hi, I'm wondering if u did it on ur own personal phone or if it was just for others. I'm facing the same issue. so just in case this will happens more often, I should'd be surprised again.
@@rezzytheblackrose9212 i replaced the back glass because it was easier than trying to reapply adhesive...you can reuse the glass if you want. As for the charging port just follow along with the video. If you buy the glass it comes with tools as well....just buy a 15.00 heat gun at a home jmprovement store.
FIXED! It worked! Thank you for the tutorial! This fix worked exactly as advertised and saved me from buying a new phone. Normally I would have gladly taken an excuse to upgrade, but quite frankly no pandemic-era phone touches this device (when the USB port works) when it comes to features I value. I looked and looked and even for double the price a "new" device would have been a downgrade. Hopefully this fix will allow me to keep this device a few more years... long enough for manufacturers to stop this downward spiral.
Hello friend just look for good charging cable and charger and everything will be fine but this is hard because nowadays everything is rubbish , hope that helps you in future
Great 2-part video on this. My wife's v60 port died, so I got a replacement part and followed this. The only problem I had, and not the fault to you, was the replacement part I got did not have the attached board. Part of the charging ribbon is taped on the board. Almost looks like it's part of the board. Anyhoo, I was able to heat that up, remove and reuse the board, and tested it all out and it worked. Thank you for your videos. Very very helpful!
Thanks for making this detailed video. I know it is much harder doing a task like this while recording at the same time. I have experience opening and working on phones but thanks to your video I won't risk ruining my beloved v60 while the wireless charging is still working.
Thank you man! I unscrewed one screw which you did not mention about, it seemed to be almost at the very end of the disassembly, before the removal of charging board. And I forgot to screw it back. But it's okay. Everything works fine without it.
Thank you for posting an amazingly informative video. 2 vehicles have stereos that utilize wired Android Auto. Constantly having to toy with the USB connector to restore communications. How long did it take you from start to finish. I think I will order the part then see what a cell phone repair shop will charge for labor to do the replacement with my providing the part . If you say it took 1 or 2 hours yet the professional says they expect to charge me 3 to 4 hours, will know they are trying to take me to the cleaners... Again thanks for your efforts to make this video 👍
I took it apart, but had to wait until next day for the parts. Technically not more than an hour. Ended up having to use glue for back panel, double sided tape didn't work. Also got official backplate adhesive but that didn't hold up either for some reason. It's as good as new now.
Besides the high pitch fast speech in first vid. Nice and well done. Thanks, because I have same issue ,but i also use the phone to transfer data and sometime wont let me..
Water resistants is always compromised when tearing open unless it's done by a professional. As long as the back is fully glued or adhered then it should be fine.
I have a problem with my LG v60 T-mobile where it is not charging and when it is connected it keeps restarting as if the battery has no charge and it doesn't turn on anymore, could this be solved just by changing the charging connector or will I have to change the battery as well?
@@SicErikTech i think can you check for me the original one you remove on your lg v60. Also pls check it is easy to remove the board from the charging port? Ty
I'm poor and I dont have a credit card and can't purchase anything online. Plus I enjoy the process of learning electronic repair. With no budget, the first thing I try to do, is to see if I can repair it or modify it! if all else fails. I've saved hundreds on electrical repairs of the window control switches for my dgc when they've stopped working because the contacts were dirty. A bit of disassembly work. Cleaned the contacts reassembled and works like new! So could i try to "reball" the solder or crimp the connector casing, or something low cost, and where should I pry it to accomplish that? All i own is a 35 whatt soldering iron and a butane torch iron. I'm a video learner and text can confuse me, so if you have a video it would help me out! greatly appreciated! Lg V60 thinQ TMobile version
I replaced the charging port but still sometimes it doesn't work like it should it's charging but not fast charging and some of the cables don't work at all but on LG G5 they work and so I am looking for solution thanks in advance guys
this ribbon seems excessively long. do you suggest folding before I installed it? Mine didn't come with the chip connected and I had to reconnect to the old one. ............actually never mind. lol I just forced it in and held down while I put a screw in then reconnected the bottom after putting the battery back in. it kept pushing up out of one side at a time, either the motherboard or the bottom connectors.. if it happens again I'll order the one you got instead. thanks for the vid
Just a note. The ribbon cable that attaches to the back of the motherboard should have a tab that embeds itself on the chassis of the phone so you can just place the motherboard over it. I tried the method to install in the video and it was causing issues with the motherboard not sitting flush so my power button wasnt working till i figured it out.
