Thank you Mr. Zepeda for the video. It was very clear and understandable. You helped me set my sprinkler system correctly and figure out what I was doing wrong and why it was not working. Thank you again!
I'm terrible at following written instructions. So Jorge's video on the Hunter x2 was outstanding. It really helped me. I've seen other video's but Jorge's was the best.
Thank you! New homeowner and the builder breezed through everything and a month later realized only one section of my home was being water, then got confused why my watering system was still going, because I confused the zones with cilycle time. Not looking forward to the high water bill, lesson learned.
Thank you! Just programmed my first irrigation system based on your video! Very helpful step-by-step process. Now have to figure out how to fix my irrigation lines…
Man I have to tell you, I've been trying to figure this damn thing out for about a week now and this video games down is the best one of them all. I understand how it works now. Thank you so much! They better pay you for this one.
Thanks Jorge for the job well done! In my X2 control the water days showing calender 1-31. Would you please explain to me how i could set up this calender?
To stop any zone from watering you can turn dial to “ Station Run Time “ hit the right arrow button until you reach desired zone and press the minus “-“ button until time reaches 0 and the zone will not run .
Thank you! Now I have to find out why my WiFi disconnected…WiFi stays on Amber, press twice, light just goes off. I think something happened after my app updated.
Do they all start at A? Mine is working on C so that means the only system that they did is C? Also there’s a C in the box with the wires. Does this mean I have to set everything for C? And not for A? Please help!!! Thanks!
Any program can be used . I usually only use A simply because it’s the one the controller starts with. If everything is set on program C it won’t affect anything . I’m not sure what the C in the controller is for , if controller is what you mean by box . What brand controller is it ?
Very helpful video. But i’m getting 1 issue. Even though when i point on run position, after few minutes it’s showing off. Do you who how can i fix it? Thanks in advance.
I get confused about the odd and even days, if I already selected the days of the weeks I want to water, what will happen if I choose odd or even days? And can I disabled the odd and even day options so that it only waters on the days I set for the week?
I’m sorry I didn’t change it back on the controller . All you have to do to get back to selected days is hit the back arrow button, it should be one push and your back on the option of days to select . I’ll make a short video just to demonstrate it .
Yes you can use program A to set your even number zones and program it to run even number days on days to water and you can use program B to set odd number zones and odd number days to water .
i have x2 controller at home and the dis play is the word"OFF" and have the picture of an umbrella underneath. What does it mean and can you help me how to fix it pls?
Rain sensor is active. Your rain sensor is either wet, faulty or the splice where the wires connect from the sensor to your controller has lost connection sending a message that the sensor is wet
The On/Bypass should be set to “ On “ if you have a rain sensor unless you want to bypass the sensor and water despite rain. If your X2 is using the wand it really doesn’t matter, the app lets you choose if you want to water when raining or not . Does this help .
Question, how could I find out how many zones I have. It has wire till the 6. I will like to know it I have more than A cause mine goes all the way to C
Sure thing . If you have six wires you only have six zones . Programs A,B,C are not zones but different programs that can be set . For example , if I want my grass to water 3 days a week I’ll set up their watering schedule on program “ A “ for example. Let’s say I’d like my plants to water every other day , then I would program just those zones to water on program “ B “ so I could water both zones without interfering with each other . All 3 programs “ A,B&C “ allow you to have up to 3 different watering cycles for your 6 zones . Let me know if this helps and I can make a small video to further aid you. Thanks for watching .
If you’re using an auxiliary source of water such as pump from a well or Resaca , or if there is a valve located usually by your backflow preventer that is not a zone valve
HOW DO I RESET IT ? The installer has it running A1 -A4, B1-B4 abd C1 to C4 for an hour each!! New house and tried to contact installer but they refuse to return calls!!! I informed the builder of this and NO MANUAL given.
On each program you have to zero them out . If the start times have all 4 start times set on all programs , you’ll have to turn them all off except for the program A- #1 start time .
@@jimwest1967 check your other programs. Turn dial to start time and press the program button and check the start times on the other programs to ensure they’re all off
@ 3:25 into video I talk about program start times . Only the 1st start time should have a time on it. The 2nd,3rd and 4th start time should be off . If there is time , take if additional times and only leave 1st start time . If all other start times are off it may be program B or C that has additional times .
@@jorgezepedajr3677 ok. They r four areas. I turned off a2/3/4 and b1/2/3/4 and c1/2/3/4. I added a single start time on A1 Now in running time. If i state 15 min in a1 it will run 15 min in each area?
@@DAshrafSabry on the “ Program Start Time “ portion , 1-4 is not identifying the number of zones you have or how long they’ll run but how many times your cycle ( all your zones ) will turn on . To change the amount of time for each zone would be on “ Station Run Times” . I’ll try to make a video later, it’s always easier for me to see what I’m working with. Hope this helps
New homeowner and single mom here and I have been struggling with this for sooo long! Thank you so much for this detailed video.
