Hello friends, I want to acknowledge due to some technical issue, the audio is not present in this video. As well request to my guests to subscribe the channel, so that I can grow my channel.
I want to know if I can configure an extension in country A and another in country B and if you could explain to me how to do it because I don't know how to do port forwards and where I should do it if possible.
In Grandstream ucm? It depends on the service provider, different service providers have different pattern. So the service provider will provide the details accordingly and we will set it.
Hi, If you have configured email in ucm than you can recover password by forget password option. But if you haven't configured, then no chance to recover password and need to hard reset the ucm.
Do you know how well this would work with Spectrum Voice? We have the Spectrum Voice modem with 6 POTS lines on it tied an old Panasonic KSU. I'd like to try connecting the sprectrum lines to a Grandstream IP PBX UCM6208 FXO inputs.
Hi, You need to create analog trunks in Extension/Trunk>> Analog Trunk after that create outbound and inbound route for calling. If you need further assistance please mail me at voipknowledge2023@gmail.com
Hi, Create Analog Line in UCM under Extension/Trunks>> Analog Trunk>> Add Select the Port, give a Name Set Caller ID : Auto Detect And SAVE. Create Inbound Route : Set destination to Extension or desired option Create Outbound Route : Set Pattern = X. Set Privilege : Internal Select the Trunk : as Analog Trunk
@@Voipknowledge ok i have UCM6302A and four post GRP2602P after configuring the settings especially the analog trunks my system doesn't work very well because the incoming calls numbers do not appear on the phone screen .and phone screen show just four ziros when incoming calls
Hi, Have you checked analog lines directly on an analog phone, whether you are getting CLI. As well you can try caller id scheme as Auto detect in ucm under analog trunk.
Hi Sir, I just wanted to ask if Cisco Phones like the models 7821, 8861 are compatible with this PBX. Your answer will be very much appreciated. Thank you!
@@Voipknowledge Thank you so much for the reply! I just subscribed to your channel. Additional question if you don't mind, what model of GRP phones can you recommend that's almost the same as the 7821 model? Again, I appreciate your reply, thank you so much!
Hi! Thank you very much for the video. I have a problem: I could add one extensión, but I can't configurate the voicemail.The voicemail functions between extensions, but not from a call from the outside. Can you help me? Thank you, very much
Hi, Thank you for watching the videos. Are you not able to get voicemail when calling from outside or you do not want voicemail function for external incoming calls? Please explain.
If you are using extension locally then no internet required. But If you want to use extensions at different locations then internet and port forwarding required.
You're very welcome! I'm glad to hear that the information was helpful for you. If you have any more questions or if there's anything else you'd like assistance with, feel free to ask. I'm here to help!
Thanks. Comprehensive and helpful
Thanks for watching the video.
Very helpful
I am glad you watched my video, thanks for watching the video.
Please subscribe the channel 🙂.
comprehensive video for basic setup
Thanks for watching the video and your comment 🤩
Thanks for the video, it really helps alot 😊.
Glad it helped!
Hello friends,
I want to acknowledge due to some technical issue, the audio is not present in this video.
As well request to my guests to subscribe the channel, so that I can grow my channel.
Sir big fan sir your videos is very informative sir thank you so much sir for making this informative video.
Thanks friend ❤️
Welcome 😊
I want to know if I can configure an extension in country A and another in country B and if you could explain to me how to do it because I don't know how to do port forwards and where I should do it if possible.
Hi,
You can do port forwarding in Router/Firewall.
As well you activate UCMRC PLAN on your UCM by just adding it on gdms.cloud portal.
hi i hope you are doing good! question: how do you add DID to extension in order to it can receive and do externals calls to PSTN?
In Grandstream ucm?
It depends on the service provider, different service providers have different pattern.
So the service provider will provide the details accordingly and we will set it.
Hello could you suggest how to reset the UCM6302A Device admin Password, without resetting entire device.
Hi,
If you have configured email in ucm than you can recover password by forget password option.
But if you haven't configured, then no chance to recover password and need to hard reset the ucm.
Do you know how well this would work with Spectrum Voice? We have the Spectrum Voice modem with 6 POTS lines on it tied an old Panasonic KSU. I'd like to try connecting the sprectrum lines to a Grandstream IP PBX UCM6208 FXO inputs.
Hi,
You need to create analog trunks in Extension/Trunk>> Analog Trunk after that create outbound and inbound route for calling.
If you need further assistance please mail me at voipknowledge2023@gmail.com
Hi sir,gm...I have ucm6301 and ip telephones and I want to setup inbound and outbound and activate main Airtel telephone line..how to setup all
Hi,
Create Analog Line in UCM under Extension/Trunks>> Analog Trunk>> Add
Select the Port, give a Name
Set Caller ID : Auto Detect
And SAVE.
Create Inbound Route : Set destination to Extension or desired option
Create Outbound Route : Set Pattern = X.
Set Privilege : Internal
Select the Trunk : as Analog Trunk
@Voipknowledge any video available
@Voipknowledge and can I directly connect Airtel telephone line in ucm6301..and which port need to connect in ucm
Yes, you can connect direct Airtel Line on UCM FXO Port ( Last port on the Backside).
Currently No Video on this Topic.
Can I connect one analog phone as extension line to this PBX?
Yes, you can connect.
It has FXS and FXO Ports as well.
the my ucm 6302A does not show incoming calls numebers on the screen haw can i fix this . thanks
Please explain the complete scenario with all details.
@@Voipknowledge ok
i have UCM6302A and four post GRP2602P
after configuring the settings especially the analog trunks my system doesn't work very well because the incoming calls numbers do not appear on the phone screen .and phone screen show just four ziros when incoming calls
Hi,
Have you checked analog lines directly on an analog phone, whether you are getting CLI.
As well you can try caller id scheme as Auto detect in ucm under analog trunk.
@@Voipknowledge your comment helped me a lot thanks
Thanks for the update, happy that your issue is solved.
Hi Sir, I just wanted to ask if Cisco Phones like the models 7821, 8861 are compatible with this PBX. Your answer will be very much appreciated. Thank you!
Yes they are supported.
But as per my experience i worked on 7821, 7841, 3905, 8821 and 8845, they are working fine.
@@Voipknowledge Thank you so much for the reply! I just subscribed to your channel. Additional question if you don't mind, what model of GRP phones can you recommend that's almost the same as the 7821 model?
Again, I appreciate your reply, thank you so much!
You can use GRP2612P
Hi! Thank you very much for the video. I have a problem: I could add one extensión, but I can't configurate the voicemail.The voicemail functions between extensions, but not from a call from the outside. Can you help me?
Thank you, very much
Hi,
Thank you for watching the videos.
Are you not able to get voicemail when calling from outside or you do not want voicemail function for external incoming calls?
Please explain.
@@Voipknowledge I'm not able to get the voice-mail when calling from the outside. Thanks
Sir it work without internet
It's working internal call only without internet
If you are using extension locally then no internet required.
But If you want to use extensions at different locations then internet and port forwarding required.
@@Voipknowledge only local call inside office
For outside call on mobile and landline numbers, you need to connect pstn line or SIP trunk on UCM.
Sir can you upload video local calling configuration without internet cable without router
how to connect externally sir
thank you , ur vidio make my idiot head works on
You're very welcome! I'm glad to hear that the information was helpful for you. If you have any more questions or if there's anything else you'd like assistance with, feel free to ask. I'm here to help!
Thanks for watching the video☺