⭐2005 Chrysler 300 - 2.7 - Overheating
HTML-код
- Опубликовано: 10 май 2018
- For MORE great Auto Repair Videos, visit us at www.OnlineAutoRepairVideos.com Video on diagnosing a 2005 chrysler 300, with the 2.7 engine, that is overheating
PLEASE NOTE:
This channel is a member of The Astral Stars. We have a zero tolerance policy against the harassment of others, and foul language. Violators of this policy will automatically be BANNED. For further information, please visit TheAstralStars.com
If our video(s) have helped you repair your vehicle, consider making a small donation to Astral Auto Repairs!
PayPal: www.paypal.com/cgi-bin/webscr...
CASH APP: AstralAutoRepairs PLEASE NOTE: We are a member of The Astral Stars, which means we DO NOT tolerate any bullying, name calling, or negativity of any kind. Anyone who violates that policy will be BANNED. For further information, please visit www.TheAstralStars.com 
Авто/Мото
Dude! We almost did a water pump! Been bleeding it for days! Replaced the radiator, thermostat, oveflow tank and it wont stop bubbling out the overflow-still overheating! I'm so glad we watched your video! I'm going to try your trick tomorrow but that's got to be our problem! Thanks so much! Keep doing what you do! Love watching you work!
Change the radiator cap
Did the overflow bubbling and exploding sortve affect the car drive ability because mine lost power when I gave it gas it was choking out a little bit wouldn't go any faster than 20
Astral I want to thank you so much! So 06 Chrysler 300 2.7. Had overheating issue cracked my radiator. So i went ahead and changed radiator and changed thermostat. As you know changing the thermostat on this car is the biggest pain in the ass. So after replacing everything and putting in 50 50 Mopar antifreeze combo. I start car, put ac heat on low and wait and it just starts bubbling. Gauge in the middle i decide to take it around the block and gauge goes up just like the video. Watching the video reminded me and taught me how to correctly bleed the system. Also the little trick about the fans coming on and off making it likely my water pump was still good made me feel better. After i bleed the system BOOM I'm rolling again. Thanks a lot man. You gained another subscriber and helped me out. THANKS!
Thanks DIYFellow!!!!
I got ripped off… and now this has given me hope.
it took several days to fix my car and I think with this video I solved it thanks very good I learned a lot
Great to hear!
My elderly roommate has a 2009 300 with this lovely 2.7 engine and this is the SECOND time this coolant bleeder housing has failed! The first time she had it towed to a shop to be fixed and it was like a $400 bill..now, 2 years later..happens again! This time I say I'll change it out..you could see a huge chunk of plastic blown off the hosing and coolant all over the engine..she barely made it home from Orlando here to Tampa! A few blocks from home in the BK drive-thru she noticed steam coming out of the hood and her gauge rising up..So anyway..I got the part replaced it praying the whole time and filled it up burped it and bled the air the way you said not to!! Sorry! Im a week late watching this!! I also ran the engine with the heat on high and it got FIRE hot!!! Especially when I revved it up it was HOT as a trailer in the Florida summer heat without A/C!!! So tonight she is driving to St Pete and this is the first time driving any distance since I changed that part..many other videos say that something had to cause the part to fail as it should not blow out like that but I hope it's not a problem..car is granny owned and driven barely 80K miles and oil is changed at 3K miles every time as I told her these 2.7 are known for sludge..Let's hope I don't get a call tonight from the highway!!!
Have to say with all that temperature reading it brings back memories when I had open heart surgery they did temperature readings on me for 8 hours segments. And for all eight hours of temperature readings they charge my insurance $35,000.
OMG, and THAT is why insurance is so high these days. I think I'm in the wrong field!
Great video I have a 2006 Chrysler 300 and it does overheat I have changed the cap and put a new thermostat on it and it still over heat
You got the right method and I use 25% by volume concentrate then finish filling up with 50-50 mixed coolant. Did comment three years ago. I use Mopar coolant runs a little cooler overall. Thanks again.