Thank you Mr. Zepeda for the video. It was very clear and understandable. You helped me set my sprinkler system correctly and figure out what I was doing wrong and why it was not working. Thank you again!
This was extremely helpful. Great step by step. You saved me so much time. I really appreciate you.
I'm terrible at following written instructions. So Jorge's video on the Hunter x2 was outstanding. It really helped me. I've seen other video's but Jorge's was the best.
Jorge, what an excellent tutorial! Just what I needed for the newly installed Hunter X2. You're a lifesaver. Well done.
Thank you so much. New home owner.
Thank you! New homeowner and the builder breezed through everything and a month later realized only one section of my home was being water, then got confused why my watering system was still going, because I confused the zones with cilycle time. Not looking forward to the high water bill, lesson learned.
Thank you! Just programmed my first irrigation system based on your video! Very helpful step-by-step process. Now have to figure out how to fix my irrigation lines…
Man I have to tell you, I've been trying to figure this damn thing out for about a week now and this video games down is the best one of them all. I understand how it works now. Thank you so much! They better pay you for this one.
That’s great to hear , appreciate your feedback
Thank you! This was super helpful
This is exactly what I was looking for. Thank you!
so detailed and helpful. Thank you !!!!!!!!!!!!!!!!!
Clear. Concise. Professional. Thanks!
This was a tremendous help - thank you!!
Thank you! Finally able to get it working properly.
Yay! Thank you! You saved me from hearing all the “special words” from my husband!! Our sprinklers work perfectly now!
Glad we could help
Thank you so much. Very clear and very helpful.
Thank you! Best explanation that I have seen!
Helpful, thanks! Straightforward and to the point.
Thank you , if you have any questions just send them over , if I can , I’ll help you out .
Simply explained for most homeowner's systems. One question: the last thing you showed, to just run it now, you pushed the "next" button?
Yes, to manually run it, press and hold the next arrow button until the screen changes to duration and release
100% helpful! Thanks brother!
Thank you! Most informative video!
Very helpful. THANK YOU!!
Jorge, excellent tutorial… I’m having problems with my system continuing to go through cycles until I have to just go cut it off manually !
How many start times do you have? It’s 4 capable but only 1 should be set
My man! Thank you so much!
Major help. Thank you, Sir.
Thanks for checking us out
Good job. I bookmarked the video. Thanks.
Awesome, appreciate it
very helpful thanks
Thank you so much!
Awesome video
Thanks Jorge for the job well done! In my X2 control the water days showing calender 1-31. Would you please explain to me how i could set up this calender?
Thanks so much!!!!
Thank you!
Thank you so much
Omg thank you
Good job. Fire the camera man
I have A B and C, so I am not sure if A is on one side of the house and B on the other, and C is in the back or if A covers them all. Thank you.
Super easy video to follow. How do I set a second watering on the same day for each Zone (e.g. water 15 min at 1 a.m. and 15 min at 3:30 a.m.)?
Add a second start time at your desired time
Nice and quick. Hunter X2 has 6 stations (zones) but you showed how to program 4. How about A5 & A6? thank you.
I have hunter x2 you were very helpful. What do I do when it is winter and I don't want my lawn water? Do I put it to the off position?
Yes
Thanks...much better and straight forward than the company video..
Question...How do you delete a station?
and
To stop any zone from watering you can turn dial to “ Station Run Time “ hit the right arrow button until you reach desired zone and press the minus “-“ button until time reaches 0 and the zone will not run .
Thank you! Now I have to find out why my WiFi disconnected…WiFi stays on Amber, press twice, light just goes off. I think something happened after my app updated.
Jorge puedes hacer un video de como funcionar ei hunter X2. El mismo video de ingles pero en español?
Great. Easy to understand and apply. What about the bypass or on switch? What is that for? Thank you very much for your help 🤙🏼
Rain sensor turn off/on. If you don’t have it doesn’t make sense.
Rain sensor turn on/off.
Do they all start at A? Mine is working on C so that means the only system that they did is C? Also there’s a C in the box with the wires. Does this mean I have to set everything for C? And not for A? Please help!!! Thanks!
Any program can be used . I usually only use A simply because it’s the one the controller starts with. If everything is set on program C it won’t affect anything . I’m not sure what the C in the controller is for , if controller is what you mean by box . What brand controller is it ?
Very helpful video. But i’m getting 1 issue. Even though when i point on run position, after few minutes it’s showing off. Do you who how can i fix it?
Thanks in advance.
Could be a rain sensor issue . There is a reset button you can press when you remove the bottom cover . Try that .
I get confused about the odd and even days, if I already selected the days of the weeks I want to water, what will happen if I choose odd or even days? And can I disabled the odd and even day options so that it only waters on the days I set for the week?
