Just subscribed because you're one of the few that keeps the reviews REAL. I want to see how accurate the guns are and not how well someone shoots which says NOTHING about a guns' accuracy. Keep up the good work and thanks!
I'm super impressed! I never shot an airsoft before. Im not expert regular gun guy. But I can shoot a bit. This gun is crazy accurate. Plus like you said , with the scope was just 😮😮😮😮😮😮😮😮😮. 😊😊😊😊😊😊😊 Thanks!!!
Yeah, This is not a 6mm Airsoft gun shooting plastic BB's. It's a .177 pellets gun shooting lead. It;s called a PCP aistol = Pre Charged Pneumatic Thanks for watching!
Very accurate and solid pistol, at 50m I made a 17mm group. amateur recording for us on my channel. Reximex Throne Gen2 has very good accuracy, worse with quality. Very fast leak on the firing pin. No problem to replace the o-ring, the problem was to unscrew the Power Plenum, they used probably a meter-long pipe to screw it.
Love them! Had it in Canada for a couple of years now. Personally hat the single shot tray, pellets never line up for me. That is my only small complaint. Great single shot flip out loader available from Carm magazines if you are interested. Thanks for the great content and hope you enjoy your RPA as much as I do my RP.
Man this thing in 22 would he fantastic for pesting small mice. We have a lot of them here and it's annoying to have to get the impact m3 or the crown out and swap barrels as they are slug setups and lower the power a ton. Most of the shots are about 22 to 28 yards and this with a pistol scope would be plenty accurate enough and plenty of power. Hell maybe even the 177 would be perfect considering the mice are pretty tiny and 3-4ftlbs would be plenty. I used a Beeman p17 in 177 to do it and it did a fine job on them but i sold it to a friend and really need something to take it's place and this would be not only excellent for that job but would be a crazy fun target pistol as well. Ide like to see if you could drop the hammer spring down to about 400fps with the 8.44s and how well it would shoot at that power level. The reason I'm thinking 22 might be the better choice is the 22 is gonna have less chance of full pass thrus on bigger mice if I dropped the velocity down to around 350 but the 177 at 350-400 will have nothing left after it passes thru anyhow. I really wouldn't want to shooting over 400 in 177 for mice duty, did you check the range of adjustment velocities from minimum to maximum? If so what was the lowest velocity you could get and maintain accuracy??? On these mice literally my 1322 that's fully built in to a 24in barrel rifle and modd'ed to the max and capable of about 18ftlbs with the flat top piston and value at 20 pumps. At 6 pumps it will shoot jsb 13.34 RS pellets right at 270fps and that is perfect velocity for the mice as at the 22 to 28y I shoot them it will not pass fully thru or if it does it comes out with hardly any velocity left. That's why ide love this pistol in 177 if it would shoot like 320 and do so well but would be OK so long as I could tune it down to 400 and hopefully lower. If you have played with velocity at both ends of the hammer spring tune range please let me know what's the lowest it would go. I would absolutely buy one right this second if it could go down to like 320 and will probably buy one so long as it will go down to 400.
Hi there! I love your channel, but never commented. I am wondering, I have an Ataman AP16, and parts are very hard to come by... Looking at what you're playing with here, blantantly looks like a copy, and I was wondering if you could let us know if parts are interchangeable... Specifically the cylinder and sights. Thanks, and keep up the good work!
I have the Artemis CP2, I think it's the Diana chaser in the US with 22. Cheap, can mount a longer barrel, included in the package, and don't need to fill the pcp tank, that's the only reason why I haven't bought a PCP gun. Can you fill the tank with a pump?
