TELEVES ELLIPSE MIX - Unboxing, Assembly and Installation
HTML-код
- Опубликовано: 21 ноя 2022
- Step-by-step unboxing, assembly, and installation of the Televes ELLIPSE MIX antenna (P/N 148883).
The Televes ELLIPSE MIX is a smart over the air outdoor antenna for medium to long-range receiving scenarios like towns and rural.
This state of the art antenna includes a best-in-class very low-noise T-Force preamplifier. In addition, real-time automatic gain control optimizes reception and ensures the optimal signal level is delivered at all times.
The ELLIPSE MIX is your best option for a compact high gain TV antenna with uncompromising performance.
INSTALLATION
🔸 Unboxing 👉0:09
🔸 Antenna pointing 👉 01:53
• Do you know where to point your antenna? 🎞️ Watch the following video to learn how to properly point your antenna • How To Locate Free OTA...
🔸 Antenna assembly 👉 1:59
1️⃣ Attach VHF reflector extension to main assembly 👉 2:13
Check the bolt is properly seated into the metal tubing
2️⃣ Insert UHF directors into main assembly 👉 3:09
Make sure you insert the open end into de the clamp
3️⃣ Insert UHF reflector into reflector self-locking clamp 👉 3:50
Make sure you insert the open end into de the clamp
4️⃣ Cable preparation and routing through the reflector 👉 4:11
The supplied twist-on coax connector and weather boot are convenience items for customers not equipped with the knowledge and tools to install professional self-sealing coax connectors that require a cable stripper and coax connector crimping tool for proper installation. Some customers may also choose to purchase long lengths of coax cable with connectors pre-installed.
Regardless of the choice make sure the connector is properly prepared and protected from moisture ingress.
5️⃣ Install dipole assembly 👉 5:13
Check that the dipole assembly is fully seated confirmed by checking that the plastic bayonet locks on each side are fully seated into the main antenna body
6️⃣ Insert UHF reflector into reflector self-locking clamp 👉 5:55
Make sure you insert the open end into de the clamp
7️⃣ Insert VHF reflectors into reflector self-locking clamp 👉 6:23
Make sure you insert the open end into de the clamp
8️⃣ Attach antenna to the mast 👉 6:46
Secure coax cable to the mast with weather resistant wire ties or electrical tape after the antenna has been adjusted
💡 EXTRA
• Power the antenna 👉 7:22
More information at:
🔗bit.ly/3VkVht4
🎞️ Watch the following video to learn how to connect the power supply • Power supply connection
• Scan channels on your TV 👉 7:30
🎞️ Watch the following video to learn how to scan the channels in your TV • How to scan channels o...
Subscribe to our channel: en.televes.com/youtube_subscri...
Follow us on our social networks:
Facebook: / televesofficial
Twitter: / televesofficial
Linkedin: / televes 
Наука
TlevesCorporation! thanks!fantastic vlog-farewell! 🖖
Great antenna. Just installed the same one
Made it very easy to put together
Good product
impressive well made antenna
Can this antenna be completely disassembled and re-boxed if I have to return it by following the steps in reverse order?
How does one properly ground this antenna to protect the expensive pre-amp ?
It is a pity that for the antenna it is not possible to mount a dipole and reflectors for the VHF band in a vertical polarization. Unfortunately not everywhere the TV signal for VHF is broadcasted with horizontal polarization (like where I live).
The antenna can be installed in both positions, horizontal/vertical, all you have to do is change the position of the antenna anchor to the mast.(extract, rotate 90 degrees, insert and fix).
@@TelevesCorporation I know, but that's not the case. I mean it is impossible to receive signal from UHF in horizontal, with VHF in vertical at the same time. This is doable in your other antennas like Yagi Edge Mix for example, but I don't see such option here for Ellipse Mix.
It costs $150 somewhere in Poland, which is very expensive.
Ja kupuje Jagę tamize za 40 pln. Wkładam do środka wznacniacz hfo lna 188 5g i wiem że na 60km no tyle mam do nadajników wszystko mi będzie działać.
@@WhiskeyJones Did you buy this particular antenna bro?
@@WhiskeyJones Drop me a link to the site where you bought the antenna, thanks
@@beche1838 LNA188-5G +30dB Wzmacniacz antenowy DVB-T2
@@beche1838 Kup zwykłą antenę typu YAGA. 16 elementów i wsadź do środka LNA188-5G od Firmy HFO. Wpisz w google. Ja kupuje antenę firmy Tamiza i HFO to są polskie firmy.
🏛️🏆🇪🇦👑🎄⛪☃️🎅🌌🌠🛸👽
anyone uses this antenna will be happ if you use the filter im showing off
nyc connecticut market depending on network
48 to 60 + % verry happy 60 miles away from nyc bridgeport ct
GROWORD-5G LTE Filter for TV Antenna Signal Purifier-Improve Digital HDTV Antenna and Amplifier Signals-4G/5G Filter Reduce Interference from Cell Phone Towers &Transmitters LPF12L-698M 5G Filter