Do you have a problems that lg v60 is so long at charging can take up to 3-4 hours? And when it check accubattery the mA is around 500-800 mA and when it connect to second monitor it turn and of as if it can't provide full power ? Have you this problem? I found in Reddit and internet some people have this problem is this the port?I scared this us motherboards problem
And remember remove the headphone jack first before you trying to tear apart the cable and the little board because you are going to rip the jack cable and have to be replaced hope that helped you with your device
Hello, does trying to resolder the usb port in its place beneficial ? *Where i live there is no spare parts for lg, i must order it from abroad, so, do you think this attempt worth it ? Isn't the most probable reason that the wiggle desolder the port pins ?
@@SicErikTech When i wiggle the cable inside the port while the phone is stationary, it still work with no stutter, if i mover the phone itself while keeping the cable in place it start stuttering, that's why i assumed that the problem is the soldering of the port on that small chip connected to the flex. Thanks for your help.
@@SicErikTech I also noticed that the cables with all pins inside tends to work better (and if stuttered won't disconnect completely, only starts normal charging instead of fast charging), the cables with specific pins only may not work, work only one side or stutter
I bought the USB without the motherboard portion and now my calls stopped working. I'm going to assume the antenna is not properly connected but I'm returning the phone completely. If my next LG V60 ThinQ fails then I'm getting a new brand completely.
A very good video...Thanks Much 𝙎𝙄𝘾𝙀𝙍𝙄𝙆 𝙏𝙀𝘾𝙃. My bottom firing speak does not work now, Ive checked my settings and sound profile and cleaned the contacts but it still doesnt work. I may have kept the heat on the bottom edge with the hair blower too long while trying to loosen the case adhesive.....Do you think I damaged the speaker in this way?
Heat wouldn't have affected it too much, unless it was some serious heat gun. I would make sure the bottom part snaps in all the way, and tighten it well. I believe they are on contact pins, not connections.
It will fix anything related to plugging anything into USB port. Charging, external mic, dual screen case etc. Although, the dual screen may be the culprit to this problem.
My V60 sometimes recognizes the type c charger but never actually charges, so I have to charge it wirelessly. Therefore I assume it's a problem with the port. Is this normally the problem?
When I plug in the charger, the phone doesn't recognize it. When I restart the phone, then it says charging, but it doesn't actually charge. When I wiggle the cable around, it stays connected but if I remove the charger and plug it in again, the phone will no longer sense it. I thought it was the battery but it charges fine wirelessly
I changed the flex cable and after 11 months it stopped working. Did this happen to you?? Also, all I need to heat up the phone tro remove the battery is a simple hair dryer?
@@SicErikTech is there a specific flex cable you'll recommend? I see some on Ebay and Amazon, but I don't know which I should buy. The last one I bought said OEM but only lasted 11 months.
I bought a brand new LG V60 and after about 3 months of use the phone is not turning on and doesn't charge. It doesn't even charge with a wireless charger. Sometimes when I try to charge it with a USB-C charger, the phone turns on for a brief moment and has a message that says the phone needs to be charged for more longer and then it turns off. Do you have any ideas on how to fix this issue?
How long does it take to have a loose pot charger like this? If it's the original unit I would like to know the approximate time Is there a long-term solution? For example, can I change only the port of another model instead?
@@SicErikTech If it's original Will it be this symptom? In the case of normal use, no ds, approximate lifespan How long does it take to have this problem?
