Mine is actually a 299 from an olympic and it is pretty tight with no decompressor - you just gotta put your back into it! if your starter is in good condition it will engage very quickly - but yes you have to wait until it engages a little in order to pull. when i keep pulling it is actually easier because the motor is still turning when i pull it.
Holy smokes! It's a major flashback for me from when I was running with the pack on my Ski-Doo Elan. It's sound alone was great to hear again. Great video and thank you for sharing : )
Good sled and handles the pow well. Last year my brother snapped the metal ski on my vintage cat, but I didn't really pitch too much into fixing. But I got so desperate to ride vintage so I fixed the ski and the thing is cleated right, so when I drove it out of the shop you should of seen the crud on the snow it was crazy
Hey Ishobie 1-what you do to the carburetor for summer? Because I always have to rebuild the carb of mine every winter. 2- what oil mix u put in it because my owner's manual write 20/1 but I have problems with the spark plugs and head carbonisation.
Always use a "Bosch" spark plug in a single Elan.225,240,or a 260 at the very hottest.A 280 or a 300 and it will run like crap...!!! (i recommend a 240)...!!!
Hey powermodz. I bought my first arctic cat today. Its a 2005 f5, it seems to take a lot of pulls to get it started. Idk if it could be old gas or what but any ideas on what it is or how to fix it?
Congrats, the EFI version should start in 2-5 pulls (normally about 3). The carb might take a bit more tinkering (get used to how it likes to start) or few more pulls but should be close you'll just have to keep her running while it warms up. How my pulls is a lot, over 20? I'd drop a post over on arctic chat with more details in the firecat forums. They should help you in a more suited format that RUclips. Yes though siphon out all the gas, put in fresh fuel and drop in new plugs would be the starting point. If there is a inline fuel filter also replace that also (think just on the carb, the smart valves also filter on the EFI and can collapse on themselves in time. Start with the basics and hope don't have to go much further.
Aspired329 thank you. We drained the gas out. Put fresh gas in. We did not change the plugs. Today its 26 degrees out and im having trouble getting a full pull out of the pull start.
I have a video of mine I'd like you to check out. It's called 1978 Élan 250 problem help. You were the first that came to mind when I was going to look for advice. Love your videos.
First, these skidoos don't like regular gas, especially the ones from the 70's. Use 90 octane or more. Second, check your spark plugs. If the engine starts but you feel like you have to push it to make it actually travel, then chances are you are running on one cylinder. An easy way to check this is to lift the hood and examine the manifold/muffler system, If one of the "exhaust tubes" coming out of a piston chamber is wet with gas (as opposed to dry with exhaust) then you have a lazy spark plug. Take it out, clean it off with brake parts cleaner or varsol and dry it, and either replace it or (if you are cheap like me and a long way from a parts store) try putting the cleaned plug back in and see what happens.
Love the fact that there are two extreme mod sleds there and your geting the ol elan runnin
that's really cool how the little guys where getting so excited. Awesome videos!
Great to see the young ones getting into the sport and enjoying the winter weather!! Happy Holidays!!
Fun video, nothing like a good cold start. Merry Christmas!
Elans are like honda 3 wheelers, ya just cant kill them
awesome good to see you are getting the young uns started at an early age.
Mine is actually a 299 from an olympic and it is pretty tight with no decompressor - you just gotta put your back into it!
if your starter is in good condition it will engage very quickly - but yes you have to wait until it engages a little in order to pull. when i keep pulling it is actually easier because the motor is still turning when i pull it.
Hahaha that's really cool how the little guys where getting so excited. Awesome videos!
Holy smokes!
It's a major flashback for me from when I was running with the pack on my Ski-Doo Elan.
It's sound alone was great to hear again.
Great video and thank you for sharing : )
Watching you pull it over at the start I said out loud about memories
LOL
Your a good dad...keep it up
Thanks!