Hi, I just purchased Mito and am I ask… when you increase your pistol power did you Adjust the regulator valve and Hummer spring or only Hummer spring … ?
that was probably a HAWKE Airmax: www.tkqlhce.com/click-100005961-12817065?url=https%3A%2F%2Fwww.pyramydair.com%2Fsearch-results-ext%3Fkeyword%3Dhawke%2520airmax
Good question. You would probably want something more expensive....it will work though. I'm reviewing this one next week. www.pyramydair.com/product/air-venturi-comp10-match-pcp-air-pistol?m=4783
Max hammer spring power but you sure that's the max power of the regular? If you got the reg to max it won't give you that much of shot counts We need your help knowing the max fps if we maxed everything no matter what will be the shot count , one mag is enough for me but I need 240m/s at least @@AirgunChannel
I have a throne g2 from 2021. Build quality was intially good but now it is a nightmare with constant leaks and having to reseal. They aren't easy guns to repair and you can't get parts. Just like Kral, junk and should be avoided. Snowpeak is miles ahead of the turk trash being imported.
I have a Puncher Breaker in 25cal. It's been a pretty good gun. I had to replace the cocking handle. I've not shot it over about 500 rounds. Pyramid Air did send me a new handle along with a replacement hammer if it needs one down the road. I planned on sending it to Troy Hammer sometime in the future. He actually said the rifle is well made but has a few improvements that he does for about $200 bucks to really make it shine.
I have a throne g2 from 2022,done like 5 thousand jsb's through it and still laughing at my mate with his m3. Just a little detail no leaks no probs. Perhaps you got a bad one mate. Had kral mortal x no probs with it either and spread of 4 FPS. Changed it for dynamic express and 700 usd down the road on parts and engineered mods still work in progress...
@@husar5100 I don't even have 500 pellets through it. It mostly sat until I wanted to use it. The Throne is also limited to the plenum size and valve. You won't be shooting heavy slugs to great effect like the impact can. I was hoping the throne would have been the budget impact and that's the reason I wanted one. Can't recommend Reximex until the customer support is there. I emailed them directly and they ignored me. Pyramid does not stock parts as of yet.
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Just subscribed because you're one of the few that keeps the reviews REAL. I want to see how accurate the guns are and not how well someone shoots which says NOTHING about a guns' accuracy. Keep up the good work and thanks!
Thank you! I appreciate it! -Nate
Dude the sounds of the plinking was brilliant
Thanks man! -Nate
I'm super impressed! I never shot an airsoft before. Im not expert regular gun guy. But I can shoot a bit. This gun is crazy accurate. Plus like you said , with the scope was just 😮😮😮😮😮😮😮😮😮.
😊😊😊😊😊😊😊 Thanks!!!
Yeah, This is not a 6mm Airsoft gun shooting plastic BB's. It's a .177 pellets gun shooting lead. It;s called a PCP aistol = Pre Charged Pneumatic Thanks for watching!
Nice gun they just keep getting better and better
That's for sure. Amazing stuff coming out these days.
Very accurate and solid pistol, at 50m I made a 17mm group. amateur recording for us on my channel. Reximex Throne Gen2 has very good accuracy, worse with quality. Very fast leak on the firing pin. No problem to replace the o-ring, the problem was to unscrew the Power Plenum, they used probably a meter-long pipe to screw it.
Awesome!
Greetings from Reximex ! 👋🏼🇹🇷💛💛
Have a good experience with your Reximex !
Greetings from Reximex ! 👋🏼🇹🇷💛💛
Have a good experience with your Reximex !
Thanks for watching the video! Here is the Throne 2. ruclips.net/video/-HsR8YyhxuI/видео.html
Is this pistol generally suitable for Olympic competitions?
HOW ABOUT A LOT MORE FPE LIKE THE HUBEN GK1 AND A SEMI-AUTO?????
Beautiful pistol.
Yeah, gotta love that blue laminate!
Greetings from Reximex ! 👋🏼🇹🇷💛💛
Have a good experience with your Reximex !
Awesome video Nate 👌 thanks for sharing be safe buddy 💯
Thanks for tuning in! -Nate
Love them! Had it in Canada for a couple of years now. Personally hat the single shot tray, pellets never line up for me. That is my only small complaint. Great single shot flip out loader available from Carm magazines if you are interested. Thanks for the great content and hope you enjoy your RPA as much as I do my RP.