HELP!, ive redone this 3 times and while the charging port works the bottem speaker dosent, ive bought a new part for everything that could be the problem but still nothing, and help would be appreciated
This happened to me recently, luckily I had and extra ribbon. You have to be careful when prying up lego connection for fingerprint sensor. You can easily break little diodes on top of+- speaker connection. Pop off fingerprint sensor from the bottom
My wife's phone is the LG V60 Thin Q. I used your video to change the battery. Why? Because the battery blew up like a pillow and blew the back right of the phone! I had the stuff to change out the battery. But why did it happen? Will it happen to the new battery?
@@josephtate4680 batteries get old and that can happen. The new battery will probably last another 4 year. I should have changed my battery, just to be safe
I am through the disassembly part, but before moving on, I need help! I lost one of the screws & can't find them anywhere online, except for 600+ piece kits. Would someone please tell me where to order a couple of these screws, or at least the screw's specs?
You can probably get by with removing a screw from a spot that snaps in pretty good. Like the one off to the side of the battery. The ones up top need to keep contacts down
After watching this twice I wish you had taken some needle nose pliers and crimped the original port a little bit. That might have solved the issue. I think the ports get stretched out/loose when using the dual screen, because you have to bend the port to take the phone in and out of the case. Crimping it a little seems like a proper fix to tighten up the port once again For all you know the used one you bought to replace it was also loose and the seller just crimped it and resold it Also how is the new repair holding up after 6 months? Do you use the dual screen at all?
@@G00G00L yes but didn't need to spend the extra $30. I noticed when I bend my charging cable in one direction it starts to work again, so it's that damn dual screen that stretched it out in the first place
@@kenmastersmaster yeah it's annoying. I didn't even use the dual screen and it's worn out. For now I could solve it by cleaning it with a toothpick and then use a cable which seems to fit a bit tighter.
i agree and its because of how the dual screen and phone were designed to come together. Some engineer was asleep at the switch and didn't think that through. smh
Just curious whether the charging port you bought had an audio board or not? That's the choice I have getting one of these on Ebay. Also, what carrier is your phone on?
Maybe charging port is bad, maybe try charging wirelessly see if it turns on. Or maybe try holding down the power button and volume down button until it responds. Kinda hard to say.
friend of mine v60 the fingerprint sensor unlocks with any finger even without being registered how to solve this problem? I already changed the sensor and it stayed the same, it didn't work
@@SicErikTech thank you for the reply. I found pre-cut adhesive for this phone on ebay (shipped from China). I will also buy this glue you mentioned above just in case I need it.
There are plenty on eBay for like $4 or $5 & shipped from the USA too. Stay away from China shipping if you don't want to wait a month to receive the item.
So i did this, my phone was working good prior to the replacement, only issue i had was i had to turn my speaker on and talk through the mic or else the mic wouldnt work over the earpiece. I went ahead order this part the whole flexcable charging port, mic unit... replaced it. (ive been replacing stuff on andriods and iphones for personal use past 10 years) and for some reason after i put everything together, the phone only vibrates, doesn't give me any display. I have tried the method of hard restarting it, volume up and power as well... all it does is vibrate in different patterns. i think the phone turns on but doesnt give me display at all. i opened up the phone like 3 times now to address this issue to see if anything is loose but nothing is loose. everything is good. ive checked it like 3 times now over and over doesnt work. even tried throwing the phone in the freezer, same result, only vibrates... any idea what could be going on with it? LG V60 ThinQ
@@evtpr3dat0rx62 yikes, looking to repair myself, don't really want to cough up the $200+ to get it repaired, but I guess there's no problem -free solution here
@@YbarraProductions im not sure if it has to do with the part that i installed maybe a counterfiet one, i might give it a shot by putting back the old one since the phone was fully functional except the mic... that being said, i can only do it if i find the old part lmao
I just want to make some update on my comment I bought cable but it's not arrived yet and I have suggestions like get silicone seal to keep dust and debris out and buy good charging cable and charger
I started to wirelessly charge. Not a big deal. I've noticed if you press down hard on the charging cable against the port it starts to take a charge, so I'm guessing the inside of the port is a little warped or something Of 4 LG v60 I bought used, 2 have bad ports. That's just terrible for a 1.5 year old phone. No point spending money to fix them, since you can buy them used for $100 these days.
