Sounds like the strokers revs are limited by the cdi or something, I really think you would gain a lot more speed if you can get it to rev higher. Are you running stock cdi?
Bro i have a 1984 honda aero 80cc all stock and that thing rides out. Blows my 2018 gy6 qmb139 away, ordering a bore kit for the gy6 hopefully here soon i love seeing these scooter builds!!! Definitely following
Wow 90mph! Thats like 150kmh on a scooter that weighs about 70kg! I got a Kymco DJ which is almost similar to the Elite. Thats already very quick with a 70cc Airsal, 21mm pwk and a Leovinci exhaust . 150 must be scary when hitting bumps or wind gusts
Gotta love the 2 strokes, every time chuck does a flyby I piss myself laughing,,,,,Can you guys post a build sheet somewhere or tell me where I can find the engine and any work that was done and the tranny info and parts used, Id love to do this as a project
Are you using lighter rollers and 2k torque spring? I have a 150 with a 18/36 gear set and about to change out rollers and springs but not sure where to start to get a better top speed
how do you make a low cc scooter go faster & is it healthy for it? My car broke down & i want something cheap that goes highway speed, until i fix my car.. what should i get?
I’d love to get one of these little bikes just to build and have fun on it. The problem is that I’m a Big dude and I’ll just look like king koopa on it 😂
@@lion3920 try maybe 8g rollers they would probably work, anything over 12 will not work if its stock and anything below 5 will probably also wont work
Send me a message when yall go out! You're in my area and need some riding buddies! Also trying to get my motorcycle endorsement and it's easier with a group xD
You guys got some real rippers! Ride safe mopboyz 😎
Catching up on older vids 🔥🤘🏽
Sounds like the strokers revs are limited by the cdi or something, I really think you would gain a lot more speed if you can get it to rev higher. Are you running stock cdi?
Fastest scooter in the world. Nooo cappp
Im sorry to inform you its not🙃
@@estoganggang7054 uhh yeah it is 🤫
This is not the fastest buddy sry to say
@@gabyfelix8727
Yes he is bro 🤫🤫🤫🤫
@@gabyfelix8727 fastest
This had me smiling the entire time Lol I gotta figure out how to get this setup ASAP
Bro I wanna be fast like that when I grow up lol... Hella fast mopboyz
The polini race 3 clutch is like that fr 💯🤞🏾
Bro i have a 1984 honda aero 80cc all stock and that thing rides out. Blows my 2018 gy6 qmb139 away, ordering a bore kit for the gy6 hopefully here soon i love seeing these scooter builds!!! Definitely following
Sounds beautiful
Another great video! Amazing speeds
HAMMAHH TIME
I’m wondering if you guys in the states ever got the piaggio zip 2000 in the states, would be sick to see a zip 2000/ sp build
Nope we never got zips. Piaggio did send the typhoon 50cc for 2 years. We also got the derbi with the piaggio motors.
Have you checked the Zuma for air leaks? Might be a bad gasket or something.
take the stabilizer off from the gopro settings? pls
GoPro footy so crispy this upload what has changed
Need 2 see some drag races
Leaking crankshaft seals can cause unpredictable idle
OUUUU SHE SCREAMIN BOYS
for the zuma, try with a bigger main jet
That boy movin T nice shit!
Duuuude Robert can still get down! I think you could wheelie the stroker good, you were getting it up 🔥
if the stroker had a rear brake id wheelie it no problem , comes up too easy hahah
@@MOPBOYZ throw robert on that and see what the boy can do 😂😂
yes, if it had a rear brake.... wouldnt want to put anyone on a bike to wheelie if they cant prevent a loop out...
@@MOPBOYZ definitely not, but if hes still got that mullet he can use the locks to slow the wheel 😂
If you dislike trevs vids, your a disgrace, get out the mop boyzzz community, respect to my boi, sick vid again bro 🔥🔥
Wow 90mph! Thats like 150kmh on a scooter that weighs about 70kg! I got a Kymco DJ which is almost similar to the Elite. Thats already very quick with a 70cc Airsal, 21mm pwk and a Leovinci exhaust . 150 must be scary when hitting bumps or wind gusts
Gotta love the 2 strokes, every time chuck does a flyby I piss myself laughing,,,,,Can you guys post a build sheet somewhere or tell me where I can find the engine and any work that was done and the tranny info and parts used, Id love to do this as a project
Are you using lighter rollers and 2k torque spring? I have a 150 with a 18/36 gear set and about to change out rollers and springs but not sure where to start to get a better top speed
Hey bro greets from belguim nic i love fast elite 😎😎😎😊
Where do you buy those kits
how heavy is your roller weights?
Those are roads every biker dreams of! It sucks where i live
how do you make a low cc scooter go faster & is it healthy for it? My car broke down & i want something cheap that goes highway speed, until i fix my car.. what should i get?
I love your toy man.
mr trevor, you should modify a peugeot streetzone, they very nice
Bro how can I buy one of these
👌
🔥🔥
When will you put the 72 kit on the purple elite?
soon, just waiting on a few more parts
2 smoke all day ;)
Damn
I’d love to get one of these little bikes just to build and have fun on it. The problem is that I’m a Big dude and I’ll just look like king koopa on it 😂
Bet the case seals are shit on the Zuma... vintage mopeds this is usually always the case after checking everything.
Recently picked up a 1983 honda aero 80!
Hey Greetings from Germany
Moin :)
@@osnariderz5075 ja moin 😅
Fast
Not the mama not the mama
💪💪💪💨💨💨💨💨🤘🤘🤘🤘🔥🔥🔥🔥💯💯💯💯🤙🤙🤙🤙
guys i have a question. Can i fit 12inch size wheels on taotao bike like the one he rides, currently i have 10inch
that taotao with white wall tires is 10" wheels
🔥🔥🔥🇦🇷
Hey bro, can you help me out. I need to change my variator rollers and idk what size to put them. Can you help, i use it daily.
50cc gy6
Buy a performance roller weight pack
@@user-kd5pi5up2g and which one to combinate
@@lion3920 try maybe 8g rollers they would probably work, anything over 12 will not work if its stock
and anything below 5 will probably also wont work
6.5s
Where the bug????
in the garage
Send me a message when yall go out! You're in my area and need some riding buddies! Also trying to get my motorcycle endorsement and it's easier with a group xD
I'm down to ride. I'm in Vegas
can you link all the parts that is on that moped i want to build one
check out scooterswapshop.com
@@MOPBOYZ thanks im 13 and im looking for a project for summer
if your trying to get a moped i have a shipment of 130 mopeds otw honda dios mint zuma u name it ist there in ca