I’m sorry I didn’t change it back on the controller . All you have to do to get back to selected days is hit the back arrow button, it should be one push and your back on the option of days to select . I’ll make a short video just to demonstrate it .
Along the top we have a blinking 2 and then a 0 can’t figure out what it is? Please advise!
I’m not 100% sure. Nothings coming to mind. I’ll see what I can get to express that on mine and get back to you .
@@jorgezepedajr3677 we may just do a factory reset
What if I had my 4 start time on at the same time? Would that cause a high water bill?
Yes. The controller would run your entire cycle 4x one right after the other .
Hey! Is there a way I can have my odd numbered zones run on odd numbered days and my even numbered zones run on even days?
Yes you can use program A to set your even number zones and program it to run even number days on days to water and you can use program B to set odd number zones and odd number days to water .
@@jorgezepedajr3677 I actually realized that and was in the process of programming it. Lol. Thanks for the quick response!
Can you please do a video on wifi connectivity?
What exactly is your issue ?
i have x2 controller at home and the dis play is the word"OFF" and have the picture of an umbrella underneath. What does it mean and can you help me how to fix it pls?
Rain sensor is active. Your rain sensor is either wet, faulty or the splice where the wires connect from the sensor to your controller has lost connection sending a message that the sensor is wet
I'm confused about the On/bypass switch. What should it be set too?
The On/Bypass should be set to “ On “ if you have a rain sensor unless you want to bypass the sensor and water despite rain. If your X2 is using the wand it really doesn’t matter, the app lets you choose if you want to water when raining or not . Does this help .
What should the On/Bypass switch be set to?
Depending on if you have a rain sensor , “ On “ would activate your rain sensor and off would bypass .
Question, how could I find out how many zones I have. It has wire till the 6. I will like to know it I have more than A cause mine goes all the way to C
Sure thing . If you have six wires you only have six zones . Programs A,B,C are not zones but different programs that can be set . For example , if I want my grass to water 3 days a week I’ll set up their watering schedule on program “ A “ for example. Let’s say I’d like my plants to water every other day , then I would program just those zones to water on program “ B “ so I could water both zones without interfering with each other . All 3 programs “ A,B&C “ allow you to have up to 3 different watering cycles for your 6 zones . Let me know if this helps and I can make a small video to further aid you. Thanks for watching .
Can you please make this video?
How do you know if you use a master valve?
If you’re using an auxiliary source of water such as pump from a well or Resaca , or if there is a valve located usually by your backflow preventer that is not a zone valve
HOW DO I RESET IT ? The installer has it running A1 -A4, B1-B4 abd C1 to C4 for an hour each!! New house and tried to contact installer but they refuse to return calls!!! I informed the builder of this and NO MANUAL given.
On each program you have to zero them out . If the start times have all 4 start times set on all programs , you’ll have to turn them all off except for the program A- #1 start time .
But there are different zones for my sprinkler system. Will A1 run all 4 zones?
Do I keep it on On? Or Bypass??
Your call. If you want your system to shut off during rain storms , on . If you want your lawn to get irrigated, whether it rained or not , bypass.
What is A B and C ?
Different programs in case you want separate watering time and days . Such as maybe front yard watering MWF and back yard watering TTF
I cant figure out how to turn off the second start time
Turn dial to start times and press the right arrow key to move to the 2nd start time . Once there , the “ Off” option is after midnight before 1am
@@jorgezepedajr3677 ive figured them out for the most part. I only have one start time now yet zone 4 still starts up in the middle of the day.
@@jimwest1967 check your other programs. Turn dial to start time and press the program button and check the start times on the other programs to ensure they’re all off
ON or BYPASS ? What should it be set at?
If you have a working rain sensor select active. If no working sensor bypass.
I did all the steps. It runs 3 times by itself. First one is the one i programmed. Then it repeats all programs 2 times
@ 3:25 into video I talk about program start times . Only the 1st start time should have a time on it. The 2nd,3rd and 4th start time should be off . If there is time , take if additional times and only leave 1st start time . If all other start times are off it may be program B or C that has additional times .
@@jorgezepedajr3677 ok. They r four areas. I turned off a2/3/4 and b1/2/3/4 and c1/2/3/4. I added a single start time on A1
Now in running time. If i state 15 min in a1 it will run 15 min in each area?
@@DAshrafSabry on the “ Program Start Time “ portion , 1-4 is not identifying the number of zones you have or how long they’ll run but how many times your cycle ( all your zones ) will turn on . To change the amount of time for each zone would be on “ Station Run Times” . I’ll try to make a video later, it’s always easier for me to see what I’m working with. Hope this helps
Step 1: Throw out Hunter unit.
Step 2: Buy and install a Rachio sprinkler controller and go about your day.
Outdated controller garbage
What do you use ?