Introducing XRS74YG - CAA AK Rail System

The XRS74YG Rail System is a fully-featured for modern AK rifles. The XRS74YG Rail System throws aside the traditional AK forearm and offers an extended choice giving better shooting positions, designed with aluminum chassis for strength and quality. This handguard gives Picatinny and other mounting solutions.
Review and assembly explanation:
CAA XRS74 YG AK-74 Aluminum Picatinny Rail.
* Allows removal of dust cover.
* Keeps 0 perfectly.
* Keymod rails

[@TheLostKoz]

I find the cyborg technology far more impressive than the rail.

[@jupiterjunk]

Just installed this on a PSAK-47 GF5 .
Dremmel, files, and sandpaper REQUIRED !!!
Well worth the time to get it installed.

[@oneounceslugAPEX]

Did you just have to cut the sling loop on the left side rail? If so, anything else?

[@jupiterjunk]

@@oneounceslugAPEX
No, the sling loop is fine.
I had to file back the front of the lower rail 1/8th of an inch.
I had to re-contour the top rail just a small amount, where it contacts the receiver.
After that, it was awesome.
No power tools, just hand file to fit.
Took a couple of hours.

[@oneounceslugAPEX]

@@jupiterjunk awesome! Thank you for the response!

[@oneounceslugAPEX]

@Kev looks like I'm buying a dremel lol. My gf3 is having a hell of a time accepting this thing

[@jupiterjunk]

@@oneounceslugAPEX
One thing I forgot...
The front retainer sits on a raised lip, you'll see it when you look at the rail straight on. That lip does need to be filed as well.
.
Remove the screws from the front and rear retainers. CAUTION there is a spring underneath.
Use a Sharpy to coat an area, on the rail and try fitting it to the rifle. You'll see where the Sharpie is removed. Start there.
.
Go slowly with the Dremel, and use as fine a grit as you can. REMEMBER: You can remove material, but you can't add it back.
.

[@alejandroyanez3964]

I pay $256 dollars and it is a very good product all aluminum very well made 👌 love it.

[@dubvc1]

How's it holding up?

[@jimmyjam49]

Will this fit a century arms vska?

[@alejandroyanez3964]

I did install it on my arsenal ak m sam r did work I did some modifications and it took me more than thought but did work 😅

[@reaccionasimetrica]

Tell me more about it, i would like to install it on my Arsenal as well.

[@justinhoward6135]

interesting , kinda like it

[@ChiefBowels]

This guy is not human

[@bcajilly784]

Will this fit on a Wasr-10?

[@jonelbondyingnuezca742]

Where is the charging handle?

[@travistucker1033]

It was ground off and a left side chargeing handle was installed.

[@jarendcaro6592]

Is this a good to go on a RAK47?

[@crash6669]

Will this work on a Maadi AK47?

[@Milspec_101]

Will it fit the M70AB2

[@glent5659]

Looks too good to be true.

[@GTMGunTotinMinnesotan]

Is this going to fit yugo 47s?

[@israeldefensestoretactical8358]

Apologies for our slow follow up. The answer is that it will not fit. Sorry. We are available for any additional questions at [e-mail]

[@ProUberMrFantastic]

Will this work for WBP AK JACK tactical ?