Wash & Chat With Kelly Harris - Edges and Boxes
HTML-код
- Опубликовано: 15 сен 2024
- Wash & Chat With Kelly Harris - Edges and Boxes
Episode 2, and this is the first "proper" video with Kelly.
We talk about the difference between a correction wash and a maintenance wash. We also learn a lot about boxes and edges.
----------------
Chapters:
00:00 Start
----------------
Social Media:
Patreon - / detailingworld
Forum - www.detailingwo...
Facebook - / detailingworld
Instagram - / detailingworldofficial
Mat's Instagram - / randomlyset
Twitter - / detailingworld
----------------
Amazon Links
Equipment
SPTA Cordless Mini Polisher - amzn.to/3hqylam
Pressure Washer (Kranzle 2160TS) - amzn.to/3bpWXLn
Quick Release Connections - amzn.to/2vREA1Z
Hozelock Hose - amzn.to/2wx6h03
Kirkland Microfibres - amzn.to/2GwGIzR
Sketchers Waterproof(ish) Boots - amzn.to/2JB51zt
Video Gear
Camera - Panasonic LUMIX DMC-G7MEB-K - amzn.to/3nZvxRK
Prime Lens - Panasonic LUMIX H-H025E-K 25 mm - amzn.to/39WlDLJ
Gimbal - DJI Ronin-SC - amzn.to/3iBgLQ3
Wireless Mic - Rode Filmmaker Kit - amzn.to/3palquS
Shotgun Mic - Rode VideoMic Pro+ - amzn.to/2KByVEN
GoPro - GoPro Hero 4 Black - amzn.to/2XYT8Y8
GoPro Gimbal - Feiyu Tech G4 - amzn.to/2Mg63SI
Main Tripod - GEEKOTO 79" Light Aluminium Tripod - amzn.to/2Y1gE6R
Slider - Neewer 80cm Camera Slider - amzn.to/3p1dtbb
Video Light - Neewer SL-60W LED Video Light - amzn.to/3p5eVJK
Drone - DJI Mavic Pro - amzn.to/3p4WzZa
#kds #lakecountrymanufacturing #thedetailingspace #detailingworld #randomlyset #vlog #detailingvlog
Brilliant. I wish you three guys would do Top Gear.
every day is a school day when you watch kelly, great video and looking forward to the rest of the series.
Really good series of videos which every detailer should watch. A couple of people have mentioned about rinseless washes and I will too - they are rinseless, not waterless and the way John describes how he uses them is the way I do too. I would say that their versatility doesn't end there. Kelly mentions using soap in the rinse bucket - a drip of rinseless wash is even more effective! It also pulls any dirt or sediment out of the solution and to the bottom much quicker and is more lubricated than soap so on maintenance washes is a safer option for that purpose.
Using it in the initial panel wipe off, especially on very soft paints is also magic.
👍
Fantastic video guys just to show Kelly really is the Boss of wash 👌🏻👌🏻
Cheers fella 👍
Oh dear oh dear... dodo juice just launched them mitts have they??? 🤣
They are the Yeti hands I used in a zero bucket method video TWO YEARS AGO! They are aliexpress specials, identical...
This is great content, well done capturing all the thoughtful ideas Kelly has adapted over the years of work. What would we do without you tube.
Indeed 👍
Looks like a good series, looking forward to the rest!
Thanks 👍
I like the multi mitt method,no need to rinse and no chance of getting back on the car 😀
I just spray on fallout remover and agitate it with a wash mitt following the contact wash. This method only uses a few sprays per panel but id advise to get a more foamy fallout remover so that you can work it around easier
Thanks for sharing!
Great video
Thanks 👍
I see you everywhere Mike lol.
@@fireball7671 I try
I really like Kelly. Cool guy with a wealth of knowledge.
awesome job folks! Joel from Ohio.
