Just trying to clarify: I called and asked about getting a slide cut done for an Aimpoint Acro P-2 because I was having trouble on the website. Customer service told me it has to be an optic GlockStore sells online. 6:07 "We do the slide cuts for every optic." Which is correct?
Sent my Gen 5 Glock 19 slide off and did the slide cut/optic purchase through the Glock Store. Received the slide back within a reasonable time. I had to wait longer for Safariland to send me the RDS holster I ordered! All the fellas at the shop are impressed with the work too. If you're on the fence about pulling the trigger on this, just do it. Far better than having the MOS versions and having to deal with mounting plates in my opinion.
I'm in CA and mine was done and back to me super quick...challenge met. When you call they tell you it will probably take longer but the reality is it didn't
bought a brownells slide made by zev slide cut front serrations for 200 bucks made to oem spec, 3 days it got to me and no time having to be without my slide
I got my glock cut and came back a little rough but on time. Installed a romeo zero and the right screw hit the ejector spring. It prevented the round from loading and ejecting. I shaved it down a little and fixed the problem. Just letting you all know. Love the Glock Store!!!! Love their products and service!!! Have a great day!!! Stay safe!!!
I love my holosuns. I have to go with just the dot tho because with the circle on to there was just to much going on and i was allot slower. I got a 19 and a 26 i need to send in and get cut so I'm going to look into that but it just gets expensive when you don't already have the optic.
Gonna send my G45 once I get a chance to shoot it a little more. It's a recent purchase and I love it. A weapon light and an optic will make it perfect.
I don't know what's with this Lenny guy. He has a memorizing gift that make me watch him even though I have enough Glocks and accessories, I don't need anything from him.
Can you all install new sights while the gun is in for the cut and optic install? Especially when it comes to cowitness and the need for suppressor sights?
I had a bad experience using this service on my Glock 19 (Gen 3), The slide was returned with in a timely manner but with the following issues: (1) the installation plate was lose and obviously not screwed down tight, which should have been caught by the installer and quality control inspector; the red dot and plate wobble; (2) the Trijicon iron sights recommended by customer support to co-witness a shot with a Holosun 509T X2 installed are obviously to short to co-witness a shot with this red dot installed; (3) the red dot has wear marks that should not be present on any new red dot, like it has been his holstered or laid on a hard surface. I have been a very big fan and customer of Mr. Magill and the GlockStore he has built for all of us who shoot Glocks and want the very best equipment for our protection and the protection of our friends and family. He has done which a great job and his RUclips videos are so helpful. I have reached out to customer support and am hopeful that prompt corrective action will be taken to correct these problems. I will post a follow of my experience working with customer service.
Update. I received a shipping via email to return the slide, optic, and suppressor height sights back free of charge to me-good thing. Got confirmation via tracking number that the items arrived at the GlockStore on a Monday but have never heard back from anyone despite three email requests for an update-not a good thing. I finally called and was told my order was corrected and on his desk and would be shipped to me in a day or two, which was 3 days ago-frustrating. It has now the.9th business day since the GlockStore received my shipment for creative action, which is a total of 19 business days and running since the GlockStore received my slide for installation of the red dot and suppressor height sights recommended by the Glcokstore expert-not a good thing. I understand that sometime s@it happens and destines cannot be met despite good faith effort. Update to follow,when I receive my order back with the proper corrective action and in good shooting order.
Received my slide back on business day 19, but they overlooked the iron sight issue. Contacted them and they offered to take care of it, which is great but more delay. I am doing some of my own research about the best iron sights to cowitness a shot with Holosun 509T-GR X2 on a Glock 19 (Gen 3). I would advise anyone who plans to use the service to do their own research and double check customer service recommendations. My overall impression is that the shop is competent but is under intense time pressure to meet the 10 business day return promise and may need to implement a quality control process where 2 or more individuals look over every order and customer correspondence before shipping back to customer to avoid the kind of issues that I experienced. With those things in mind, I will,probably be sending some of my other Gen 3 Glocks in for the slide cut, optic installation, and cowitness iron sight installation. I have done business with the Glockstore on a couple of other occasions without any issues.
Just bought an RDO and I’m torn between this service or just buy a new slide. Why is the cut $200 for a G19 Gen 3? I can buy a whole new slide optic ready for that price.
I’m sorry but I did exactly what the instructions for shipping to have my 43x milled. Stephen Kellberg in shipping emails me that the USPS box arrived with an open end and no slide! My response was I purchased insurance, please send me pictures of the box and damaged end. His response was there was nothing to take a picture of. 6 weeks later I have zero recourse with USPS without the information that ever shipper should retain, especially a firearm component. Clearly a light slide shipped in a USPS box did not open itself. Wonder how many items go missing when you have Glockstore on the address. Tell Stephen thanks for his hard work.