I've never seen that much air bleed out. Ever. I was killing myself laughing.
Astral for the win!
LOL, me too!!
Omg i was LMFAO😂😂😂😂
What was making it that much funnier was Astral`s reactions from start to end 😂😂😂 Omg good shit! I don't think I've ever laughed that hard watching a RUclips video.
@@mr.e7898 😂😂
Lmfao
Great video. Love it. Thank you
Thanks!
Love the video a lot of good information in there and I couldn’t help but laugh that you sound a lot like Kevin Hart !! Haha 😂
Thanks, LOL I get that a lot
Hello Tim i am having the same trouble with my vehicle. Its started to have an overheating issue after replacing the reservoir tank. It was replaced because it was leaking. It started to run hot and would steam out of the cap. The mechanic switched the thermostat and supposedly bleed the system. The car was fine for a day the next evening it started to run a little hot. The guage would go up. And then down. I ran the ac and it seemed to help. The fans are working in high from what i can tell. But i don't know about low speed.
That was awsome now have better idea what to do with my 2.7 litre haveing same problem over heating but same mistake was filling it up while motor was running so hopefully tommrow morning my problem is fixed
Thanks Gordon, and keep us posted!
Same issue.. changed everything but the radiator.. still doing it.. changed cap 2 days later still doing it.. my problem solved lower hose was sucking itself shut under a load.. took out air box put in a go pro n could watch it..
I have an 07 chrylser 300c and haven't found the problem for months now, suspecting it's my radiator overflow cap too because it's the original cap from 07 and thinking the spring just isn't holding pressure anymore. The car would overheat after driving and when I sat a light or something the temp would just keep rising to 3/4 or redline. Had a radiator flush, headgasket check, hoses changed, new waterpump and belt, different coolants made for the car. Only thing I haven't done is a pressure test and that temp gun radiator test you did
Keep us updated on what you find.
Great video!
Thanks!
Hi, did changing the radiator cap fix the overheating?. I'm having the same problem. After watching the video I changed the cap. Still overheating. Can you please help. Thank you.
I got the same engine 2.7 i recently broke the metal pipe that connects to the bleeder housing.....how do i change it do i have to take it apart ???
Good evening, on my 07 Chrysler 300 2.7 August 30 2022 I had ac on and then I noticed a squeeling and smell of burnt rubber. I turned the ac off the squeeling went away and the Burny rubber to. Turn ac on and squeeling started. I know I had over 40 PSI on compressor. Thanks
Your ac clutch is bad. Happened to me a few years ago.
looks like the big gasket is missing off the test cap. Have you ever heard of anything that will clean head gasket sealer out of the radiator? Got new head gasket, but now runs a little warmer then it should. And heater core clogged. New radiator cap new water pump and no leaks. This is also a chrysler (Plymouth actually) but has no bleeder valve. Older 4 cylinder is why. Dont think it requires bleeding. As always great videomanship..and informative. Thank you for doing them. You should get a public service award.
I barely turned on my car , heard water running down some tubes or something infront of the dashboard. Instantly started over heating. Checked the engine the reservoir tank was bubbling a lot. Radiator is 1 month old . Grabbed it new . So idk man
I have a 06 Chrysler 300 3.5L v6 that overheats. When I drive it it doesn’t over heat but when I sit a a red light or something it starts to. Then I do a little more research and find out my radiator fans ain’t coming on. Idk what to do can you help me
You have to find out why he fans are not coming on. Chrysler does have an issue with the fans not lasting long, so it just might be the fans. Hope this helps!
have the same issue but have air in my coolant system... no oil and coolant mix think its intake manafold.
Did all of these troubleshooting procedures and it runs high, but not hot. Any ideas?
I have a 2006,2.7L Chrysler car. It had overheat issue because the fan doesn't rotate.
When you disconnect the thermostat switch,the fan rotates,but stops when you connect it back. I am afraid of driving the car while repeating this exercise.