Thanks Joel 👍
I've used ONR for 20 years and 2021 was my first year without soaps. It's best to soak the car with ONR, wait a short time then rinse it with low pressure or high from a distance, reapply it then wash the whole car then dry or as I go. Using many mitts or towels. A car that is covered in mud is where snow foam is quite useful as it is for arches and wheels but that's it IMHO. ONR encapsulates and emulsifies, soap only emulsifies and is a poor surface lubricant in comparison. Also soap leaves a film behind that reduces surface clarity. If using one mitt or many with soap or ONR, high pressure rinse the mitt clean after each panel or two or use several mitts which is faster and easier. Don't have a rinse bucket or even a wash bucket with soap washing, use a pump pack or foamer with a higher concentration of shampoo, it saves your back and works better. Kelly is spot on about the gaps, their the worst and if they and the glass aren't 100% clean, the car won't look detailed. I swear the industry hasn't gone past two bucket washing because buckets are a high profit item despite the existance of more ergonomic, more efficient and safer ways to wash without them
What a great learning experience watching this video. Never really thought about edges the way Kelly describes here, but after watching, will never forget to do a thorough job on all the edges again! Can't wait for the new CarPro Descale shampoo which is an acidic shampoo which is supposed to revive coatings by loosening and washing away some of the contamination caused by limescale buildup and other impurities released by an acidic shampoo. Reset and Descale will be the "one-two punch" so to speak of decontamination washes.
3 am Saturday morning really great work team 👍👍
Cheers 🤣👍
Great to watch some different ways but I'm with you I find it hard using the MIT on the hand but I like the idea of using 2 different mits one for the edges. Look forward to the follow up videos
the wash mitt section is great, kelly with two on....hahahaha
Hello Mat,what a interesting video, the iron fallout remover works quick on the wheels, different ways of detailing a car.
Very intuitive video man, well done, looking forward to the next in the series. A lot of things make sense, but I'm one for trying to prove the theories, the shampoo in the rinse bucket is an odd one, as the sudds somewhat contain the dirt in some ways, surely when rinsing, you should be using clean as possible water?
Jet nozzle on a foam lance, absolutely makes sense now! Like you, I never knew why it was on it!!
No rinse, although only used it once to wash a car for a show, is not designed as a "waterless" wash, but instead a "rinsless" wash, again used same techniques in spraying the car, then using about 6 cheap noodles to wash it then.
Great vid, looking forward to the next ones 👊
Brilliant video and some great tips.
Very interesting, a real eye opener.
Reminds me of my Dad no nonsense straight to the point bloke.
Good stuff, you should check out Lepsons while you're there😀
They were working on a couple of sets of wheels for him.... One for a BMW, and also a wheel for a Porsche that you'll see in upcoming videos 👍
Do they use labocosmetica products like purifica and primus? Great to see it
Mr. Professional, ONR is a rinseless wash, not a waterless wash.
👍
TBF people used to call it a waterless wash many years ago.
Hi Matt, are you by any chance an administrator for the forum? I'm sorry to ask but I've got a problem with my account and I'm getting no response at all through the messaging system and I've got no other way of contacting anyone who can help.
I'm not unfortunately, sorry. I know ownership has changed, but not sure on an email address to contact... I'd guess at admin@detailingworld.co.uk
@@TheDetailingSpace Okay, thanks. I'll give that a try.
Good video bro 🦁
Cheers 👍
Learnt a trick there about the adjustable foam jet into the nooks and crannies.... and into the arches...
waterless washes........... not for me......... its not washing or cleaning to me
doing the edges with the mit/pad... seems so blindingly obvious but why have i not thought of that?
i do like Kelly, he talks a lot of sense, and makes you question things and say WHY?,
that little trick about a dash of shampoo in the rinse bucket.... genius and makes you ask, why didnt i think of that?
Definitely. Those are pretty much all the things I took away from him too
@@TheDetailingSpace looking forward to the next video Matt...
I've even saved them onto my detailing playlist for future reference
👍 Make sure you share them all over the Internet. Especially on reddit 😉👌
If I bin off the missus and kids, do you think Kelly would give me a job?
🤣
1st