Great video. Thank you for testing these configurations. I would love to know how well the X53 performs with an NF-A9x25 to see how it compares to the performance of the NF-A9x14.
Teseted Noctua NF A12x25 PWM for AXP90 instead of stock fan - works as a song, very quiet Bear in mind though that the proximity to the case wall grate can make the noise loud - had to switch to x47 due to it Great video
I observed the same thing, those stock fans move a lot of air but they're loader as a trade off. Maybe a normalized test would yield better results for the Noctua's
I used an arctic p12 max fan and could sustain higher clocks and cinebench score. You could try to bench mark that too pure performance although a bit louder than noctua
Intresting that the 92mm noctua beat the 120mm variants in cooling! I wonder if it is the way the fans where placed or that there was a bit a presure loss due to the frame not sealing on the heatsink anymore?
i think part of the reason is metal bracket is blocking some of the pathway of the air to move. the other point would be it would be intresting to know how long the clock speeds stayed stable temperature isnt everything it could be the cpu is using the extra cooling capacity to stay at a higher clock speed for longer
Mission incomplete: 1. Missing results for same temp, but different dB(A). 2. Missing 140x15mm that would cool RAM @ lower RPM (arctic, thermalright, silverstone, no noctua)
If you only look at the CPU cooling performance, the bundle fan is the best, and you want to reduce the quietness of the cooler and the ambient temperature of the motherboard, 120mm is the best.
Let me aks u one more question please. I built a louqe ghost with ryzen 7 5800x3d. What cooling solution u suggest?An id cooling is 47s is do the job?Or swap the ventilator?Or anything else? Thx for ur asnwer@@DalraeMyo
I understand that the IS47S has a worse cooling performance than I thought. For LOQUE GHOST S1, the maximum mountable CPU cooler is 66 mm high. Therefore, the most recommended CPU cooler is the NOCTUA NH-L12 Ghost Edition.@@capybara_time
![Diggy Graves - Red Vineyard [Official Lyric Video]](http://i.ytimg.com/vi/8Ro085T0mnQ/mqdefault.jpg)
Amazing results!! Thanks for your great works!!
Nice test as always! I love my AXP90-X53 BLACK (with a NF-A9x14 HS) using it to cool a ryzen 5700X on a fractal design terra with no problem
Great video. Thank you for testing these configurations. I would love to know how well the X53 performs with an NF-A9x25 to see how it compares to the performance of the NF-A9x14.
If I have a chance, I will proceed with the test.
@@DalraeMyo Great! I look forward to seeing the results.
Большое спасибо за обзор, и за музыку!
Teseted Noctua NF A12x25 PWM for AXP90 instead of stock fan - works as a song, very quiet
Bear in mind though that the proximity to the case wall grate can make the noise loud - had to switch to x47 due to it
Great video
best comparison ever
I observed the same thing, those stock fans move a lot of air but they're loader as a trade off. Maybe a normalized test would yield better results for the Noctua's
I'm amazed the stock fan performed the best. Goes to show that bigger isn't always better!
stock fan had slightly better CPU temp but significantly worse VRM temps
RAM temps were not measured, but i am certain it were better with 120x25 too
The only thing this test missed was a 9025 fan, which would be the go to for increaded cooling
awesome video and comparison. can you provide any details where you got the adapter from?
great work, thanks!
Hey, i'm planing to use this cpu cooler, but why not try with the nf-a9?, the no Slim versión of the 92mm noctua fan?
Yep..... Thermalright do make quality product...... and your video was 👍👍
I used an arctic p12 max fan and could sustain higher clocks and cinebench score. You could try to bench mark that too pure performance although a bit louder than noctua
so the stock fan is the best but with a 5db higher noise
if you don't want to tune your fan curves and just want the lowest temps... yes. but that's quite a specific scenario.
Hi is the fan set to intake (blowing air onto the heatsink) or exhaust ?
ooo I like when you saw this cooler you thought to test what I was thinking :) Subscribed!
Thanks 🎉❤
Intresting that the 92mm noctua beat the 120mm variants in cooling! I wonder if it is the way the fans where placed or that there was a bit a presure loss due to the frame not sealing on the heatsink anymore?
i think part of the reason is metal bracket is blocking some of the pathway of the air to move. the other point would be it would be intresting to know how long the clock speeds stayed stable temperature isnt everything it could be the cpu is using the extra cooling capacity to stay at a higher clock speed for longer
@@jamv2122 there’s another version of those adapter that doesn’t block the fins that would been good to see as well
@@humilicious you may be able to get round the lose of air using rubber gaskets between the fan and the bracket.
번들이 시끄러운거 빼고는 최고군요 0ㅁ0;;;
i wonder what would happen if NF-A9 PWM CHROMAX were used
Thanks for the test. You can share a link where to buy such an adapter for installing a 120mm fan
I bought an adapter from AliExpress.
Search Google for AXP90 120mm adapter and you'll find it.
ko.aliexpress.com/item/1005003466412915.html
@@DalraeMyo Thank you
Mission incomplete:
1. Missing results for same temp, but different dB(A).
2. Missing 140x15mm that would cool RAM @ lower RPM (arctic, thermalright, silverstone, no noctua)
I dont get how this bracket fits this cooler i cant fiegure it out even putting your video on the slowest speed
where can i buy this NF-A12x15 Mount sir Dal ?
I bought it on AliExpress, and I searched 'AXP90 Adapter' to find the product.
@@DalraeMyo Preciate it sir Dal Thanks
역시 큰게 좋네요 혹시 팬 브라켓은 어디서 구매하셨는가 알 수 있을까요?
알리익스프레스에서 구매했습니다. axp90 adapter 검색하면 찾을수있습니다.
Wow!! 92mm fan beats 120mm..
which is the best?
If you only look at the CPU cooling performance, the bundle fan is the best, and you want to reduce the quietness of the cooler and the ambient temperature of the motherboard, 120mm is the best.
@@DalraeMyo I just bought it and will stick to original fan.
2:19 can you tell the name of this cooler adapter you use?
Googling 'axp90 adapter' and you'll find what AliExpress sells.
@@DalraeMyo thx!❤
Hello SIR! Please help me what is ur wifi antenna which u used on ur build?THX a lot for ur help.
Search RHCP Micro FPV Antenna on Google and you'll find it.
Thank u very much !
Let me aks u one more question please.
I built a louqe ghost with ryzen 7 5800x3d.
What cooling solution u suggest?An id cooling is 47s is do the job?Or swap the ventilator?Or anything else?
Thx for ur asnwer@@DalraeMyo
I understand that the IS47S has a worse cooling performance than I thought.
For LOQUE GHOST S1, the maximum mountable CPU cooler is 66 mm high. Therefore, the most recommended CPU cooler is the NOCTUA NH-L12 Ghost Edition.@@capybara_time
@@DalraeMyo I got that right now. Any other option?
Cannot find this fucken mount kit anywhere
우왓..
A12가 A9보다도 높게 나오네요 ㄷㄷ
CPU에 집중되는 92mm와 다르게 120mm는 주위로 좀 새는 느낌입니다.(덕분에 전원부 M.2 RAM이 온도가 확떨어지네요.)
소음 생각하면 역시 거거익선 이네요
덤으로 쿨링팬이 주위에 전원부/M.2/RAM까지 냉각시켜줍니다.