Fixing This Destroyed Radiator | RM250 Rebuild 37
HTML-код
- Опубликовано: 8 июл 2024
- ★Enter to win the RM250! www.prymemx.com/pages/rm250gi...
★My Store (Pryme) www.prymemx.com
★AVR Radiator Welding avrcustoms.com/products/rad-weld
★Supplies Used In Video
Pryme Radiator Braces www.prymemx.com/products/radb...
Pryme Mini Cleaning Wheel Kit www.prymemx.com/products/mini...
Drilled Washers cjn.mx/drilledwashers
★Business/Social Media
Pryme www.prymemx.com
Instagram / cameronniemela
Facebook / cameron.niemela
★Ways to support the channel★
Bookmark the affiliate link below to make your purchases on Rocky Mountain.
Rocky Mountain: cjn.mx/rmatvmc
★Music
Epidemic Sound www.epidemicsound.com/referra...
Low Chucks - Timothy Infinite
Slither - _91nova
Vivid View - Dusty Decks
Rain Checking - OTE
★Chapters
0:00 Intro
0:57 Straightening
9:42 Bracing
14:02 Cleaning
18:06 Mounting To Bike
19:45 Therapy Session 
Авто/Мото
Tell me your bent radiator stories. We all have at least one😂
Head on with a tree at 80kmh, think that’s like 40mph, snapped triple clamps was the worst part broken 🤣
On my rm85 enduro riding, up a rock face bike fell down caught over 4 metres worth of air and fell straight on a flat rock, split the shroud and squashed the radiator, craziest thing was that it never leaked and I only jsut replaced it, used for 4 years after that
It wasn’t me but it was a freind I was with, we were playing around in the woods and he started getting roost when he hit a corner way too fast and lost control, hit a rut and flew straight into a tree. And a broken branch right next to it miraculously smashed through his left radiator. He got up when we got to him and we just saw his bike dumping coolant all over the ground. He was able to ride it back but it had some heat damage.
Fella fell off infront of me and i ran his bike over, smashed the rad and my plastics up, bent the brace in half, smashed rad, twisted it, broke fins off, over 400 quid of damage😂
I t-boned a unmanned kx500 drag racing
Damn I missed your videos! You set the standard! Glad you are healthy!!!!!!
I appreciate that man!! Thank you
I absolutely love the fact that you take a discarded item that most people would write off (ie trash). Then, you take it and make it functional and show all your steps.
Glad to hear you’re healthy and sell! Hope the wife and kiddo are too! I was not at all expecting the radiator abuse at the end 😂😂 love it.
I've had a few hang ups locating replacement radiators for my 01 RM. I ordered a billet set and the mounting holes definetely didn't work....then I watched some fix-it vids and decided to try JB Weld on a small leak; it held pressure but looked a little bush-wacked for my restored bike....I finally ordered a second set of billet ones from a different supplier and they worked/looked pretty trick! Radiators and the little clip nuts at the bottom for the plastic shrouds are the cheesiest parts on this bike, with a close second belonging to the CDI mount inside the air box, thord has to be either the original wrap-under front brake cabke o r the seat bolts that rarely line up without pressure one direction or another. Over all these RMs are amazing bikes that handle fantastic!
So glad you've been healthy and taken time to shape up your new shop -- Keep up the great work, partner !
Glad to see ya back at it Cam ..Glad to hear your still doing well 😁👍
i’m glad your healthy and back at it, Cam! I’m in Alaska so i won’t be able to enter for this sick build but that doesn’t stop me from learning from your expertise and watching every video!! ✌️
shop's lookin sharp, and you're lookin healthy. soooo good to see yas back at it. keep on keepin on Cam.
Laser cut is fancy 😮 nice work on those rads and braces
Thanks my friend! Really enjoyed this one!
Glad you are back! i have used a lot of your how to videos over the years!
The broken radiator still looks good when you present it like that on rotating wheel 😂
Great to see some content! Been stuck watching your brothers! It would be cool to see the three of you work on a project.
Welcome back broheim! Great news on being cancer free bro, THAT news in and of itself is better than the video. Keep them rolling, love this build
Good see you back man. Happy that you don’t have cancer any more and I know that Suzuki is going to look amazing
MY bike jus keeps getting better n better ! Glad ur back Cam ! 😃👍👍👍👍👍👍👍👍
It’s good to see you still have some kid in you! When I saw that plug shoot out, I immediately thought it would be fun to see how far you can make it shoot, and you did not disappoint. Real men never truly grow up! Or at least I know for sure I haven’t grown up. My wife tells me all the time that I’m her biggest kid lol. Have fun, stay young!