Do you guys answer the phone anymore? You guys had great customer service before and now since Covid it's been crap. I still have not been able to return a part I ordered that was wrong.
My buddy got a g17 mos and I think he got a venom but it doesnt co-witness with his sights. It sits so high it wouldnt even co-witness with suppressor height sights. I tried it and I loved it but I'm on the fence about getting one cuz id want one that has my sights just barely visible at the bottom. I'm not sure which kind I would want to get for that
Im just wondering why, at a price point of almost 600$, a gen 5 glock is not already milled for red dots? Glocks are nice but honestly now a days other pistols are just as reliable, more affordable, and optic ready right out of the box
I have a CZ orange 2 can I send it to have it optic milled I would buy the optic within the store too. For it to comeback already mounted 👍 What’s the model of the holosun cirlcle and dot Thanks
What if I just have it cerekoted recently I don’t see a option for that but a upcharge for bronze I want graphite or only the cut area blued?…I want to keep my coating still on to keep rust protecting I sweat a ton
Are you running a red dot on your handgun?
If so, what red dot are you running?
If not, are you planning to?
Just trying to clarify: I called and asked about getting a slide cut done for an Aimpoint Acro P-2 because I was having trouble on the website. Customer service told me it has to be an optic GlockStore sells online. 6:07 "We do the slide cuts for every optic." Which is correct?
Any one who has bought a glock should be allowed to just send it in and get it cut seems fair to me.
Want my G30 gen 4 or G20 Gen 4 cut to run a Holosun/RMR not sure which ond yet😕
I need my slide cut and I want the holosun507c !!
Mom is getting me a Sightmark mini Spec for Xmas. Been waiting to put it on my Glock 19 Gen 4 MOS
Sent my Gen 5 Glock 19 slide off and did the slide cut/optic purchase through the Glock Store. Received the slide back within a reasonable time. I had to wait longer for Safariland to send me the RDS holster I ordered! All the fellas at the shop are impressed with the work too. If you're on the fence about pulling the trigger on this, just do it. Far better than having the MOS versions and having to deal with mounting plates in my opinion.
Do you mind sharing the cost? Thanks
@@jerseyjoe1677 Total was $539.95 I purchased the Holosan 508T (red dot version not green)
@@erickbaron5526 including the machining right? Thanks 🙏
Thanks for sharing!
@@erickbaron5526 question did you send them the slide complete or did you send it bare?
Lenny, you and GS is #1. Great owner and customer service. 👏
I bought a custom slide and love it, great job.
I just set in my Glock 34. GlockStore received it Jan 5 and it was back to my house on Jan 15 and I live in CA. Could not be more happy.
Love this guy. His videos have been a huge help and has played a big part in me getting back into the sport. Very grateful.
Went through this process and wow, he's not kidding. Great work and a terrific value. If your considering it...do it, you won't regret it.
I'm in CA and mine was done and back to me super quick...challenge met. When you call they tell you it will probably take longer but the reality is it didn't
wad the cut , cerekoted ?
It took JW 3 months to get me mine back. 10 days is Crazy Fast!! 🙏✌️
I send mine and received in 7 days and looks perfect,Thanks Glock Store!!!
I had the slide/cut with the purchased red dot and suppressor night sight plus the slide painted, shipped and back within 6 days
Painted?
You did a great job on my G20!!! Two thumbs up, you installed a Vortex Venom for me
I have the same setup. What did you end up paying? If you don't mind me asking.
bought a brownells slide made by zev slide cut front serrations for 200 bucks made to oem spec, 3 days it got to me and no time having to be without my slide
You will not be disappointed! I am a believer in Vortex!
Just sent mine in, excited for it to get there and get back.
I got my glock cut and came back a little rough but on time. Installed a romeo zero and the right screw hit the ejector spring. It prevented the round from loading and ejecting. I shaved it down a little and fixed the problem. Just letting you all know. Love the Glock Store!!!! Love their products and service!!! Have a great day!!! Stay safe!!!
I love my holosuns. I have to go with just the dot tho because with the circle on to there was just to much going on and i was allot slower. I got a 19 and a 26 i need to send in and get cut so I'm going to look into that but it just gets expensive when you don't already have the optic.
that might be the best thumbnail i’ve ever seen
I left my non slide cut Glock alone and just bought the mos version. An excuse to have two!
What is the price
Gonna send my G45 once I get a chance to shoot it a little more. It's a recent purchase and I love it. A weapon light and an optic will make it perfect.
