Thnx for this video. Fixed my problem with not getting coffee out of the machine after brewing! Despite regular cleaning the machine, this still is a thing you have to clean like every six months or so.
Thanks! The part you opened up, it was completely clogged for me. Because of that, the machine would only grind up the coffee beans but not make any actual coffee.
The most 'yummy' part starts at 3:45 😆 I wash my brewing unit every week-10 days and clean drainage valve every 6 months or so. After last cleaning I just didn't put those screws back only plastic cover so I can remove it without any tools and check how dirty it is when I clean brewing unit.
Hi Quasisaur, my machine says just "please fill in with water", but when I press button, it just try to do it but then shows that message again. Any ideas? :( Thank you! :)
Already sold it for a good price) I cleaned it before selling 😆 Ive bought Nivona 790 - same problem tho - so probably will make a new vid soon about it))
Thanks a lot man! During descaling process, the process halted. The steam valve light is on, and nothing happens, no matter what I do. Any idea what to do?
@@thediygovernor I once encountered something like this - descalling was done but the light was still there. I think it has something to do with water tank - I tired filling it up again and then it started all over again
@@Quasisaur unfortunately it didnt solve the problem. I never use the steam valve, just use it for descaling. Any idea how to hard reseat the machine? I just want to make coffee. BTW I cleaned it according to your instructions.
@@thediygovernor Sorry I already sold mine and bought new Nivona 790. I remember sometimes it stuck making coffee tho - if it ran out of beans - I had to manually drain some water through steam valve - and then it started working again. Have you tired that? Fill tank with water - and then drain it all through steam valve.
Hello,nice video! My machine had issue to complete coffee making cycle,it starts to press coffee powder after grinding beans,but sometimes it will stuck or smth like that(pressing motor make continous sound,like it wont have enough power to press it completely). Could it be related with that what you just did? Anyway,i will do that.Just cleaning brewery unit dont help for me
Well u can try cleaning this and based on results consider further options. Maybe u need to lube brewing unit. I had an issue like that so I had to replace the whole drainage valve(old one had one invisible for eye hole inside plastic part). I filmed a video how to do it but didn't finish it🙂 I can upload it if u need
It has best cappuccino maker in its price range so I think yes I would recommend it over any carob coffee maker under 500 $ Don't drink much espresso myself but I think it's fairly decent. Not THE best but good
@@jayr8600 I wash my brewing unit every week-10 days and clean drainage valve every 6 months of so. After last cleaning I just didn't put those screws back only plastic cover so I can remove it without any tools and check how dirty it is when I clean brewing unit.
NOBODY In ANY guide of tutorial or instruction has seemed to EVER say that when you put it back inside, besides clicking the button at the back, you MUST pull the lever itself slightly up, so it doesnt resist you
Thnx for this video. Fixed my problem with not getting coffee out of the machine after brewing! Despite regular cleaning the machine, this still is a thing you have to clean like every six months or so.
Finally full cleanup video, thank you man!
Спасибо за видео. Горячая вода стала плохо набираться, эта чистка помогла.
Thanks! The part you opened up, it was completely clogged for me. Because of that, the machine would only grind up the coffee beans but not make any actual coffee.
The most 'yummy' part starts at 3:45 😆
I wash my brewing unit every week-10 days and clean drainage valve every 6 months or so. After last cleaning I just didn't put those screws back only plastic cover so I can remove it without any tools and check how dirty it is when I clean brewing unit.
Hi Quasisaur, my machine says just "please fill in with water", but when I press button, it just try to do it but then shows that message again. Any ideas? :( Thank you! :)
@@RockySVK sorry no idea) might be logic board might be magnetic(Hall) sensor - I have no experience with this)
Thank you
Great vid! But broski clean this machine more often hahahaha 😂
Already sold it for a good price) I cleaned it before selling 😆 Ive bought Nivona 790 - same problem tho - so probably will make a new vid soon about it))
When I turn the handle on my brewing unit, it remains stuck, it becomes a bit lose, but it does not pull out. Any suggestions?