All very true haha! Still gonna be doing this when I'm 70 lol
Cam💪🏻!
Keep putting yourself and family before theTube. We aren’t going anywhere and are happy when you can put out a vid.
Glad you’re doing well!
Grip it and rip it!
Glad to have you back again Cameron. Miss your work! Glad to hear your are healthy!
Bro so good to see you back on RUclips. Glad you’re healthy and doing well!
Mad love from Canada Ontario bud! Woot remission mission! Everytime I see you post, makes me smile!! Congrats on 400k :)!
Congrats on the remission. That is so awesome. Thanks for vetting back at the videos as well. I know the broke to built ones are just around the corner. Yeah baby. I so wanted to be in this round but due to health issues I was side lined. Its all good tho. I am almost healed and will do next round if yall choose to do it again.
Cameron been following you before cancer. I'm glad you are alright with no sign of it. You are champion!
Good to hear that you are healty now. Cant wait for new vids
Glad to see you back on it, missed your videos!!! just signed up for the give a way, RM250 is my favorite bike, fingers crossed!!
Your videos are really great and sooo glad that you are healthy!! Can't wait to see the Suzuki all finished!!
Radiator stories?
Okay, my radiator start leaking after a crash in training.
So straightened it out and epoxy glued the leak. Baked it the oven after the glue had partially set.
Had a race next day and this was a Saturday. Long before Internet and courier service delivering express to your door next day (Eighties).
So, The radiator never leaked again :)
This was an RM125 - 85. Bought brand new for about $1600with today's value. (I think I have one picture of it on my IG with the same name as in my YT)
I am 57 now and still ride, enduro bikes, to old for MX hehe.
Thanks for the upload and happy that your medical is all good!
Greetings from Norway!
I hope the algorithm grabs this one as well
Nice work, fun ending! Pretty deluxe that we can buy drilled washers & not have to sit at the drill press for hours.
So happy to see you back and healthy .. May God continue to Bless you and your Family ..
Great video, first time iver ever seen radiator needlenose pliers, definitely getting a set. Thx!!
Also the blue square thingy is actually called a square or carpenter's square. 😁
Glad to hear you’re doing well and the leukemia hasn’t come back, brother I want to thank you for the book recommendations you gave me back in 2019 that helped my sister fight AML. It’s been 3 years since I was her stem cell donor and she followed those books you recommended, all of her check ups have came out great. Wish you the best, and once again thank you for your help.
I was surprised at how much that radiator could be twisted and still held. I’ve never attempted to correct a radiator. I’ve straightened fork tubes - a tedious job on a press. Thanks for the interesting and helpful video!
Glad you are back and doing well look good man
Good to see ur well...when should I pick up my bike..??
Greetings from Hungary! You are a very good professional!
These Builds & Restoration’s Are Artwork, Plus I Love Learning More About The Craft An How To Care For Our Motorcycles. Thank You Cameron For Teaching The Community These Wonderful Things. 🙏🙏 🤙🏽🤙🏽😃😃👍🏽👍🏽
Glad to hear that your healthy man, stay strong!
I'm glad to see you're doing well, my friend. God bless you and your family.
That was awsome. It was cool to see you testing the braces with a sledge hammer and they held up well. Just proof from all the products i purchased from you due to quality and great customer service i see a potential purchase for those braces in the future for a yz 250 woods bike build
I'm glad you're looking good. I've been watching your videos for some time and I learned a lot. The videos keep getting even better. I couldn't stop laughing at the end. It's great to put some humor into it. Great job!
Happy you enjoyed it! Thanks for supporting the channel, means the world!
I LOVE THIS !
Finalllyyyy
Finally your back man
Отличное техническое решение, отличная работа!
Glad all is well. I love the video where you guys are beating the piss out of the radiator.
I was mildly entertained by the therapy session until you pulled it behind the ranger....that was some funny shit right there!
Glad to hear your about your good health, been missing the videos!
Thank you!
So glad you are healthy. Great to see you again!
This bike is a dream🥰
Good your healt is perfect!keep up the good work !
Hello
From
Slovenija🤩
My 07 yz 125 won’t shift past 3rd gear. Any idea what it is before I tear it apart?
Mantap mesin nya..
Hes backkkkkk!!!!!!!!!!!!
