I have the same problem but unable to find a solution to this issue. Works fine on the cold side but cuts off and machine turns off on the hot side. Could be an issue with auto thermal cut off????
Hi, my mini me doesn't give hot water. I explain better. The pump works and sends water directly in the cold tube and in the input of the heter (the one down). The heater works because it becomes hot, but no water from the exit (its iron tube up). I've tried several descaling but still not hot water. Can you help me? Thanks in advance.
Just follow this video how to repair. It is exactly the same issue. It is a small rubber ball with the spring that was stuck due to dried up because of not using a quiet a while.
@@gudvooy2 First, thanks for the answer. I have already seen your video days ago before trying to fix my Mini Me and I've already done what you do about the rubber and the spring. I thought I fixed it because the pump push the cold water that exit from the head. I'll try to it again and better. Could it be the thermal fuse? Thanks again.
Check it anyway. But as you have said hot water is working. I think you need to replace the rubber. In time it will depleted and it always the cause of clogging.
@@gudvooy2 I have checked it again, the rubber was inside the spring, correctly I think. The rubber seems to be in good conditions. The problem could be elsewhere. It seems like the heater is clogged in the exit way. Unless it's an electronic problem. I'm loosing hope. Anyway, thanks again.
Have this one... Now going trouble.. The prestart from red blinking to green very long... After ready.. Swipe the lever to hot.. The lever not locking....so i hold it.. If i hold the water flow normally.... But the green power after i few second diming to off..then the machine stop working... What the solution?
I think I have this problem with an older model I got from a friend and this might be the fix. Very helpful video 👍🏻
Have the same problem. Waiting for Torx10 tool. Then I’ll try to do the same fix
Nice job
mine auto stop on hot water, it just spill little water and auto stop (lever going to idle position) and machine went off
Try to locate where the water is leaking out.
I have the same problem but unable to find a solution to this issue. Works fine on the cold side but cuts off and machine turns off on the hot side. Could be an issue with auto thermal cut off????
@sahn911 Maybe
Hi, my mini me doesn't give hot water. I explain better. The pump works and sends water directly in the cold tube and in the input of the heter (the one down). The heater works because it becomes hot, but no water from the exit (its iron tube up). I've tried several descaling but still not hot water. Can you help me? Thanks in advance.
Just follow this video how to repair. It is exactly the same issue.
It is a small rubber ball with the spring that was stuck due to dried up because of not using a quiet a while.
@@gudvooy2 First, thanks for the answer. I have already seen your video days ago before trying to fix my Mini Me and I've already done what you do about the rubber and the spring. I thought I fixed it because the pump push the cold water that exit from the head. I'll try to it again and better. Could it be the thermal fuse? Thanks again.
Check it anyway. But as you have said hot water is working. I think you need to replace the rubber. In time it will depleted and it always the cause of clogging.
@@gudvooy2 OK, I'll try. Thank you very much for you precious video.
@@gudvooy2 I have checked it again, the rubber was inside the spring, correctly I think. The rubber seems to be in good conditions. The problem could be elsewhere. It seems like the heater is clogged in the exit way. Unless it's an electronic problem. I'm loosing hope. Anyway, thanks again.
Have this one... Now going trouble.. The prestart from red blinking to green very long... After ready.. Swipe the lever to hot.. The lever not locking....so i hold it.. If i hold the water flow normally.... But the green power after i few second diming to off..then the machine stop working... What the solution?
There might a problem with the sensors or even the lock lever.
👍👋 Thank you!!
Perfectt🎉
Mine works with cold water but not with hot water...
Same thing here .. any solution ?
Just do things I did in the video.