I will check out the Carm mag. Thanks for the info! -Nate
Awesome pistol Nate
Yeah, there is no way I would sell this one!
That's a pretty cool pistol! Great review, as always, Nate!
Thanks man! Thanks for the comments! -Nate
Greetings from Reximex ! 👋🏼🇹🇷💛💛
Have a good experience with your Reximex !
Impressed the F out of me as always brother
Thanks Dispatcher! -Nate
I have the RPA in the Turkish Walnut coming in next month and cannot wait.🤠🇺🇸
Nice!
@@AirgunChannel Only downside is, it tops out at about 12 FPE. Well, and the fact that it's a single shot. :-(
Man this thing in 22 would he fantastic for pesting small mice. We have a lot of them here and it's annoying to have to get the impact m3 or the crown out and swap barrels as they are slug setups and lower the power a ton. Most of the shots are about 22 to 28 yards and this with a pistol scope would be plenty accurate enough and plenty of power. Hell maybe even the 177 would be perfect considering the mice are pretty tiny and 3-4ftlbs would be plenty. I used a Beeman p17 in 177 to do it and it did a fine job on them but i sold it to a friend and really need something to take it's place and this would be not only excellent for that job but would be a crazy fun target pistol as well. Ide like to see if you could drop the hammer spring down to about 400fps with the 8.44s and how well it would shoot at that power level. The reason I'm thinking 22 might be the better choice is the 22 is gonna have less chance of full pass thrus on bigger mice if I dropped the velocity down to around 350 but the 177 at 350-400 will have nothing left after it passes thru anyhow. I really wouldn't want to shooting over 400 in 177 for mice duty, did you check the range of adjustment velocities from minimum to maximum? If so what was the lowest velocity you could get and maintain accuracy??? On these mice literally my 1322 that's fully built in to a 24in barrel rifle and modd'ed to the max and capable of about 18ftlbs with the flat top piston and value at 20 pumps. At 6 pumps it will shoot jsb 13.34 RS pellets right at 270fps and that is perfect velocity for the mice as at the 22 to 28y I shoot them it will not pass fully thru or if it does it comes out with hardly any velocity left. That's why ide love this pistol in 177 if it would shoot like 320 and do so well but would be OK so long as I could tune it down to 400 and hopefully lower. If you have played with velocity at both ends of the hammer spring tune range please let me know what's the lowest it would go. I would absolutely buy one right this second if it could go down to like 320 and will probably buy one so long as it will go down to 400.
Pp😊😊
Hi there! I love your channel, but never commented.
I am wondering, I have an Ataman AP16, and parts are very hard to come by... Looking at what you're playing with here, blantantly looks like a copy, and I was wondering if you could let us know if parts are interchangeable... Specifically the cylinder and sights.
Thanks, and keep up the good work!
Much different guns AP16 has alot more power and is probably less accurate
Let's freaking go!
Word that!
I have the Artemis CP2, I think it's the Diana chaser in the US with 22. Cheap, can mount a longer barrel, included in the package, and don't need to fill the pcp tank, that's the only reason why I haven't bought a PCP gun. Can you fill the tank with a pump?
Yeah, The Chaser is the best.
Great video,
I just ordered my own in .177.
May I ask which moderator you put on there? I’m looking to add a moderator to mine.
Thank you!
impressive, bro
Yeah, that is one sweet .177!
I can do the same as the first few groups with open sights at 25 yards with my hw45 silver star!
Nice!
Hi, I just purchased Mito and am I ask…
when you increase your pistol power did you Adjust the regulator valve and Hummer spring or only Hummer spring … ?
Just hammer spring.
Hell yeah
Yeah, it's a sexy gun
HELLL YYYEEEAHHH (in my Bugaboo voice )
Hell Yyyeeeahhh!
Which your opinion better and more accurate artemis pp700s-a or reximex rpa?