That reminded me when we were kids. Good on you man. Thats good fun for the kids
They honestly should bring back the elan. How fun they are. I have a 250 single and a twin SS. They're great!!!
sounds awesome!
i had a 1973 moto ski and it was sitting for about 10 to 15 years and started third pull after priming it
We got lucky!! Ottawa ontario
PowerModz
How do you keep the hood on???
@@andersenmccomb6287 b
where do you live where you get 20" or snow in the first snowfall??
kyle woods obvi you never been to the ottawa valley
It's an Ontario thing
I remember it all, pulling, the smell the sound of bogging
Perfect for the kids. Nice vid.
i always use premium gas and use 40:1, 20:1 is for oldschool 2 stroke oil from he 70's, this stuff we use today is alot better:)
I used to have a 1969 Olympic 335...started every year!!!!
That sled is adorable.
You sir, are awesome.
Good sled and handles the pow well. Last year my brother snapped the metal ski on my vintage cat, but I didn't really pitch too much into fixing. But I got so desperate to ride vintage so I fixed the ski and the thing is cleated right, so when I drove it out of the shop you should of seen the crud on the snow it was crazy
Hey Ishobie
1-what you do to the carburetor for summer? Because I always have to rebuild the carb of mine every winter.
2- what oil mix u put in it because my owner's manual write 20/1 but I have problems with the spark plugs and head carbonisation.
Gotta love the Elans.
Did you mean replace the coils going to the spark plugs or the coils on the stator plate?
We have Sea-doos down here in Florida.
Paradise!
My 250 polaris took 4 pulls after sitting for 7 months
can't get them off it!
I had one Elan ss good seld . .
You need to build a custom sled for your kids
Always use a "Bosch" spark plug in a single Elan.225,240,or a 260 at the very hottest.A 280 or a 300 and it will run like crap...!!! (i recommend a 240)...!!!
Lern to let it warm up
Agreed
that is awesome hehe
Hey powermodz. I bought my first arctic cat today. Its a 2005 f5, it seems to take a lot of pulls to get it started. Idk if it could be old gas or what but any ideas on what it is or how to fix it?
Congrats, the EFI version should start in 2-5 pulls (normally about 3). The carb might take a bit more tinkering (get used to how it likes to start) or few more pulls but should be close you'll just have to keep her running while it warms up. How my pulls is a lot, over 20? I'd drop a post over on arctic chat with more details in the firecat forums. They should help you in a more suited format that RUclips. Yes though siphon out all the gas, put in fresh fuel and drop in new plugs would be the starting point. If there is a inline fuel filter also replace that also (think just on the carb, the smart valves also filter on the EFI and can collapse on themselves in time. Start with the basics and hope don't have to go much further.
Aspired329 thank you. We drained the gas out. Put fresh gas in. We did not change the plugs. Today its 26 degrees out and im having trouble getting a full pull out of the pull start.
they get the 540 elan:)
lol @ Sledhed Ed, I used to love those skits.
I have a video of mine I'd like you to check out. It's called 1978 Élan 250 problem help. You were the first that came to mind when I was going to look for advice. Love your videos.
I have a 1994 arctic cat ext 580
how old are they? i started when i was 2.
try not to brake the vintage!!!!
That's crazy I park my atvw
my élan has lost power, I don't know why any answers
First, these skidoos don't like regular gas, especially the ones from the 70's. Use 90 octane or more. Second, check your spark plugs. If the engine starts but you feel like you have to push it to make it actually travel, then chances are you are running on one cylinder. An easy way to check this is to lift the hood and examine the manifold/muffler system, If one of the "exhaust tubes" coming out of a piston chamber is wet with gas (as opposed to dry with exhaust) then you have a lazy spark plug. Take it out, clean it off with brake parts cleaner or varsol and dry it, and either replace it or (if you are cheap like me and a long way from a parts store) try putting the cleaned plug back in and see what happens.
I park my ATV in my garage and a year later it is completely ruined
Dont make them like they use to...lol
LUCKIEST KIDS EVER
LMAO