Hello guys I replaced the cable with new old one and everything is ok it changes with every cable that I connect now I can replace the charging port on my old cable and see is the port or something on the cable itself
Ive done this 3 times...for 15.00 you get a new back glass with camera lenses and adhesive pre applied...makes it super easy
hi, I'm wondering if u did it on ur own personal phone or if it was just for others.
I'm facing the same issue. so just in case this will happens more often, I should'd be surprised again.
@@rezzytheblackrose9212 did it on my own phone a couple times..just take your time its not hard at all
@@rezzytheblackrose9212 i replaced the back glass because it was easier than trying to reapply adhesive...you can reuse the glass if you want. As for the charging port just follow along with the video. If you buy the glass it comes with tools as well....just buy a 15.00 heat gun at a home jmprovement store.
Replaced with your guide and it is working very good. My data is finally working now.
Glad I could help 😃
FIXED! It worked! Thank you for the tutorial! This fix worked exactly as advertised and saved me from buying a new phone.
Normally I would have gladly taken an excuse to upgrade, but quite frankly no pandemic-era phone touches this device (when the USB port works) when it comes to features I value. I looked and looked and even for double the price a "new" device would have been a downgrade. Hopefully this fix will allow me to keep this device a few more years... long enough for manufacturers to stop this downward spiral.
Well done, I'm glad I was able to help. Didn't know if I did a good tutorial or not lol. The V60 is well worth the work.
Hello friend just look for good charging cable and charger and everything will be fine but this is hard because nowadays everything is rubbish , hope that helps you in future
is it still working?
I just replaced the type C connector and it worked, so no need to buy flexible parts.. in fact it saved a lot of money 😊
hello man, i need help, its glued hard to the flex cable, how did u replace it?
Yes
How'd you do that thing? I was thinking of the same
Great 2-part video on this. My wife's v60 port died, so I got a replacement part and followed this. The only problem I had, and not the fault to you, was the replacement part I got did not have the attached board. Part of the charging ribbon is taped on the board. Almost looks like it's part of the board. Anyhoo, I was able to heat that up, remove and reuse the board, and tested it all out and it worked. Thank you for your videos. Very very helpful!
Glad I could help ☺️ love your little Profile pic BTW Metallica!
@@SicErikTech I've had this as my pic for years, and tbh you are the first to mention it. LOL Glad to know you are a fellow Metallica fan!
Thanks a lot man. You just helped a fella out, I was getting tired of using a wireless charger to charge this thing!
I just love watching videos of this device. I desperately want and need one
Thanks for making this detailed video. I know it is much harder doing a task like this while recording at the same time. I have experience opening and working on phones but thanks to your video I won't risk ruining my beloved v60 while the wireless charging is still working.
Yeah, it's a nightmare doing it while recording lol. Glad I could help you 😃
Thank you man! I unscrewed one screw which you did not mention about, it seemed to be almost at the very end of the disassembly, before the removal of charging board. And I forgot to screw it back. But it's okay. Everything works fine without it.
Thank you, mate. That's the kinda content that just keeps giving.
@@HekaWaset glad I can help
Great Video, followed along , and all fixed now. Appreciate it.
@@markdexter0107 you're very welcome 😁
Thank you for posting an amazingly informative video. 2 vehicles have stereos that utilize wired Android Auto. Constantly having to toy with the USB connector to restore communications. How long did it take you from start to finish. I think I will order the part then see what a cell phone repair shop will charge for labor to do the replacement with my providing the part . If you say it took 1 or 2 hours yet the professional says they expect to charge me 3 to 4 hours, will know they are trying to take me to the cleaners... Again thanks for your efforts to make this video 👍
I took it apart, but had to wait until next day for the parts. Technically not more than an hour. Ended up having to use glue for back panel, double sided tape didn't work. Also got official backplate adhesive but that didn't hold up either for some reason. It's as good as new now.