The thumbnail for this video made me actually laugh out loud for some reason 🤣
Lenny, still cool and vascular after all these years!
wow that’s crazy i didn’t know you where in nashville i’m definitely gonna come and see what y’all have available
is something added to protect the cut *. from rusting? id like to send my 19 c in 🙏🏼
I don't know what's with this Lenny guy. He has a memorizing gift that make me watch him even though I have enough Glocks and accessories, I don't need anything from him.
I love the thumbnail lenny. You are the man. 👍👍
What is the price to have a get cut
Can you all install new sights while the gun is in for the cut and optic install? Especially when it comes to cowitness and the need for suppressor sights?
I had a bad experience using this service on my Glock 19 (Gen 3), The slide was returned with in a timely manner but with the following issues: (1) the installation plate was lose and obviously not screwed down tight, which should have been caught by the installer and quality control inspector; the red dot and plate wobble; (2) the Trijicon iron sights recommended by customer support to co-witness a shot with a Holosun 509T X2 installed are obviously to short to co-witness a shot with this red dot installed; (3) the red dot has wear marks that should not be present on any new red dot, like it has been his holstered or laid on a hard surface. I have been a very big fan and customer of Mr. Magill and the GlockStore he has built for all of us who shoot Glocks and want the very best equipment for our protection and the protection of our friends and family. He has done which a great job and his RUclips videos are so helpful. I have reached out to customer support and am hopeful that prompt corrective action will be taken to correct these problems. I will post a follow of my experience working with customer service.
Update. I received a shipping via email to return the slide, optic, and suppressor height sights back free of charge to me-good thing. Got confirmation via tracking number that the items arrived at the GlockStore on a Monday but have never heard back from anyone despite three email requests for an update-not a good thing. I finally called and was told my order was corrected and on his desk and would be shipped to me in a day or two, which was 3 days ago-frustrating. It has now the.9th business day since the GlockStore received my shipment for creative action, which is a total of 19 business days and running since the GlockStore received my slide for installation of the red dot and suppressor height sights recommended by the Glcokstore expert-not a good thing. I understand that sometime s@it happens and destines cannot be met despite good faith effort. Update to follow,when I receive my order back with the proper corrective action and in good shooting order.
Any updates? Was thinking of using them.
Received my slide back on business day 19, but they overlooked the iron sight issue. Contacted them and they offered to take care of it, which is great but more delay. I am doing some of my own research about the best iron sights to cowitness a shot with Holosun 509T-GR X2 on a Glock 19 (Gen 3). I would advise anyone who plans to use the service to do their own research and double check customer service recommendations. My overall impression is that the shop is competent but is under intense time pressure to meet the 10 business day return promise and may need to implement a quality control process where 2 or more individuals look over every order and customer correspondence before shipping back to customer to avoid the kind of issues that I experienced. With those things in mind, I will,probably be sending some of my other Gen 3 Glocks in for the slide cut, optic installation, and cowitness iron sight installation. I have done business with the Glockstore on a couple of other occasions without any issues.
How much to do an rmr cut on a g20 thanks
I'm about to send mine in
I just sent mine in the other day after watching this video I can’t wait to get it back and I’m super excited!
hows it lookin
Did you get it back ? How's it look how long did it take to come back
Merry Christmas,Lenny.
Was told yesterday in store they can't cut shadow systems or zev, has to be factory oem slides
Can you do the new olight sight?
You are the Man! Love what you do!
Some shops take 4 to 8 weeks. That's way too long. 10 days is awesome. I have a Holosun 407c but I need my slide cut (milled).
Lmao that thumbnail is hilarious lmao. Nice! 👍
You guys do front serrations as well??
Do you guys do the 19x slide??
I wish you guys did other manufacturers, I have a HK p30l that I would love you guys to know and install a Holosun on SMH.
Lenny yer a legend pal, love from Toronto.
Can you do a video on the slide and barrel polishing
hello sir, how many inches is to cut on a glock slide? just for my red dot optic sir. thanks for your reply
How do I mail my slide in it's going to be my first time ever sending anything through the post office or any where
So you’re saying if it’s not complete in 10 days it’s free.right? Is that the challenge?
I would like to get my glock 43x slide milled for optic
Are you able to do ports too?
I love this thumbnail lol
Do you do this for other gun manufacturers or are you glocks only?
Damn that’s a badass thumbnail. How did you find a giant Glock and red dot?
Just bought an RDO and I’m torn between this service or just buy a new slide. Why is the cut $200 for a G19 Gen 3? I can buy a whole new slide optic ready for that price.
So buy a new slide then. Problem solved.🤷♂️
How come you dont offer a cut optic combo for the holosun 407k
Do you need to buy suppressor height sights when milled this way ?
