing!
Thank you so much for fast forwarding the video, it helped me see the whole process much easier and quite clearly. Great work. Might have just increased the speed so that we could understand even more. 👎🏿
Question. With newer controllers, you cant just pull the back off that easily. It appears there is another set of tabs in the L1/R1 housing area. Could you provide a video showing how to pull that off?
There is two little tabs on top of the ps logo
They are like really tiny
Excellent question 👏
@lgs2054idk if I'm too late but there's two tiny screws underneath the L1 and r1 buttons. Just use a knife to take them off to reveal the screw
There is a new version of the controller where there are two hidden clips on the side of the seams on the controller near the R1/L1 bumpers. I can't get it open because those clips. Any updated instructions on how to remove those?
i just pulled really hard and it worked
Question. My dualsense L2 doesn't work at all and the L2 is always pressed even when I don't press it. A friend of mine gave it to me and I don't know what the issue is
Same crap for me but it’s my sons controller. Have it all opened up & I can’t even get to the L2
Great Sir ❤ you are genius 💯
Question, which one is the mic cable that allows you to speak. I think I may have to get a new one. It doesn't work when I speak to the mic on the controller. I can hear sounds and all but I can't and unable to talk. I tried all the settings on the Ps5 menu, everything ti's fine. Thanks.m😊
Thanks bro, this helpped me so much
Thanks bro, your video helped me a lot 🙏
do i need to take all the insides of the controller out to paint the shells?
Where is the bluetooth chip located?
great video...but you know that small ribbon that you said "dont forget this small ribbon" I see all the way its attacted to the front plate of the controller mine came off and dont know where to connect it ..
I accidentally tore the green wire right at solder on motherboard. What does it go to? And what do I need to do to solder it back on please?!
What about Like a L1 Or R1 Button not working, Pressing down on it no response, can that be repaired
My controller is real but it doesn’t look like that when I take of the back the ribbon cables aren’t there on the sides and it’s covers in a black casing what does that mean?
Thanks mate😃👍 amazing!!
I took out those 4 screws and lifted the little latches but my controller still isn't coming apart.. think you might have left something out
That middle part came of what should I do
Put it back
🔥 fire !!
I'm trying to install the besavior mod on my ps5 controller but all I'm getting is 3 blinking orange lights & goes off are you familiar with the fix ?
All seems very solid to me, only thing is you seem a little rushed or maybe a bit rough with it. Or maybe im just overly ginger with the thing constantly afraid im gonna break something.
You are right I should take it easy on those things. I’ve open so many I feel like they are indestructible
If u can’t put a ps5 controller togther part by part u don’t know rage issues until u have to repair your own ps5 and 4 controls at 8
I did everything and now my controller won’t turn on. It will light up yellow and then nothing happens
i am stock i cant remove the the cover at the top on both sides no matter what i followed every video and everyone seems to pull it apart like nothing and yes i have removed the srews
Ummmm why is my controller different??? Can't take the main board off, theres some things in the corners
prob different generation
ribbon cable snapped 😢
Anyone got problem with peeling off the white cover? I follow all steps but the behind part just not coming off😢
mine is completely different inside, 4 wires, thin connectors, plastic in one piece
You have the newer GEN the 030 or 040. I have a video on that one too: ruclips.net/video/NrYY1JxJt_o/видео.htmlsi=GgL29xjmiBrjWpSy
I accidentally ripped the black cable from the left stick off the motherboard. Luckily it still works.
I really appreciate you flying through the putting it back together part 👎🏻👎🏻
There's an option on RUclips where you customize the playback speed to .25x-2x
@@TheGamer2Know yes I know this. The video is sped up at the end. If u want to “slow it down” and skip back and forth it goes too far ahead or behind because of the video already being at double speed. I figured it out, but not after a bunch of expletives.
@@TheGamer2KnowCan you post a step by step guide to putting it back together? I don’t know where an orange ribbon cable goes
the right one
This is why you should always take pictures at different stages of disassembly no matter what it is you’re taking apart. Tutorials always forget to mention that part
😢😢😢😢 I just want to learn how to fix it not taking apart
IA ❤
Damn i shouldn’t had done this, now both my joystick are way off, people if you dont have the skill to do this please dont do it, you’ll make it even worse
Jesus died for us all! Have a wonderful day!
I tore my touchpad off
Jesus didn’t do a thing for me. If anything, he was the world’s first conman.
@@SlickRick87 why do you say that?
Quick question are the X O ∆ ⏹️ buttons the same mold no matter what gen it is?