Besides the high pitch fast speech in first vid. Nice and well done. Thanks, because I have same issue ,but i also use the phone to transfer data and sometime wont let me..
Ask, my lg v60 can fast charge, can use external monitor, but cannot use dualscreen case, where is the problem ?
Hello ! Is the water resistance still intact? Does it pass the Water Resistance Tester test? Thanks for the educational video.
Water resistants is always compromised when tearing open unless it's done by a professional. As long as the back is fully glued or adhered then it should be fine.
@@SicErikTech Ok, I understand you. I’m just wondering if this program will show that everything is fine :)
I have a problem with my LG v60 T-mobile where it is not charging and when it is connected it keeps restarting as if the battery has no charge and it doesn't turn on anymore, could this be solved just by changing the charging connector or will I have to change the battery as well?
Try charging with a wireless charger, if it comes on and hold a charge then it is the USB charging port
Thanks for this! I accidentally tore the antenna cable when removing the charging port but luckily found that piece for pretty cheap on eBay
Hello may I know if the charging port board is ditchable? Because I saw many seller only selling charging port only without the board ..
That I am not sure of, it seems to be attached to the board
Ty
@@SicErikTech i think can you check for me the original one you remove on your lg v60. Also pls check it is easy to remove the board from the charging port? Ty
I'm poor and I dont have a credit card and can't purchase anything online. Plus I enjoy the process of learning electronic repair. With no budget, the first thing I try to do, is to see if I can repair it or modify it! if all else fails. I've saved hundreds on electrical repairs of the window control switches for my dgc when they've stopped working because the contacts were dirty. A bit of disassembly work. Cleaned the contacts reassembled and works like new! So could i try to "reball" the solder or crimp the connector casing, or something low cost, and where should I pry it to accomplish that? All i own is a 35 whatt soldering iron and a butane torch iron. I'm a video learner and text can confuse me, so if you have a video it would help me out! greatly appreciated! Lg V60 thinQ TMobile version
Hi. On lg v60 MainBoard is ipx4 connector. Any idea what is doing is it wifi or gsm signal conn.?. Tnks
i think just new charging port ,,,all screw drivers and some adhesive are the components which we need right>?
Exactly
Exelent guide. Tnks. Already I have changed usb port and battery.
I replaced the charging port but still sometimes it doesn't work like it should it's charging but not fast charging and some of the cables don't work at all but on LG G5 they work and so I am looking for solution thanks in advance guys
this ribbon seems excessively long. do you suggest folding before I installed it? Mine didn't come with the chip connected and I had to reconnect to the old one. ............actually never mind. lol I just forced it in and held down while I put a screw in then reconnected the bottom after putting the battery back in. it kept pushing up out of one side at a time, either the motherboard or the bottom connectors.. if it happens again I'll order the one you got instead. thanks for the vid
Just a note. The ribbon cable that attaches to the back of the motherboard should have a tab that embeds itself on the chassis of the phone so you can just place the motherboard over it. I tried the method to install in the video and it was causing issues with the motherboard not sitting flush so my power button wasnt working till i figured it out.
Thanks!
Thank you 👍
If we replace only usb type c jack not full strip......
Mobile will charge or Not????
Do you have a problems that lg v60 is so long at charging can take up to 3-4 hours? And when it check accubattery the mA is around 500-800 mA and when it connect to second monitor it turn and of as if it can't provide full power ? Have you this problem? I found in Reddit and internet some people have this problem is this the port?I scared this us motherboards problem
And remember remove the headphone jack first before you trying to tear apart the cable and the little board because you are going to rip the jack cable and have to be replaced hope that helped you with your device
Whoops.. i probably broke my jack then.
Hello, does trying to resolder the usb port in its place beneficial ?
*Where i live there is no spare parts for lg, i must order it from abroad, so, do you think this attempt worth it ?
Isn't the most probable reason that the wiggle desolder the port pins ?
