Nu Gundam and Strike Noir...my two favorite mobile suits ever. Excellent work. Interesting decals as well. Obviously not standard...but still works. :)
Hey man just wanted to say thank u for this video. U inspired me to make my first full painted custom gunpla. I really like you paint color scheme beautiful! I hope u post more videos. Subscribed!!
Major of the white i used Mr Hobby White FS17875. The light grey is just adding a little bit of grey to that white. The light brown is mixture of white, yellow and grey. Hope it helps!
Thankss!!!! It took about 3weeks because of the recording process and all. But if i only focusing on the customing, it will only take about a week ☺️☺️
Is Mr. Color GX 114 clear safe to paint over enamel? Any advice you can give me because I know usually you’re not suppose to paint lacquer over acrylics or enamel.
I think its safe to use this topcoat on top of acrylics and enamels. If you still insure about this, you can try it on a plastic spoon first to see if there is any reaction with the paints ☺️
@@EAGunpla aik orang malaysia rupenye aku ingat channel luar haha.. jarang ade orang malay yg sanggup untuk bongkar pasang gunpla.. dulu aku penah buat time mase kecik.. tapi bukan gundam.. aku punye Zoids fuh minat gile aku..
Beautiful video, nice build. But I would love more zoom out scenes while you do the progress. It’s really hard to see how you hand painting parts and scribbling panel lines. I have to get my eyes really focus to where you painted because the parts are too small, the shot angle is too far and too general
Wow!! VERY IMPRESSIVE WORK!!! This video has definitely inspired me to take my Gundam hobby to a whole new level! If you can do this then so can I.. Thank you!
@@EAGunpla thank u for replying....how about the metallic parts like the inner frame? Did u spray flat top coat over it as well? Or you dismantle it and flat top coat the parts by parts
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Love your choice of more muted colours, makes it looks even more military-esque! Thanks for sharing your work, it’s a joy to watch as always.
So I'm on the 4th video from browsing your channel....and you haven't missed yet....YOU'RE A LEGEND DUDE!!! 4 FOR 4!!!!
my god bro lawa gila. tak puas tengok. Berbaloi segala process nak jadi mcm ni. memang puas hati. terbaik !
Wow, your hands are incredibly steady. Great work, awesome choice of color separation.
Thank you...!! I think everyone can have a steady hands with a lot of practice! 😁
please make video about room tour & equipment you used in video. Also where to buy those tool.
Nu Gundam and Strike Noir...my two favorite mobile suits ever. Excellent work. Interesting decals as well. Obviously not standard...but still works. :)
Hey man just wanted to say thank u for this video. U inspired me to make my first full painted custom gunpla. I really like you paint color scheme beautiful! I hope u post more videos. Subscribed!!
Thank you so much..!!! Really appreciated it!! New custom paint video coming this week! Stay tuned! 😁😁
WOW... now those are some seriously gorgeous colors and details XO
thank you so much!
You put more effort into gunpla than I have the time to think of doing! Keep up the Godly work so we can stare in awe!
Great work but I want to know where the fin funnels are. I'm curious to see what it looks like with those
Teleported to here from Gunpla FB group. Wonderful build! Great work! So pleasant to watch!
Thank you so muchhh!!! Hope you will like my next custom video! HG Revive RX-78 2!
nice vid i would like to know what you used after the tamiya panel liner. that whit brush thing
its called Gaianotes Finish Master :D
@@EAGunpla thank you very much
7:44. what is the color code for these joints. the copper like color. What brand
Got some real Thunderbolt vibes from that final paintjob, lad. Wasn't a fan of the stealthed out chest til i sorta figured that, but well done!
I don’t know how many times I’ve watched this build man. By the way do u thin your topcoats with the same ratio as how you thin ur primers and paints?
Nice, could you please let me know which red are you using
id love to know what paint that inner frame was made from cause it looks badass
super clean and sharp!!
may I ask, what is that bright metal looking paint for the frame?
Thank you!! Really appreciated it! The paints for the frame i used from Skull Color Malaysia. Steel and Titanium Gold 😁
Nice build! What is that tool you use to clean up the panel lines?
late reply but you can google gundam panel lining eraser, basically it's just an eraser
nice work . anyway what tool do you use to clean panel lines? thx
What tool are you using to clean up the excess panel liner? @15:34
Very cool, congratulations
Can you please tell me what colour did you use to paint the v fundamental if you remember😣😣😣
Among your works. I see that the RG nu gundam requires less recoloring. Meaning the base design of RG Nu is that Good
bro, nice video man. kau guna water decal mana eh? setakat aku tahu, RG Nu Gundam takde water decal.