Yessir!!
Whistlin diesel vibes at the end of the video lol.🤣
good to see you back at it man and its called a framing square Cam
How do you repair a half crushed radiator inlet or outlet tube on a dirt bike.
Missed you!
So glad to see you buddy!
glad to see u are not having problems with the big C.,that was to funny.
Cam and Austin. BRoBuiLds. both have keen attention to detail and great craftsmanship. Keep it up boiz.
God Bless You Cam and Family on your health. Take care.
Cam the reason that the CDC is placed in the air box is so it doesn't get splashed with water. Of course they are sealed but the connectors are a possible trouble spot.
That thing is looking so good keep up the good work man🤘
Thanks Owen!
Top job.
Техническая часть очень хорошо!!!ЛАЙК!!!
Coolest brothers ever! Took me a while to realize but I have a jdm car, toyota truck, and a cr125. Which happens to be the things y'all specialize in lol. Keep it up!
Well buddy, I will be anxious to see you go for a rip on the RM!! Long time coming. Then you will build something else awesome maybe for your kid?
Hey cam, you should make a 2nd placetrophy for a consolation prize out of that radiator. 😂😂😂
you have the cabinet for it , you should convert it to vapor blasting!
Love your videos glad you are doing well and healthy🤟
Nice glad to hear from you
Hi Cameron. I have an 05 RM 250 2st. I replaced the inner clutch hub and clutch basket. Gears worked fine. Started the bike to go for a ride and no gears. You put it in 1st let the clutch out and nothing it’s like the bike is in neutral. What can I check?
Yesssss new rebuild vid
Awesome 🤘
Sometimes the vehicle designers build things to bend rather than break (themselves or attachments)
I use small zip ties threw the fins to straighten cooling fins out.
Great to see you again .
I'm happy you're doing better man you're looking good too 🙏💪‼️
Nice jokes I enjoyed it ! That radiator didn’t have a chance 🤫😂
Dry ice blasting is the best for cleaning rads
あなたの動画を楽しみに待っていました。体調が良くて嬉しいです。また次の動画を楽しみにしています。ゆっくり休んで下さい。
Praise God brother! Healed and whole. Wish all the radiations from these rippas weren't all bent🤣 The kiddo's love bending them up!
Good to hear that 🙏🙏🙏🙏🙏
On your hydraulic press cam fit a quick release plastic nob on the pressure release part it's so much easier than useing the metal bar that comes with it & use caster wheels to take out the side slopp Lol 😂
"Blue square thing" is a framing square😎
Now that radiator is ready for ebay, and priced at almost the cost of a brand new oem one. 😊
bro the into music fire man and dope video someone is gonna be happy to win that brand new bke man
thanks you so much for video
What is the best way to get companies to sponsor a two-stroke bike build? I have watched all your videos and it has inspired me to completely rebuild my 04 rm125 and start a Moto channel!
Glad you’re inspired from the videos! You have to prove yourself before anyone will be interested. Post a ton of quality videos and people will start to take note. And when you do get a sponsor, provide as much value as possible and go above and beyond.
Great to hear about your good health 😀
Thanks Damara!
Dropped in my driveway loading up to ride just saw coolant dripping down 7:00am in the morning. Soiled the whole day.
Do you have a link for the Radiator pilers?
now let’s see if Phil Swift can repair it using only FlexTape 23:30
How did I miss this.
Another great vid
Let's gooo your back!🔥🔥
Right on brother!
We're right here with you brother.. rollin through the punches righ here with you brother. YOU DO YOU we'll be here WHENEVER you can upload! We love you brother and appreciate all you have done for our sport. Stay healthy and happy that's the most important thing. We'll watch all your content because it's the BEST! love your show buddy! PS. my radiator story is I was navigating a steep down hill and some rocks tripped me up. Thats when I dropped my 2016 CRF 450R on some rocks and folded my radiator. Luckily I was always watching your vids and I came across the one where you show us how to straighten up a radiator with soem 2x4's. Worked like a dream.
I learned that in some cases heat does help as well
Some of that Cuban mechanics
With that much effort I would rather focus on producing the brand new radiators instead :)
This bike will never be done
If anyone who has a hydraulic press like that one says they have never put the rod on the release and tried to pump at some point in ownership, I will show you a person that lies😂
Nice video man! Can you make those engine case stickers for other bikes? I have a few bikes that could use it. 95cr250, 17kx450f, 20kx250 and a 16xcf350