No, try pinching the USB C port gently see if that helps. I believe it gets loose after a while
@@SicErikTech When i wiggle the cable inside the port while the phone is stationary, it still work with no stutter, if i mover the phone itself while keeping the cable in place it start stuttering, that's why i assumed that the problem is the soldering of the port on that small chip connected to the flex.
Thanks for your help.
@@SicErikTech I also noticed that the cables with all pins inside tends to work better (and if stuttered won't disconnect completely, only starts normal charging instead of fast charging), the cables with specific pins only may not work, work only one side or stutter
Why did you replace the ribbon aswell?
Apparently it's all one piece, unless you want to do some soldering
I bought the USB without the motherboard portion and now my calls stopped working. I'm going to assume the antenna is not properly connected but I'm returning the phone completely. If my next LG V60 ThinQ fails then I'm getting a new brand completely.
How did u heat treat it to loosing the adhesive
Blow dryer, and for some dumb reason the back was already coming up when I got the device
Instead of returning it, I fixed it and was as good as new
Hello guys where did you bought flex cable from
A very good video...Thanks Much 𝙎𝙄𝘾𝙀𝙍𝙄𝙆 𝙏𝙀𝘾𝙃.
My bottom firing speak does not work now, Ive checked my settings and sound profile and cleaned the contacts but it still doesnt work.
I may have kept the heat on the bottom edge with the hair blower too long while trying to loosen the case adhesive.....Do you think I damaged the speaker in this way?
Heat wouldn't have affected it too much, unless it was some serious heat gun. I would make sure the bottom part snaps in all the way, and tighten it well. I believe they are on contact pins, not connections.
Will this also fix the connection to Android Auto?
It will fix anything related to plugging anything into USB port. Charging, external mic, dual screen case etc. Although, the dual screen may be the culprit to this problem.
Got it... Thanks for the quick reply!
My V60 sometimes recognizes the type c charger but never actually charges, so I have to charge it wirelessly. Therefore I assume it's a problem with the port.
Is this normally the problem?
Yes, if you wiggle it and it charges and then stops is the problem
When I plug in the charger, the phone doesn't recognize it. When I restart the phone, then it says charging, but it doesn't actually charge.
When I wiggle the cable around, it stays connected but if I remove the charger and plug it in again, the phone will no longer sense it.
I thought it was the battery but it charges fine wirelessly
I changed the flex cable and after 11 months it stopped working. Did this happen to you??
Also, all I need to heat up the phone tro remove the battery is a simple hair dryer?
@iseerashonal821 it's still going strong on my device. Yes, hair dryer and razor to cut adhesive
@@SicErikTech is there a specific flex cable you'll recommend? I see some on Ebay and Amazon, but I don't know which I should buy.
The last one I bought said OEM but only lasted 11 months.
I bought a brand new LG V60 and after about 3 months of use the phone is not turning on and doesn't charge. It doesn't even charge with a wireless charger.
Sometimes when I try to charge it with a USB-C charger, the phone turns on for a brief moment and has a message that says the phone needs to be charged for more longer and then it turns off.
Do you have any ideas on how to fix this issue?
You probably have a bad battery
How long does it take to have a loose pot charger like this? If it's the original unit I would like to know the approximate time Is there a long-term solution? For example, can I change only the port of another model instead?
If you're not using the dual screen you should be ok, that's the theory anyway
@@SicErikTech If it's original Will it be this symptom? In the case of normal use, no ds, approximate lifespan How long does it take to have this problem?
HELP!, ive redone this 3 times and while the charging port works the bottem speaker dosent, ive bought a new part for everything that could be the problem but still nothing, and help would be appreciated
This happened to me recently, luckily I had and extra ribbon. You have to be careful when prying up lego connection for fingerprint sensor. You can easily break little diodes on top of+- speaker connection. Pop off fingerprint sensor from the bottom
I'm having issues with my charging port too one minute my charges then it doesn't I'm think about taking it to a repair shop
My wife's phone is the LG V60 Thin Q. I used your video to change the battery. Why? Because the battery blew up like a pillow and blew the back right of the phone! I had the stuff to change out the battery. But why did it happen? Will it happen to the new battery?