What do yo think is the actual issue?.
Thanks I replaced the water pump it was leaking through the weepy hole also replaced trimming chain and thermostat as well and it has the same symptoms, I’ll bleed it correctly tomorrow, it got cold and I’m old 😅
LOL, yeah, I know the feeling, LOL!
About to do this god bless was about to change the thermostat gonna try to bleed it in the morning will return to update
Onsyte1 is my Mobile Vehicle Repair. I say vehicle cause I have 38 years experience of auto to street sweepers to Freight liners to earth movers.. But thumbs up to your information
Hey guys thanks for this video that was a great job i subscribed all ready thanks you the best...
Thank you!
I have heard the rad-cap could cause a overheating condition. This is the first time witnessing it. Air lock will cause a flow restriction. I suppose different engines have unique issues. I learned something
I guess it's true, you learn something new everyday
How was pinching the hose stopping it from running hot?
Very helpful! Thank you. A friend of mine has a 2007 Dodge charger with the same engine and the same problem. I wasn't sure where to begin, but now I know what to check first before dropping big money on her car. I hope it's the same thing.
Cool Adam, let us know what you find.
I have a 06 chrysler 300 and it runs for a while but then itll overheat and most times itll overheat when it hits 3000 RPM. Also when i turn on the ac the fans dont turn on i tried changing the relays and still didnt turn the fans on but they do turn on when the car heats up. I dont know what else it could be. When the fans come on when it heats up they cut off when it cools down so i dont think its the water pump. PLEASE REPLY AS SOON AS YOU CAN I NEED YOUR HELP
Could be your thermostat. Also check the strength of the antifreeze, check for a clogged radiator, and then make sure the system is bled correctly.
Elo DaMigo same here
Did you get it fix?
I have a 3.5 L. The fans don't cut on unless I switch the relays around. Even when. It overheats they don't cut on. Heat was blowing good I've bleed the system. By the valve and steady flow of antifreeze came out. Could it be temp sensor
So you mean, you replaced your fan relay with a different relay and then the fans come on? It sounds like your fan relay is no good.
Just watch the video did a wonderful job and do you have any videos on Chrysler 300 3.5 engine
Thanks Jermaine!! Here is a complete playlist of all our Chrysler repair videos, for now: ruclips.net/video/su4m87_j8Ks/видео.html
Great video. I'm commenting from Australia and trying to diagnose overheating on my sons 2006 Renault Laguna 2. It can idle ok for 20-30 mins without overheating and there is no coolant loss. Drive for about 20 mins and it overheats. It has two bleeders - one on the thermostat and one slightly higher on the heater hose going into the bulkhead. Lots of good info in the video. Thanks.
Thanks, and let us know if you figure it out and what it was.
I have 2008 chrysler 300 2.7 v6 and i have a overheating problem bcos the fans dont come on we checked fuses relays the CHT AND THE cooling fan control module but yet the fans still dont come on? Can you help me with why the fans dont come on the fans motor works
Hello did you get it fix? I have the same problem and been struggling for months
I just rebuilt my 2.7 in my 300 has new timing chain set, will an air pocket in the motor make the water pump chatter?
No.
Hey Tim, I Saw you do it Chrysler 300 on one of your segments I have the same issue with my 300 overheating
Hey brotha i have a 2006 chrysler and in the reserve tank i noticed that the water is coming out milky i was told that was happening cus i had a blown head gasket and before the water started turning like a milky substance i was overheating and leaking water but cudnt see from where it was like just drips of water any way u can help with sum advice or information i took it to a mechanic but wants to charge 1500$ and im trying to see if theres a cheaper way of doing it on my own
It sounds like you have a blown head gasket. The best advice we could offer is search on RUclips for a video on doing the head gasket.
Great job!
Thanks Hector! In one of our last videos, I actually started saying "Easy Peazy, Put It In Your Pocket", LOL!!!!