I have not tried the 700..the RPA is about p[erfect
Looks like a Noto's without the silencer and stock which is nice but I wish the handgrip was more ergonomic.
Yeah it does!
I think it looks like a Huben GK1 with pizzazz
Did you shoot with one eye open or both open? Always shoot with both eyes open for the best accuracy. Nice pistol.
Probably one eye, but I do both eyes open on scopes.
Just bought one, shipping after Sept 17. Please tell me what scope you used when scrambling those eggs? Thanks.
that was probably a HAWKE Airmax: www.tkqlhce.com/click-100005961-12817065?url=https%3A%2F%2Fwww.pyramydair.com%2Fsearch-results-ext%3Fkeyword%3Dhawke%2520airmax
Is this firearm suitable for use in Olympic competitions?
Good question. You would probably want something more expensive....it will work though. I'm reviewing this one next week. www.pyramydair.com/product/air-venturi-comp10-match-pcp-air-pistol?m=4783
Is this allowed for target match competition ?
probably
What's the KE/fpe?
V•V•grainweight ÷ 450240 =KE.
What's the gun weight?
Price?
Velocity at POI?
Thanks!
All in the video...but not the FPE at target. I don't have fancy equipemnt.
Max power you can get from tuning this ? Can i get 20fpe ?
it was at max power.
Numbers please ?
On max reg and max hammer spring?
@@AirgunChannel
Rpa 精准度比huben gk1 好吗
Apakah anda bisa mengirimnya ke indonesia?
krale airguns
What is max power if adjusted?
That was MAX power.
Max hammer spring power but you sure that's the max power of the regular?
If you got the reg to max it won't give you that much of shot counts
We need your help knowing the max fps if we maxed everything no matter what will be the shot count , one mag is enough for me but I need 240m/s at least @@AirgunChannel
@@Nsbsvwhwuiwbsv I think only Huben gk1 will satisfy your required power for pistol.
Looks nice but way too slow good luck on your 5%
Thanks man!
Ck harganya bosq brp rb
60 shots how? 60 round .177 magazine?
60 shots before you need to re-fill the air.
I have a throne g2 from 2021. Build quality was intially good but now it is a nightmare with constant leaks and having to reseal. They aren't easy guns to repair and you can't get parts. Just like Kral, junk and should be avoided. Snowpeak is miles ahead of the turk trash being imported.
Thanks for the info on Reximex quality! Hopefully the keep improving.
I have a Puncher Breaker in 25cal. It's been a pretty good gun. I had to replace the cocking handle. I've not shot it over about 500 rounds. Pyramid Air did send me a new handle along with a replacement hammer if it needs one down the road. I planned on sending it to Troy Hammer sometime in the future. He actually said the rifle is well made but has a few improvements that he does for about $200 bucks to really make it shine.
I have a throne g2 from 2022,done like 5 thousand jsb's through it and still laughing at my mate with his m3. Just a little detail no leaks no probs. Perhaps you got a bad one mate. Had kral mortal x no probs with it either and spread of 4 FPS. Changed it for dynamic express and 700 usd down the road on parts and engineered mods still work in progress...
@@husar5100 I don't even have 500 pellets through it. It mostly sat until I wanted to use it. The Throne is also limited to the plenum size and valve. You won't be shooting heavy slugs to great effect like the impact can. I was hoping the throne would have been the budget impact and that's the reason I wanted one. Can't recommend Reximex until the customer support is there. I emailed them directly and they ignored me. Pyramid does not stock parts as of yet.
@@husar5100 Do you have the weak or or FAC version?
That’s a sexy ass pistol, just saying!!!!
🤘🏻😎🤘🏻
That pistol is too sexy for it's shirt! Seriously.
These laminate grips are so sexy .This wood gives me wood😅
good one!
bro, you gotta test tequilaGUN
He doesn't think it's worth it for a video. I'm guessing he doesn't have many units to sell.
Ñmmmm
Exactly!