Replacement 4 pole cable on Aliexpress: - bit.ly/3z64wTb Headphone stand on Aliexpress: - bit.ly/3wvvEwh Headphone stand on Amazon: - US amzn.to/3ozI3h0 - UK amzn.to/3tBiQ5C - DE amzn.to/3JG4rur Replacement 4 pole cable on Amazon: - US amzn.to/3oznilE - UK amzn.to/3lItCRj - DE amzn.to/3Q4SnXy
I didn't understand the part about the white cable, what is it that is done with that part? I have the 4-polarity cable, I understood to make the bridge with the mic to ground, but what is it done with the white cable? the mic +
Buy a multimeter; it's inexpensive but can be a lifesaver in many situations throughout your life. :) Multimeter on Aliexpress: - s.click.aliexpress.com/e/_Ddiq1rd Multimeter on Amazon: - US amzn.to/3SZ1uMq - UK amzn.to/4dwOu8M - DE amzn.to/4dAw9be
What version of HyperX Cloud Stinger is this? It has a mesh fabric headband and a volume wheel. Both the Cloud Stinger S and Cloud Stinger have leatherette headband and a volume slider.
I have a hyperx cloud stinger but it is a little different than this and i am confuse at the jumper part. do i jump solder the copper to it place and then jump it with the green?
I stretched them for 8 years now the wire is fucked up and the right earphone only works when i hold the wire lol but for like 50$ USD they 100% did their job just bought the Cloud core HyperX wireless this time at the same price of 50$ USD think it
why do you need it ? hide ir just by flipping it vertically against the head Make detachable mic for stinger is too complicated, there's a mic MUTE button makes everything complicated.
@@TechscrewDIY Sorry I forgot about this. But My mic died. I guess the tinny driver inside the mic is dead. Now that i think about it. I could probably just buy a mic and remove the driver and solder it on my mic.
@@TechscrewDIY There is also one more solution.Where the flip is little bit above the flip, the rubber actually cracked. I could cut it there and just solder the socket on it. It would be above the mute switch rotation. I guess would still have the function for mute when i flip it vertically ? Since i wouldnt touch that mechanism. If you get what im saying. Since its just 2 wires positive and negative ? Thats what i see from the pictures. I dont have any HD pictures. But on the pcb of the headset it says mic_gnd and mic+ I just need 3.5mm female 2 pole pin jack
Replacement 4 pole cable on Aliexpress:
- bit.ly/3z64wTb
Headphone stand on Aliexpress:
- bit.ly/3wvvEwh
Headphone stand on Amazon:
- US amzn.to/3ozI3h0
- UK amzn.to/3tBiQ5C
- DE amzn.to/3JG4rur
Replacement 4 pole cable on Amazon:
- US amzn.to/3oznilE
- UK amzn.to/3lItCRj
- DE amzn.to/3Q4SnXy
how tf do you have a 211 subs dude wtf you helped me allloooooott
thanks, we have only recently started our journey :)
I didn't understand the part about the white cable, what is it that is done with that part? I have the 4-polarity cable, I understood to make the bridge with the mic to ground, but what is it done with the white cable? the mic +
Awesome video!!!!! Im going to do this to my HARX-700
Pro Tip: Put the ear pads back on AFTER putting on the heat shrink tubing or risk burning/distorting the rubber covering of the earpads.
good suggestion, extra security is never a bad thing. Thanks :)
I don't have a multimeter do you have any suggestion for changing cable of the arctis 1?
Buy a multimeter; it's inexpensive but can be a lifesaver in many situations throughout your life. :)
Multimeter on Aliexpress:
- s.click.aliexpress.com/e/_Ddiq1rd
Multimeter on Amazon:
- US amzn.to/3SZ1uMq
- UK amzn.to/4dwOu8M
- DE amzn.to/4dAw9be
What version of HyperX Cloud Stinger is this? It has a mesh fabric headband and a volume wheel.
Both the Cloud Stinger S and Cloud Stinger have leatherette headband and a volume slider.
I don't remember, but the principle of this instruction can be used for any Stinger headphones.
Очень помогло, спасибо.
спасибо
I have a hyperx cloud stinger but it is a little different than this and i am confuse at the jumper part.
do i jump solder the copper to it place and then jump it with the green?
if your replacement cable dont have 5 wires, then the jumper is needed to connect speaker ground with mic ground.
I stretched them for 8 years now the wire is fucked up and the right earphone only works when i hold the wire lol but for like 50$ USD they 100% did their job just bought the Cloud core HyperX wireless this time at the same price of 50$ USD think it
3:24 what tool is that which you're using to bore the hole manually?
It's Reaming Knife Drill - bit.ly/3wFQeIy (aliexpress)
or on Amazon:
- US amzn.to/3PyabK0
- UK amzn.to/3yQp4BA
- DE amzn.to/3lvh5lr
nice video dude. Do you know how to open soundcard 7.1? old jack broke the half inside and i need to remove it.
it is probably glued and will need to be carefully pried open
Maybe you could grab a toothpick or half sharpened pencil and super-glue it to the end of the jack to pull it out?
I hope you reply. But is it possible to make detachable mic like on hyper x core ?
why do you need it ? hide ir just by flipping it vertically against the head Make detachable mic for stinger is too complicated, there's a mic MUTE button makes everything complicated.
@@TechscrewDIY Sorry I forgot about this. But My mic died. I guess the tinny driver inside the mic is dead. Now that i think about it. I could probably just buy a mic and remove the driver and solder it on my mic.
@@TechscrewDIY There is also one more solution.Where the flip is little bit above the flip, the rubber actually cracked. I could cut it there and just solder the socket on it. It would be above the mute switch rotation. I guess would still have the function for mute when i flip it vertically ? Since i wouldnt touch that mechanism. If you get what im saying. Since its just 2 wires positive and negative ? Thats what i see from the pictures. I dont have any HD pictures. But on the pcb of the headset it says mic_gnd and mic+ I just need 3.5mm female 2 pole pin jack
is it possible for the Cosmic byte gaming headphones ?
same bro
@@ariyan786.99 when and from where did you bought it ?
i gave up and broke my headphones thank u