Lol
Here it is Hector: ruclips.net/video/QITv2Bqfxxc/видео.html
what can I do to my 300chrysler 2005 model, If I drive for an hr it always overheat. pls kindly advice me for the appropriate solution
Check to make sure your fans are coming on, and that the system is bled correctly.
Its probably your water pump .
Can I air bleed my 2006 Chrysler 300...cuz I think that cause coolant cap pop off and coolant leaking...! So what you think..?
Yes you can. It should have bleed valves like in this video.
I did change thermostat
I have the same problem with my chysler 300 2007 but in my car sometimes the temperature gauge stays down and I don't know where to start. Any suggestions it will help me a lot.
So it overheats, but the gauge stays ALL THE WAY DOWN?
@@OnlineAutoRepairVideos yes sir and this is the code on my dashboard p2181
I have the same issue on an 09 charger 2.7
I have this same issue on my 05 300 3.5 it overheats and the temp gauge does not work and the fans never kicks on I tested the fans and they work but thay never kick on
Where u located need help with my 06 300c 3.5 overheating
What would cause oil residue in the coolant tank of a Chrysler 300 2.7 or 3.5
Is it motor oil or transmission fluid?
Astral Auto Repairs it’s dark looking I don’t think it’s oil but it’s a 2007 model
@@Dark_Knight-gt6wu Could be rust if it's brown.
Astral Auto Repairs it’s black I’ll have to take a photo for you
@@Dark_Knight-gt6wu Definitely send me a picture to Tim@AstralAutoRepairs.com
Ok so now I’m going to go donthis to my 05 stratus with the 2.7 that’s been sitting for 2 1/2 years cuz I was told the water pump is going out and it’s $1200 to fix it..the whole sprocket ran water pump and oil pump and timing chain replacement ordeal..
I have done this one before and I did radiator water pump thermostat and still overheating then I did radiator cap and it's fixed I wish I seen this video before good job astro
Having this same issue with my mother-in-law's 2009 Chrysler 300.
I changed the thermostat and partially bleed the system. It still runs hot. Dud think to check the cap. Hope it's not the water pump.
Where are u located i have a 06 chysler 300 that over heats
I still having problem with my Chrysler 300 I put new thermostat and new radiator distilled overheating
I got the same car but a 2009 and its starting to heat up I got a new radiator but they Didn bleed it so what do you think I should do
If it was a shop, have them bleed it. If not, you can definitely bleed it yourself.
@@OnlineAutoRepairVideos ok if I do it myself do I let the car warm up are just go out there and do it
Cold car, open the bleeder fill the antifreeze until the antifreeze comes out of the bleeder.
@@OnlineAutoRepairVideos ok I really don't know what that mean so is you saying do it cold
Bro my car has the same exact problem!! 07 Charger 2.7L , I have a brand new cap and reservoir installed but it keeps overflowing. Replaced everything from the cooling system. Pressure test holds up.
Be sure the system is bled right, and if so, give me a list of parts you have replaced.
Astral Auto Repairs I replaced the water pump , thermostat, timing belt, radiator upper and lower hoses and the coolant reservoir tank
Astral Auto Repairs I did a block test as well. It passed
@@frankieslim3322 Next thing is to check the radiator for restriction.
Astral Auto Repairs do caps make a difference? I have 2. One 16psi and another 18psi.
Good Job Timmy!
Thanks!
Hi Tim, same thing going on with my 2005 Chrysler. had hole in radiator changed that out, water in tank boiling, mechanic suggested change thermostat. I let the car run with cap off tank and boiling stopped. Had thermostat changed next time in shop. p codes; 2181, red thunderbolt came up. Now running hot, boiling in tank, all fans running low speed with heater on. I'm thinking has air in system. Any suggestions??
Hey Sarah, did they bleed the system once they replaced the parts? Also, let me know does the car have heat, because if there is no heat, that is a good sign of not being bled or no circulation.
Hi Tim. Probably did not bleed and there is no heat unless at idle only when accelerating. That was one of my complaints & why the thermostat was changed. By that time I was not using heat but yesterday I had the heat on to test if fans were working and there was no heat.