@@josephtate4680 batteries get old and that can happen. The new battery will probably last another 4 year. I should have changed my battery, just to be safe
@@SicErikTech thanks
I am through the disassembly part, but before moving on, I need help! I lost one of the screws & can't find them anywhere online, except for 600+ piece kits. Would someone please tell me where to order a couple of these screws, or at least the screw's specs?
You can probably get by with removing a screw from a spot that snaps in pretty good. Like the one off to the side of the battery. The ones up top need to keep contacts down
@@SicErikTech That's exactly what I did, but before committing to permanently closing the back, I'd like to have all the screws in...
You have any dead lg phone lying around?...open it and take the screw from the dead lg phone...
After watching this twice I wish you had taken some needle nose pliers and crimped the original port a little bit. That might have solved the issue. I think the ports get stretched out/loose when using the dual screen, because you have to bend the port to take the phone in and out of the case. Crimping it a little seems like a proper fix to tighten up the port once again
For all you know the used one you bought to replace it was also loose and the seller just crimped it and resold it
Also how is the new repair holding up after 6 months? Do you use the dual screen at all?
thanks for the tip, thats what i suspected. unfortunataly I still need to tear down the device in order to crimp the port...
@@G00G00L yes but didn't need to spend the extra $30. I noticed when I bend my charging cable in one direction it starts to work again, so it's that damn dual screen that stretched it out in the first place
@@kenmastersmaster yeah it's annoying. I didn't even use the dual screen and it's worn out. For now I could solve it by cleaning it with a toothpick and then use a cable which seems to fit a bit tighter.
i agree and its because of how the dual screen and phone were designed to come together. Some engineer was asleep at the switch and didn't think that through. smh
Tried crimping the port on my second V60, it didn't work. Might actually be an issue with the connection board.
hi, after I replace the port and put back everything, the screen won't respond to my touch, would you have any insight as to why?
Disconnect the panel and reconnect, usually works. Make sure everything works before sealing the back on
Just curious whether the charging port you bought had an audio board or not? That's the choice I have getting one of these on Ebay.
Also, what carrier is your phone on?
Yes, it all came together. I believe it's the bottom speaker board
I brought a replacement but its jus the port not the ribbon do you think that will work?
You need the ribbon attached. The port alone is meant to be a solder job I think
@@SicErikTech thanks man amazon sold bamboozled me lol. That my fault for being cheap tho
@@SicErikTech i appreciate bro keep up the good work u will grow
@@zhybw1ld I think there's a Link to eBay on there
My LG V60 suddenly turns off while charging and get hot. can't turn on anymore. Can i get some advice what to do? Thank you
Maybe charging port is bad, maybe try charging wirelessly see if it turns on. Or maybe try holding down the power button and volume down button until it responds. Kinda hard to say.
I've tried the button combination but no respond.
Or it can be trouble of IC power ? 🙏
hey bud i changed everything but now my phone says its on airplane mode
any ideas what i did wrong?
Did you connect the black antenna wire?
@@SicErikTech The one with top and bottom connections?
i did have an issue with the left side small ribbon connection
right above the battery can that be it?
@@3232buddah if something doesn't work it's always a good idea to check and reconnect all ribbons and cables
friend of mine v60 the fingerprint sensor unlocks with any finger even without being registered how to solve this problem? I already changed the sensor and it stayed the same, it didn't work
Is Smart Lock by any chance turned on? If set to any Bluetooth device, it will keep unlocked
Does USB data transfer works ?
Yes, before it wouldn't
@@SicErikTech thx mate
Love 💕
How did the Double sided tape replacing go? Was is super tedious? How long did it take?
Not well lol. Ended up using E6000 Glue. Works like a charm
did you try cleaning the port with contact cleaner or 91% alcohol with paper before doing this? Just curios
Yes, it's more to it.
where to get the double sided adhesive for this phone?
