How to Replace Starter 2004-2010 BMW X3
HTML-код
- Опубликовано: 5 окт 2024
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AES...
This video shows you how to install a starter on your 2004-2010 BMW X3. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ouN/1AX...
• Pocket Screwdriver
• 10mm Wrench 1aau.to/ofS/1AX...
• 10mm Socket 1aau.to/orr/1AX...
• 11mm Socket 1aau.to/ouE/1AX...
• 13mm Socket 1aau.to/ouE/1AX...
• Torque Angle Gauge
• Trim Tool Set 1aau.to/ogx/1AX...
• E14 Socket
• E16 Inverted Torx Socket
• E7 Inverted Torx Socket
• T25 Socket 1aau.to/odZ/1AX...
• T30 Socket
• Ratchet 1aau.to/own/1AX...
• Socket Extensions 1aau.to/ouE/1AX...
• Torque Wrench 1aau.to/onH/1AX...
• Brake Parts Cleaner
• Cloth Rags 1aau.to/odk/1AX...
• 5mm Hex Socket
• Pick 1aau.to/oeg/1AX...
Subscribe: / @trq
Check out our playlist:
BMW X3 2004-10 1st Gen E83: • BMW X3 2004-10 1st Ge...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thanks for this video and this is my first and last BMW
Very well done. Got it done in about 3.5 hours. Would have been much longer without your video. Thanks.
Video title is misleading, you are replacing a starter on an N52 engine this engine package was not available on these pre 2007, anything older than has an m54 engine in it that’s a totally different engine to work on.
The N52. An engine by German engine designers to mock British and American mechanics working on them 15 years later.
Dam all that just to get to the starter
Took 5 hrs but I did it also. Thanks HEAPS for the amazing vid.
Now that is a lot of work I pray its not my starter. This looks like a ton of work and you may want to replace other wear items while your in there.
My 2009 X3 3.0 started kind of weird like a Slow crank but battery is only 3 months old. Car almost did not start the next time I went to start it just a click. Tried to jump start and no luck. I knew it was not the battery.
I wonder if Starter or some kind of fuse or relay that someone else mentioned could be problem.
Anyway thanks for the video nice to see whats involved
Thank you so much for the video great help to get the job done
Very helpful thank you man!
The starter location on the n52 engine is a sick joke 😂
Ill be diving in this week
Thankyou for the detailed video 👍
Edit: this video ONLY pertains to the N52 engine which was found in 2007 and later models. An older BMW X3 is a different process where you can get to the starter form underneath the car
ONE OF THE BEST VIDEOS ON HOW TO REPLACE A STARTER ON A BMW. THANKS FOR SHARING THE KNOWLEDGE. NOW I'M A SUBCRIBER OF YOUR CHANEL.
That's alot lord have mercy And that starter not cheap
This is for 2007-2010 vehicles, not 2004-2006, as the earlier models have the M54 engine and not the N52.
Thank you for the great detailed video
Wait... I did my 2005 X3 with a 5 speed transmission years ago. I remember doing this from underneath the vehicle and reaching around the transmission and being able to access all the bolts and swapping it out this way.
Much Much Much less involved. I just got a neck cramp. I used some rachet extensions/adapters. I am not sure how much different automatic transmissions are (my guess is that this video depicts an automatic trans).
Hey TRQ, thanks so much for the amazing info and steps you provide. I have a BMW X3 2008 and have trouble locating the starter relay. Does it even have a starter relay? Getting mixed information in the forums online. Don't have the full fuse info on the car. Just the ones in the glove box. I checked there's power going to starter and signal also when key is turned. Still no crank no click. Does that mean starter is bad?
Did you find the issue ?
Thanks for the video, very helpful!!
Annnd, similar to other repair videos for other cars I’ve worked on, my 2005 X3 3.0 is not the same as in this vid.
Craftsman 7/16 ratchet wrench gets the job done on those starter bolts
Thank ye for this video
The best video thanks 🙏
I removed everything/manifold to see the mechanic (6 years ago) had broken the bolt head (right one) on one of bolts for the starter… any advice?
Did the same... pair of vise grips then aim the down to the fender zip tie them shit and your day is done my friend and better then the shitty bolts that break
Any special technique to tightening the back starter bolt? Looks like a tight area that might be hard getting a torque wrench back there. Curious because I plan on doing this myself soon and I noticed it wasn’t recorded in this video. Thank you 🙏🏽
Do you have any advice to offer concerning the back bolt since you completed the job?
7/16 ratchet wrench
😮😮Not many videos of going from the bottom
Please make a video on a bmw x3 2011 3.0
+Humberto Alvarado We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Where tf is the foot pounds gauge
I did it from underneath in a X3 2006 automatic E83 type.
It is possible but man, I still seeing nightmares remembering when I loosened those f*ing screws, I wish the BMW engineers a long life full of flimsy toilet paper…
David