Thanks for your timely video.
1. they have to make sure the system is bled right, or 2. there's something wrong with the water pump.
I'll have it checked out. Thanks
looks like this video will help me out big time.let find out
Great, let us know how it turns out
I have a 2007 2.7 chrysler 300 and it gets hot when i turn the ac on what can it be?
Check your fans
Hi I have a 2.7L V6 2007 Chrysler300 and my car runs hot. I have a new thermostat in it and I took my car to 3 different auto repairs. The first one say my engine blew out which was a lie cause my car was still running. The second one say I need a new water pump, gaskets and injections. And the last one say since my engine shakes that means my engine is bad. So what do you think I should do?
Is there smoke coming from the tailpipe, do you have a check engine light, and if so, what are the codes?
@@OnlineAutoRepairVideos I dont think there is I just know when it gets hot the car starts to smoke under the hood. No check engine light comes on.
First, you need to figure out why your car is overheating.
@@OnlineAutoRepairVideos They said it was some type of wire underneath my car that came unlose. I think it was called something like a H2O wire its connected to my engine and something else.
That wire will not cause the car to overheat at all. Do you have any receipts of what they diagnosed?
1994 toyota camry 220si when turning the car on enjine light flash 1 and then 4 but struggle to start
hi. how can i relase the air on the 5.7 ? only on the WaterPump?
If you need to bleed the water pump, you will be bleeding the entire system. to do that, there will be a bleed valve on top of the engine.
awesome diagnosis, esp. the idea to keep bleeding the system, and close off the tank hose.
👍
I changed termost ,radiator temperature sensor and my car still leaking the from reservoir tank has a little hole on side what else can i do but is not overheating just leaking the water by the little hole when midway temperature gauge
Have you tried replacing the cap?
not yet but is gonna be the next step and take out the air and anything happend i will let you know thx again
@@joseurtiz9598 Let me know!
the problem in my friend car was the Radiator cap thx bro again
you won a suscriber🤝
👍👍👍👍💯💯💯💯
I own a chrysler only by the grace of god can you get these things to work sometimes.
I have replaced: waterpump, thermostat, Radiator, and filled car with 50/50 coolant but not sure how to bleed the system.
You should see a bleed screw, open the bleed screw, fill the system with antifreeze until the antifreeze comes out of the bleed screw, tighten the bleed screw, done!
@@OnlineAutoRepairVideos ok thanks i just ran scan on car and its telling me that my driver side catalytic converter is bad. Is that what caused it to over heat, because it was has never over heated. This engine was rebuilt and has close to 9,000 miles since rebuild.
The cat would have to be completely clogged, and I doubt yours is. What happened to your last motor?
@@OnlineAutoRepairVideos waterpump broke and coolant leaked into crank case and messed up all bearings, also was overheating
Get a hose put it on top the bleeder valve put the other end into the coolant tank and let it run until no bubbles and close bleeder screw, replace pressure cap and done.
2005 dodge stratus overheating bad water pump ran hot cut off on hwy check oil and no oily
Oil was empty top oil cap was off 4cylinder some say head gasket bad, some say water pump but water want go threw motor. It shoots back out the hose when putting water in my what do you think?
What happened after the customer put on new radiator cap
Haven't heard from him since.
My 2008 Dodge Charger 2.7 is doing the exact same thing when I’m driving on the highway with the air conditioner on once I come to a stop I notice the gauge rise up but once I turn the air off it’s goes down I don’t understand.....do you think I may have air in my system as well?
Check your fan and relay. Does the a/c work?
Astral Auto Repairs yes the fans and the relays are good
Ok, check your thermostat, water pump, and does the car have a leak
Blown head gasket. Mine did the same thing. Get a block tester from advance auto and check it.
I got a 2007 and after getting in an accident this started happening
So, same problems with my car. Do I just replace the radiator cap?