At 1:20, you say, "Every manufacturer slides. Will/does GS cut and install for a Kahr P45?
Makes me want to get my 19x done
sending mine to them next week. 19x
I’m thinking the same too! Did you end up doing this?
@@alldayeveryday2180 How did it come out?
@@plew2629 i did not . I decided to get a 43x mos and it’s the best decision I did
Do you offer nitride or pvd ? Want my 48 cut then black nitride.
only problem is that i dont think you ship to norway
Do you cuz for the Holosun EPS?
Can you do a S&W Shield or is it just for Glocks ?
at 1st it seemed like for all slides but than he said if you got a Glock, I want to know the same question but for a Beretta APX Centurion
@@williamnunez9609 that was going to be my question as well. I have a beretta apx centurion and a full size Apx.
You have another customer if you can do my shield with a Holosun 507
What about the FN 5.7?
Lenny i have a glock 17 with a vortex viper can it be recut to fit the holosun 507c?
I’m sorry but I did exactly what the instructions for shipping to have my 43x milled. Stephen Kellberg in shipping emails me that the USPS box arrived with an open end and no slide! My response was I purchased insurance, please send me pictures of the box and damaged end. His response was there was nothing to take a picture of. 6 weeks later I have zero recourse with USPS without the information that ever shipper should retain, especially a firearm component. Clearly a light slide shipped in a USPS box did not open itself. Wonder how many items go missing when you have Glockstore on the address. Tell Stephen thanks for his hard work.
Can you cut/install for Canik?
Can a Springfield xdm 40 be done with a Viridian rfx 11 shield footprint?
Got the milling/red dot combo, was returned pretty quickly but the glass was chipped somehow. Just sent back waiting on replacement...
Lol, love how offended he gets after calling himself old. "With my eyes, at this age..haha...I'm not THAT old..." 5:04
Wonder if yall would machine a shadow systems cr920
Do you guys answer the phone anymore? You guys had great customer service before and now since Covid it's been crap. I still have not been able to return a part I ordered that was wrong.
That thumbnail really made me laugh
I have a Sig P320 compact, Is it quicker if I live in Nashville and drop off at store, also do y'all sight it in or is that something I'll have to do
My buddy got a g17 mos and I think he got a venom but it doesnt co-witness with his sights. It sits so high it wouldnt even co-witness with suppressor height sights. I tried it and I loved it but I'm on the fence about getting one cuz id want one that has my sights just barely visible at the bottom. I'm not sure which kind I would want to get for that
Im just wondering why, at a price point of almost 600$, a gen 5 glock is not already milled for red dots? Glocks are nice but honestly now a days other pistols are just as reliable, more affordable, and optic ready right out of the box
I totally agree with you. Every gun should be Optic ready.
Maybe for Gen 6 they will.
You’re more than welcome to buy those pistols and leave us outta it 😂
Do y’all only do glock slides ????
I have a CZ orange 2 can I send it to have it optic milled I would buy the optic within the store too. For it to comeback already mounted 👍
What’s the model of the holosun cirlcle and dot
Thanks
Do they only do Glocks?
Lenny, how about cutting a CZ P10 SC for a holosun 507C
Does this include the refinishing or is that an extra 150 so 300 out the door
We always refinish so the metal is protected.
I’m gonna have to send my G22 in.
What’s the website we’re I can send my Glock slide to them
Is it legal to do this yourself?
What about international customers,is it possible to ship a gun from Serbia to you? Love the video btw
Too bad you guys only do Glocks. I live 1 1/2 away and I can only assume the trurn around time would be awesome.
how i wish you have lazada or shopee so that we can order here in the philippines for your product...
Do you do milling for Smith & Wesson M&P slide?
Greetings can you talk about the Glock 36 and if there is a bigger supplier for the
What about the G44???
I need to send my 19x slide
Can you mill a Fxs-9 pistol?
I know this might be be as dumb question but I like the combined price for cut and optic but can you mill a m&p slide?
What if I just have it cerekoted recently I don’t see a option for that but a upcharge for bronze I want graphite or only the cut area blued?…I want to keep my coating still on to keep rust protecting I sweat a ton
Wish I could bring my Springfield XD into yall to have done
Do we have to strip the slide before shipping?
Nah
How much to mill the slide for a Glock 26 with Riton red dot? Thank you
Thanks when you guys do the ACRO 2 I will send it over to yall.
Can you all mill a p320 compact slide?
Im going to do this. Looks good!
Can you do Glock 42? Thanks
Do you guys install height sights too if sending both height sights and red dot?
Can you do the cuts on a Glock 33 gen 4?