Brah this is bad ass!
Like the editing and music.
Top notch!
👏👏👏
Thank you so much for the compliments!! I will work harder for better gunpla content! 🙇🏻♂️
@@EAGunpla Seriously thank you!! Keep up the awesome work and look forward to more content. For now, I will watch the rest of your art work. 👍
what is that spongy pen you use to clean your panel lining?
Awesome job Ezzat Aziz! hehe
Thank you so muchhh!!! 🤩🤩 hope you will like my next custom build!
@@EAGunpla yes sure hehe cant wait for it!
Very great work!! I will follow your works ;)
I am also wondering about the different of white color you use?
Major of the white i used Mr Hobby White FS17875. The light grey is just adding a little bit of grey to that white. The light brown is mixture of white, yellow and grey. Hope it helps!
mantap bro...hope ada lagi video2 custom gunpla.
Tq bro!! Next saya akan custom HG Revive RX-78 2! Back to basic! Hehe
@@EAGunpla wah.. granddaddy custom...nice2..tak sabar nak lihat.
Can i ask for the colors guide that you used here?
Bro mana nak beli mat kaler hitam tu? Ada link tak? Great vid keep it up 👍🏻
Love the process! Very sharp and detailed.. How long the process from start?
Thankss!!!! It took about 3weeks because of the recording process and all. But if i only focusing on the customing, it will only take about a week ☺️☺️
@@EAGunpla Keep up the good work! =)
what paint did you use for the inner frame? a really dope build btw! much love from Indonesia 😁
Wow ,It COOL !!! I Like This 😆
Did you only paint on the accent colors? Or did you paint the entire model piece by piece?
I paint the entire model piece by piece. Every parts is painted 😁
Is Mr. Color GX 114 clear safe to paint over enamel? Any advice you can give me because I know usually you’re not suppose to paint lacquer over acrylics or enamel.
I think its safe to use this topcoat on top of acrylics and enamels. If you still insure about this, you can try it on a plastic spoon first to see if there is any reaction with the paints ☺️
Keep it up EA! Hilang footage tu pengajaran. hehehe
Thank you DTV!! Itu la lepasni setiap kali nak transfer file mmg kene buat folder baru.
@@EAGunpla aik orang malaysia rupenye aku ingat channel luar haha.. jarang ade orang malay yg sanggup untuk bongkar pasang gunpla.. dulu aku penah buat time mase kecik.. tapi bukan gundam.. aku punye Zoids fuh minat gile aku..
Wow. Awesome build. :O
Superb nice bro, more of this please
Thank you soo muchh!! Next custom is gonna be HG Revive RX-78 2! 🤩
Fuhhhh.. nak buat gak lah. Pinjam spray booth. heheheh
Bolehhh2 hahahah
Amazing work.
Thank you so much!!
Really nice paint choice! 👍🏻
Thank you so much sir! 🤩
What is the color you use for dark blue part? I saw mixture of different dark blue.
I mixed cobalt blue, dark grey and black :D
@@EAGunpla so the light version of dark blue is adding more dark grey?
Beautiful video, nice build. But I would love more zoom out scenes while you do the progress. It’s really hard to see how you hand painting parts and scribbling panel lines. I have to get my eyes really focus to where you painted because the parts are too small, the shot angle is too far and too general
what gray color?
Wow!! VERY IMPRESSIVE WORK!!!
This video has definitely inspired me to take my Gundam hobby to a whole new level!
If you can do this then so can I..
Thank you!
thank you so much!! im so happy that the video inspired you! 🙇🏻🙇🏻
Hi did u apply gloss or flat topcoat for it??
i applied flat top coat for the finishing :D
@@EAGunpla thank u for replying....how about the metallic parts like the inner frame? Did u spray flat top coat over it as well? Or you dismantle it and flat top coat the parts by parts
Lawa2. 👍🏻👍🏻👍🏻
Thank youu!! 🤩
Patutkah sya beli airbrush ? 🤔🤔
nice one! yang top coat tu mixture dia 1:1.5 ke?
Haah bro ratio 1:1.5 tapi kalau bro nk buat 1:2 pun boleh 😁
New subscriber here !
#GBM ❤
Thank you so much broo!!!
dude can I copy the color？
Sure man, go ahead!
@@EAGunpla thanks！
Learn from the basics and customize
Da best result is now finished
(Tap read more)
IIII LAAAAAAAAB IIIIIIIIITTT (I LOVE IT )