No, there are MANY reasons why a car will overheat, this is just one. Your problem may be something else.
Astral Auto Repairs I’ve replaced the water pump, thermostat, radiator, radiator cap and bled the system but every time I start the car up it overheats making coolant/water spill out of the overfill tank and then I bleed it again and air still seems to come out. What should I do?
Are the fans coming on?
Astral Auto Repairs, they are but i don’t know if they stay on.
That's good they are coming on. Is there a way for you to do a video on the car overheating?
He sounds like Kevin hart lol
lol
Sorry Timmy. I thought she was asking me lol. Im just learning.youtube. I looked at my notifications and she was there. Then I realized its not my place to do that.Wont happen agian.
Hey Will, I think she was asking you, LOL. It's GREAT to have additional input on questions because i can't get to them all, so you have no idea how much I appreciated to see your reply to her, THANKS SO MUCH!!!
Hey so I changed my engine coolant sensor, thermostat, and water pump and unclogged radiator, fans are coming on, did a head gasket test through the antifreeze in the reservoir and it’s fine no signs of blown head gasket please what else can cause my car to overheat
Those systems have to be bled properly, also check the radiator cap.
looks like a slight leak from exhaust. head gasket.. i had the same thing
Hey Kadeem did you fix your problem having the same issue
We’re are located boss
North Carolina
My 2016 300 overheats when idling
For all repair questions, submit a repair ticket to our HELPTECH team and they would be glad to help: onlineautorepairvideos.com/helptech.htm
Mine overheats when it sits idle, specially if the ac is on. I can drive it without a problem, unless it was hot already then it just keeps going up. It cools down when i shut it off. Really sick n tired of my chrysler at this point..it's a money pit.
They are known for their fans going bad. The high speed side of the fan burns out.
If only I had a name like Stephanie Pooch 😭
Lol
Just went through the same thing with my 2007 300 3.5 replaced the the water pump the thermostat and housing and was told that it was the heater core. Luckily I didn't replace the heater core I flushed it and it still was overheating so I bypassed the heater core and it still was over heating and it end up being the radiator cap. Over $800 i spent and all along it was the cap! Smdh
WOW!!
I sure hope this is my problem, am all blaming my brother, for not changing the thermo right, so all go buy a heat gun, or just buy the cap, scary i tell ya, same thing didnt happen until i change the whole air housing , sad my bro just went to prison, but probably good thing, i would of blamed him! Well all try thk u truly
You sound a lot like Kevin Hart haha
Lol, a lot of people seem to agree with you.
You sound like Kevin hart
Clean that car
Chrysler 300 was known for having a defective overflow jug. My stepdad has a 300 SRT and use to try and overheat. It was the jug. First they thought it was the water pump. Car only have 50k for a 06.
Thanks for that info, the customer not too long ago called...
He replaced the cap, THEN, get this...it started leaking from the top of the radiator. I found this REALLY strange because we had that car running for AT LEAST 45 minutes and not a drop...
By the way, same thing here, someone told him it was the water pump.
Astral Auto Repairs he might need to check and if his jug has a recall on it. Specially it's a year younger then my stepdad 300. And you right about the fans having two speeds. Also I see he has the green coolant my stepdad owner manual recommend the orange. idk just because it's a different engine are not. But he also had everything changed water pump thermostat then the jug.
@@OnlineAutoRepairVideos Any news on a final diagnosis? cap - was it also the jug?
@@masterdecker9203 we have not heard anything else from the customer, so I would say that was it.
Can you be my machine
thats what you get with HARBOUR FRAIGHT TOOLS get the real deal , you are a professional don't you .Stant ST270-12270. search also Tooltopia.com . blessings Brother.
Every car video I watch they usually pull out a tool from harbor freight at some point
You probably saved him a 2,000 head job that they would have sold him and in the process they would have changed the tank and cap per recalls . And he would have had no idea it happens all the time .. The AC scams here in Vegas are Crazy ...
WOW, and that's exactly what I told him on the head gaskets!!