Making a Figure-8 Slingshot Using Only Handtools
HTML-код
- Опубликовано: 25 авг 2024
- The New Jackalope and "The Basic" (until I find a better name)
Here is a link to my Etsy shop:
smosslings.ets...
Here is my SimpleShot Affiliate Link:
simple-shot.co...
Here's some Amazon Affiliate links for actual good products:
Handle Shrink Wrap:
amzn.to/3Pc89Q
Total Boat Epoxy Resin:
amzn.to/3fBD20v
My Chronograph Kit:
amzn.to/39ELuZb
Descender:
amzn.to/3rxu6eV
My favorite coupon app Ibotta is a free app that gets you cash back on groceries
Sign up at → ibotta.onelink...
Check out this free app that gets you cash back on gas..
Click this link or use promo code JORDAN62939 to get an extra 15¢/gal bonus the first time you make a purchase. upside.app.lin...
Rather than the music, it would be nice to here you explain what you are doing. Especially since the video is being sped up. Just a thought.
Funny in super speed😁
Might be time to swap out that hacksaw blade, mate 👍🏻
Thumbs up for Duff!
@ 3:40 Post Malone vibes 👋😅🔥🔥💯💯💯
Great idea!
Okay! I just want you to know that I have a bunch of POCKET PREDATOR and SimpleShot sling shots. MY ABSOLUTE FAVORITE AND THE ONE THAT IS IN MY POCKET, CAR OR BACKPACK IS YOUR DESIGN! Well done. Easy to make, indestructible and easy to shoot. THANK YOU! 👍🏻
Yes sir! Thanks so much. I carry one everywhere I go too
Brilliant idea 👏🤙🙌🙌🙌🙌
Got it's a figure 8 DESCENDER..
Awesome Diy
Very cool...👍👍👍
Nice job sir! Nice tool for pulling the bands through. Looks like a larger version of what my uses for sewing.
ThAnks bro its butifull slingshit♥
The tool you have to thread the bands is a great idea.
nice slingshot sir , easy and simple
Yes sir
yesterday, I made one just like that. I used heatshrink tubing for wiring on the fork ends, added heat and they shrunk down to fit perfectly cut off the excess, and the bands are safe from damage, it is very accurate. thanks, nice addition to my collection of over a dozen slingshots, ring shots, and slingbows
I never even considered heat shrink tubing! That's an excellent idea...
Awesome craft you made the slingshot.love the frame.
Thanks for idea sir
Nice vid. Would have been better if the knot tying section had been in real time to make it easier to see what you were doing.
Update: Just watch the pouch and bands vid on your channel. All good. Thanks.
😍💖
I just got my figure 8's in the mail.
Thanks for the video.
Let me know how it goes!!
Пиляй, Грыня, пиляй! Она ж золотая 😂
Well ooga ping pong to you too!
Wow 🇻🇳
مرحبا اخي مااسم هذه الأداة وتستخدم لأي غرض؟
Good use of
Outdoor rock climbing ring
Awsome
Maybe new hacksaw blades or a 4 inch grinder.
Yea, the back saw has since gotten a couple new blades..lol
What item is that? I also want to make one
A nice build video, but should have shown a few shots with the finished product.
I like that “threader” tool. Looks like a fine mechanics wire, wrapped around a snap in a small leather thong? I ask as I struggle with the “wrap and tuck” method, as my fat fingers make it hard to work that finely.
Yea I get them from manufacturers occasionally when I buy band tie material or pouches 🤷
Magnífic..😍👍👏👏🌞
من اين احصل على تلك الحديدة
شو اسمهاه
wow! wish I have one of those... I can really put it to use... if you some to spare can I have one?
No, but you can buy one from my Etsy Store
@@TheSmoShow1 I am staying at the Philippines
@@TheSmoShow1 how much is it?
Going to buy myself a 8decender this week and make one of these ,most all my other cattys are made from natty forks but it's the size ,just nice for the pocket.
They are such great pocket Cattys, not to mention they're some of the most durable !!
Clever frame bro!
Ga ngerti bahasa Inggris yang penting jempol ajah.
What we call to tie tap for pouches?
Do you still make these to sell ?
Wow..I'm digging what you're doing but either I turn down the volume or give you a heads up..
Can you please make one for me
Thank you.
Great video I have always wanted to see these made. But the music is horrible.
Top meu irmão
شو اسم الحديدة
Simpel God job.👍👍👍
Hey buy a blade with some things called teeth on it. I think friction burnt through that 8. Better yet your production will sligjtly increase if you invest in some new thing called elecric sawsall! I hear good things. Keep living the dream you crazy romantic fool keep living the dream! Your 10's of adoring family,friends ,and fan base await your next stunning piece of art here on your channel. Will be patiently waiting right here on your channel so i can say i seen it first!!! Blessings our GIFT!!
padahal tong di potong oge bisa mang
👍👌👍
I love mine that you made for me. Thanks Again!
I'm glad you like it!!
How long did you take you to cut the mate for video keep it up 👍🏻 😁
I believe a hacksaw blade would work better than that thing you are using that must be plastic the way it cuts.
He just uses it wrong. Not a very good metal worker.
What a genius wasy to make $30
What is the name of the part you use for frame and where?
Thanks for replies.
Great video brother! Where did you get that taper stencil? It looks a lot more sturdy than what I’ve seen online.
