Hello. I enjoyed watching your video. I'm debating between version 1.0 and version 2.0, designed for Benz. Are there significant differences in functionality?
Nowhere in the item name itself it says "pro" though; nor "X431", for the product on your link also. It does say inside the device just "Creader Elite 2.0 BMW". Is there a separate "PRO" version?
Great video, thank you!! Besides size what is the difference in functionality between this scanner and the smaller one, 2024 Launch X431 Elite for BMW?
Hi, great video. I've purchased this item.. quick question, how do are enable video in motion? When I go on CIC and personalise it's asking for a value..please could you advise on what to put in. Many thanks
Hi there, can this scan tool do all the special functions , Eg Valvetronic minimum valve lift adjustment, minimum stroke adjustment in special functions, I'm looking at this unit 2024 LAUNCH X431 Elite 2.0 PRO for BMW, TIA
@@ostyman09Yes you must do it for fuel filter replacement. I just did the fuel filter yesterday. I was able to get it started after buying this. You're going to go into "Special Functions" and then click bleed the fuel system. However I had to loosen 3 of the fuel injectors while bleeding it to let the air out. After that it started
Your link takes you to a different scanner...one with buttons on the right, which is more expensive not the one you are reviewing, which is the Creader elite v2.0
Just checked the link in the description and it's taking me to the exact scanner I have in the video (LAUNCH X431 Elite 2.0 PRO for BMW OBD2 Scanner). What link are you clicking?
It's not a Pro version, just look at the back of the unit for the model name. It actually says V2.0 but mine just says 2.0. I just bought the Elite 2.0 BBA. It has a slightly different design, and buttons too. supports Benz, BMW and Audi/VW (and all the other brands related to these companies).
So would you recommend this to i3 owners; i have been having intermittent "drivetrain" warning messages. I suspect that they are due to the effects of the cold weather in the 12v, but I wonder if i need to clear the messages once and for all.
I also have an i3, BEV, 2015. I have a 94Ah battery, can this do the retrofit functions? Also can it run the built-in HV Battery self-test where it will fully charge, then fully discharge, then fully charge again to determine how much capacity it has lost since new? (same test dealers run for warranty claim determination). Also how about i3 Sport Mode enable? I replaced my drive motor with a 2018 motor, so it is the better motor... different bearings (mine failed due to bad bearings). I also replaced the transmission with a new one.
Hi, great review.. question, is this video sponsored by the company or anything like that? Also, Can I code a transmission computer for a mini 2006 as well? Thanks
Hello. I enjoyed watching your video. I'm debating between version 1.0 and version 2.0, designed for Benz. Are there significant differences in functionality?
Nowhere in the item name itself it says "pro" though; nor "X431", for the product on your link also. It does say inside the device just "Creader Elite 2.0 BMW". Is there a separate "PRO" version?
hi does this have the function to
recode a eplacement abs pump
on a mini r56 thanks
Can you update the service history in idrive?
Great video, thank you!! Besides size what is the difference in functionality between this scanner and the smaller one, 2024 Launch X431 Elite for BMW?
"You can run the fuel pump", you answered the min question that I had. Thank you!
Is this work fine with your e89? Can it command the e89 to open the trunk?
You also reviewed the Foxwell NT710. Does the Launch X431 have more functions?
Hi, great video. I've purchased this item.. quick question, how do are enable video in motion? When I go on CIC and personalise it's asking for a value..please could you advise on what to put in. Many thanks
Can you download the manual in English for it?
Hi there, can this scan tool do all the special functions , Eg Valvetronic minimum valve lift adjustment, minimum stroke adjustment in special functions, I'm looking at this unit 2024 LAUNCH X431 Elite 2.0 PRO for BMW, TIA
Does it workvfor bmw e53 2004 ?
I just ordered one of these because I replaced my HPFP and now the car won’t start. Do you know if this will bleed the fuel system?
wondering same thing for fuel filter replacement
@@ostyman09Yes you must do it for fuel filter replacement. I just did the fuel filter yesterday. I was able to get it started after buying this. You're going to go into "Special Functions" and then click bleed the fuel system. However I had to loosen 3 of the fuel injectors while bleeding it to let the air out. After that it started
cheers@@dang5550
Your link takes you to a different scanner...one with buttons on the right, which is more expensive not the one you are reviewing, which is the Creader elite v2.0
Just checked the link in the description and it's taking me to the exact scanner I have in the video (LAUNCH X431 Elite 2.0 PRO for BMW OBD2 Scanner). What link are you clicking?
Thanks for sharing, I was looking for a good compact scanner.
Do you prefer this scanner over the ANCEL BM-700?
Yes, this does everything the BM700 does and more
Would something like this do most or all functions of ISTA? Or would I still need that to do certain things?
When I mentioned OE level functionality that’s what I meant. I can’t think of anything ISTA can do that this can’t, but there could be some functions.
Can it run VANOST test> @@SimpleCarGuy
It's not a Pro version, just look at the back of the unit for the model name. It actually says V2.0 but mine just says 2.0. I just bought the Elite 2.0 BBA. It has a slightly different design, and buttons too. supports Benz, BMW and Audi/VW (and all the other brands related to these companies).
So would you recommend this to i3 owners; i have been having intermittent "drivetrain" warning messages. I suspect that they are due to the effects of the cold weather in the 12v, but I wonder if i need to clear the messages once and for all.
Yes, this will show you the code for that module and you can clear them as wll
@@SimpleCarGuy great. Thanks for this.
Nice ! I bought the ver.1 a while back.
It’s a great scanner!
Sure is ! :-) I'll have to run through the specs of the new one and see if I'm missing out. Thanks for the videos.
Is the engine on or off when you use this scanner?
Car should be in accessory mode.
I also have an i3, BEV, 2015. I have a 94Ah battery, can this do the retrofit functions? Also can it run the built-in HV Battery self-test where it will fully charge, then fully discharge, then fully charge again to determine how much capacity it has lost since new? (same test dealers run for warranty claim determination).
Also how about i3 Sport Mode enable? I replaced my drive motor with a 2018 motor, so it is the better motor... different bearings (mine failed due to bad bearings). I also replaced the transmission with a new one.
What is the difference between x431 Elite 2.0 and x431elite 2.0 FCG
Ford Chrysler GMC = FCG
I bought the Elite 2.0 BBA. Benz, BMW and Audi/VW. And all the other brands related to them.
Can it change the vehicle order?
I am sure it can't. But haven't tried yet.
Hi, great review.. question, is this video sponsored by the company or anything like that? Also, Can I code a transmission computer for a mini 2006 as well? Thanks
i am trying to buy one but i was on the dilema between the 1.0 and 2.0 does the 2.0 has more features or its just the design?
2.0 new version works more quick
2.0 also has a battery, so it's a lot more convenient.
Does it work for Mini ?
Absolutely
Hello guys, does anyone know if it can do coding after swapping CCC module from another car? I hate NCS expert:)
Awesome tool, i'm getting one
Work on X2
This is real trash it cant do anything
What can’t it do that other scanners in this price range can?
funny
But actually what is real difference between 1.0 and 2.0 , only vertical-horizontal screen???
As far as actual functionality.. not much really
It has a battery.
works on bmw e46?
Yes