Ended up using E6000 Glue. It comes with fine tips to apply and it's been holding up better than the tape.
@@SicErikTech thank you for the reply. I found pre-cut adhesive for this phone on ebay (shipped from China). I will also buy this glue you mentioned above just in case I need it.
There are plenty on eBay for like $4 or $5 & shipped from the USA too. Stay away from China shipping if you don't want to wait a month to receive the item.
So i did this, my phone was working good prior to the replacement, only issue i had was i had to turn my speaker on and talk through the mic or else the mic wouldnt work over the earpiece.
I went ahead order this part the whole flexcable charging port, mic unit... replaced it. (ive been replacing stuff on andriods and iphones for personal use past 10 years)
and for some reason after i put everything together, the phone only vibrates, doesn't give me any display. I have tried the method of hard restarting it, volume up and power as well... all it does is vibrate in different patterns. i think the phone turns on but doesnt give me display at all. i opened up the phone like 3 times now to address this issue to see if anything is loose but nothing is loose. everything is good. ive checked it like 3 times now over and over doesnt work. even tried throwing the phone in the freezer, same result, only vibrates... any idea what could be going on with it? LG V60 ThinQ
I can say is to double check all ribbon cables for tears and check lego connections, make sure they are connected correctly.
Any luck in troubleshooting / final repair?
@@YbarraProductions nah bro, kinda just gave up on it, trouble shooted for 2 days straight no luck
@@evtpr3dat0rx62 yikes, looking to repair myself, don't really want to cough up the $200+ to get it repaired, but I guess there's no problem -free solution here
@@YbarraProductions im not sure if it has to do with the part that i installed maybe a counterfiet one, i might give it a shot by putting back the old one since the phone was fully functional except the mic... that being said, i can only do it if i find the old part lmao
What icons/wallpaper are you using
play.google.com/store/apps/details?id=com.arrow.wallpapers.wallipop
when I reconnected everything the front camera stopped working it turns black help?
Just double checking all your lego ribbon connections before glueing the back on. Power it on first. Sometimes the connections aren't secure
Thank you very much this video was extremely helpfull!
Your very welcome 🤗
I just want to make some update on my comment I bought cable but it's not arrived yet and I have suggestions like get silicone seal to keep dust and debris out and buy good charging cable and charger
I started to wirelessly charge. Not a big deal. I've noticed if you press down hard on the charging cable against the port it starts to take a charge, so I'm guessing the inside of the port is a little warped or something
Of 4 LG v60 I bought used, 2 have bad ports. That's just terrible for a 1.5 year old phone.
No point spending money to fix them, since you can buy them used for $100 these days.
Really? Where are y from?
In indonesia the price still at $400-500
Fantastic. Thanks my friend. I'll try
Is this for the regular v60 or is it for the 5g model as well?
5g, isn't there only one version?
Yes
Hello guys I replaced the cable with new old one and everything is ok it changes with every cable that I connect now I can replace the charging port on my old cable and see is the port or something on the cable itself
This is an awesome video. Thanks homie. How much would you charge to do it.
Lol, I have no idea bro. I'd be afraid to mess up your phone lol.
did your usb port got broken again?
No. Still going strong. Might try a different tactic on my second V60.
@@SicErikTech hey, is it still working today?
Don't know if to fix mine or just do the wireless charger route
@@iseerashonal821 I don't have the white one anymore, did a giveaway. I've got a blue one, did the replacement and it's still working today
Is this T-Mobile version??
Yes
I assume you lose waterproofing
Yes
Please make this one video next time
Probably would of replaced the battery at the same time just to have a new battery so that wouldnt have to be done again anytime soon
Та сама історія, заряджається лише за допомогою безпровідної зарядки, а провідною зарядкою щось не дуже.
I will not be doing this. If I did you'd have to title the video, "How I ruined my cell phone."
LG v60 thinq 5g charger step. Price.ok.
And now don't have ip 68
This is so damn annoying, as I wondered why my android auto kept disconnecting! GAH
And I've got my cable from AliExpress for 25$