Don't know tbh. But I guess u can try to unscrew a handle -there's a visible screw a try to rotate locking mechanism by hand or some tool
@@Quasisaur Thanks!
Ich habe das gleiche Problem 😢, der Griff bricht bald, können sie eine Lösung finden?
Thanks a lot man! During descaling process, the process halted. The steam valve light is on, and nothing happens, no matter what I do. Any idea what to do?
@@thediygovernor I once encountered something like this - descalling was done but the light was still there. I think it has something to do with water tank - I tired filling it up again and then it started all over again
@@thediygovernor Have checked water tank sensor?
@@Quasisaur will try that, thanks for the fast response!
@@Quasisaur unfortunately it didnt solve the problem. I never use the steam valve, just use it for descaling. Any idea how to hard reseat the machine? I just want to make coffee. BTW I cleaned it according to your instructions.
@@thediygovernor Sorry I already sold mine and bought new Nivona 790. I remember sometimes it stuck making coffee tho - if it ran out of beans - I had to manually drain some water through steam valve - and then it started working again. Have you tired that? Fill tank with water - and then drain it all through steam valve.
Perfect
Hello,nice video!
My machine had issue to complete coffee making cycle,it starts to press coffee powder after grinding beans,but sometimes it will stuck or smth like that(pressing motor make continous sound,like it wont have enough power to press it completely). Could it be related with that what you just did? Anyway,i will do that.Just cleaning brewery unit dont help for me
Well u can try cleaning this and based on results consider further options. Maybe u need to lube brewing unit.
I had an issue like that so I had to replace the whole drainage valve(old one had one invisible for eye hole inside plastic part). I filmed a video how to do it but didn't finish it🙂 I can upload it if u need
And after pressing fail coffee powder is dry
@@consalez25 Check drainage valve for leakage ruclips.net/video/7p1ABfITDcE/видео.html
@@Quasisaur Ok,thanks. i will check it.
You saved me
Im glad I did :)
Error 12 .what problem sir
So is this a good machine making good espresso?
It has best cappuccino maker in its price range so I think yes I would recommend it over any carob coffee maker under 500 $
Don't drink much espresso myself but I think it's fairly decent. Not THE best but good
this operation in any way affects the warranty ?
Nope. All screws can be put back in place so it looks like it's brand new.🙂
What you use to clean? Is that a irigator or other pump?
irrigator b.well but Ive seen a video where guy used rubber pear for that.
Pls help me the brewing unit wont go back in I dont understand the last part
Make sure the grey(slightly brownish) part of a unit(that goes back and forth) is in its place should click when pushed to the side
So after how many cups/how often you need to do this?
@@jayr8600 I wash my brewing unit every week-10 days and clean drainage valve every 6 months of so. After last cleaning I just didn't put those screws back only plastic cover so I can remove it without any tools and check how dirty it is when I clean brewing unit.
@@Quasisaur Thank you for your answer, after a short debate we stayed with Jura, but I do understand why people choose nivona over a jura
Здравствуйте,не подскажите,а какая маркировка на пластике заварника стоит у Nivona?Не могу нигде найти эту информацию.
А где смотреть? На моём никаких наклеек/табличек нету вроде
@@Quasisaur должно быть тиснение на самом пластике
@@Quasisaur на заварнике точно должно быть из чего он сделан
@@marinadu5275 >pom< 2 написано, больше никаких маркировок не нашел
@@Quasisaur я написала уже Nivona)они мне ответили abs,сейчас разбираюсь)
can't get it back in
NOBODY In ANY guide of tutorial or instruction has seemed to EVER say that when you put it back inside, besides clicking the button at the back, you MUST pull the lever itself slightly up, so it doesnt resist you
Horror. Mans! - never do this like that!
? What so you mean?
Сложилось ощущение что после данной чистки кофемашина чище не стала
С чего такие выводы?