I ordered a custom from Amazon, but it took 2 months to arrive....
Violeta si linda
شنو اسم هاذ الي سويته
Give me 1 please from indonesia
You need a new hack saw blade
Yes. I've since had a few!!
I also using figure 8 but my problem is my aiming reference,my anchor point is my cheek bone and gangster style but the aiming reference is too low using that method, almost 1 inches above the fork tip above the target
عالی
hài quá
сколька приблизно он резал ото жилеза
Me puede indicar el nombre de esos ganchos
Is there a way to make top bead stuck slingshot from this tool? it would be super good, because i cant find any good top bead stuck slingshot model.
what is the diameter of the black rubber? 👏👏👏👏👏🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹🌹
Can you give me slingshot from Philippines
Sure! I accept Paypal!!
Great work 🤘🏻What’s that rubber stuff your using over the ends please
It's just latex rubber tubing I bought on Amazon. 3/8in outside diameter, 1/4in inside diameter. They may have color options, although I haven't confirmed that.
@@TheSmoShow1 I ordered 3/8x1/4 "latex" tubing from ebay and it just won't stretch enough to get over the fork tips. I suspect that: (a.). it isn't really latex but neoprene or silicone; or (b) you have to have speargun band tubing for the elasticity.
I use a little rubbing alcohol or hand sanitizer on the fork tips and inside the tubing to lube it up a little.
@@TheSmoShow1 Tried that. Just not enough stretch in the tubing I have. I'm now looking for the Spearit tubing that you are using.
Can you make a list of what you used. Thanks
Make your own list you lazy ass. Maybe you can ask the dude to make one for you then you can pay him...get real!
It is not bad to ask what materials did he used.. it is just you have bad atittude . Sir ..
@@mr.powpow51 I suppose I can get a little grumpy. I have another channel where I fabricate straight razor scales and install them on refurbished vintage straights. And every time someone asks what I used or some other redundant question. Like the video here, what you're doing is self explanatory and all one needs to do is mimic the steps. All the materials are in the video and even in the description but in the end I see the maker of the video never provided the dude a list..it would be called extra and unnecessary work..good video, easy to follow and logical..
What is ur band size?
What's the outer fork measurement on that frame?
3inches or 76mm
@@TheSmoShow1 thanks for the reply
Awesome how much are they?
You can buy these fully built from my Etsy shop, or find a Figure 8 descender on Amazon and make your own!
Etsy.com/shop/optimalcreations
Ah found you nice work I want one😁
I just stumbled across your channel through it just popping up I just bought an orange slingshot from you yesterday lol what are they things you make them from if you don't mind me asking. I don't think Ive every seen those before
It's a figure 8 descender for rock climbing!
@@TheSmoShow1
Ah ok, Ive never been rock climbing which explains why I didn't know lol
Hello, is it necessary to put on the rubber tubes? Or is it just personal preference? And why?
Would love a reaction, keep up the nice work!
Not necessary. But It really does help the bands stay in place, as well as padding the bands against the fork tips. It also helps keep a positive grip on the fingers. But it's total preference!
@@TheSmoShow1 oh, ok! Thank you very much!
What is it u was cutting and where they from thanks so I could get some
And try it out
They are figure 8 descenders. Available on Amazon!!
Nice job! What kind of tube did you put around the forks?
It's 1/4 inside diameter, 3/8 outside diameter black latex tube.
@@TheSmoShow1 Thanks!
What are the things called
descenders
Where can i buy that frame
I want one bro
You can buy one from me at Etsy.com/shop/SmosSlings or just try to go build one!!
That my friend was great been looking of ways to make a slingshot and now I’ve found it. Ps where did u get the cutting board and the knife for the bands.
It's a band template you can get them on Amazon or AliExpress.. and the knife is a rotary cutter. Don't use anything except a rotary cutter otherwise you'll jack up the bands
Harga nya berapa boss
hi what's that white material you use to secure the rubber to the microfiber grip
It's called "Amber Belt" or "Amber Tape" you can get it from many slingshot websites, and it usually only costs a dollar or two for a roll.
How can i get one of these? Are there for sale?
etsy.com/shop/SmosSlings
What size tube did you use for the fork coverings?
1/4in ID, 3/8in OD
How long does it take to you to do this in this way?
Takes an hour or so to make one. Not bad.
@@TheSmoShow1
Oh that's way faster than I thought this way. Keep it up
How do I buy one from u and how much do u charge for them
Etsy.com/SmosSlings
Aaaww couldn't find it did you sell out? 😢
Real men use hand tools.
100% agree
Exactly.
Precision tool need user manual..
Hand tool needs skills, art, experience, talent, planning, patience.
This video could also double as a how to escape from old timey prisons video.
😭😭😭
من اين تحصل على النطاط ؟
Hi please tell me what the tape is that you tyed the pouch on with
👍🙂👍
What is the name of this tool
Figure 8 descender. Check the Description for a link!
Me da um pls
That is not a steel saw,
Its aluminum
The saw blade was definitely not properly clamped
X
Nice slingshot but the music sucks. I didn't watch until the end.
What is that thing sir..
Figure 8 descender. It's a piece of climbing gear
the video could have lasted 1 minute
All steps could have been shown in 2 minutes:
boring!!!
You can use electric tool, 🙄
Put a new blade in the saw, ffs!
Dude stfu this vid is how old!