Nice job on the video! You make it look very easy.... :) One of our largest challenges and because we ship so much each week, we attempt to scan all of our product then create shipments....but we run into the "you have not added anything to your box in over 48hour rule". Suggestion?
i can think of 3 ways but i haven't had the same problem as you.. 1, add them to holding bin. 2, click on reassign all button. 3, make a "Create shipment " then you can add more later on. I would do #1.
whats the fastest way to scan, label and box books with Turbolister? If I have 1000+ books. Should I scan & label them all with turbolister and set them aside, THEN create the shipment, then rescan each book for the boxes I add to? Or is there a quicker way? I would prefer to scan, label, then box instead of having to scan all 1000 books again to add to the boxes. Im doing LTL btw.
Any idea why I cant get 2D barcodes to print with Turbolister? Been stuck on this for a few days. I cant complete my shipment until I find a solution. TL prints test pages and FNSKU's fine, but for 2D barcodes an error message: "An error occurred during this operation". This happens with I click "print barcode" and "print all 2D barcodes". -2D barcodes is enabled on Amazon -Zebra 2844 printer (works, default printer) -Tried a second printer -4x6" labels used -Win 7 TL supports only answer to me is to rent their laptop. Any idea what I can do?
So, we created a new batch before closing out the previous batch...I can't get back to the old batch...Does the system now allow you to jump from one batch to the other? If so, how!!!???? help!
does turbolister allow you to upload box contents instead of printing a 2D barcode? Turbolister gives an error "an error occured during the operation" when I try to print 2D barcodes. (2D barcodes is enabled in Amazon)
turbolister is better but the only thing missing right now is accounting. they say it will be out by end of year. plus its free if you have scoutly already. but inventorylab isnt bad i used it for 2 years
@@lazyreseller7251 I decided to go with the $10 plan for Scoutly instead of ScoutIQ because it comes with TurboLister and as a new seller, saving money is my thing right now. My first week of selling, I made my $100 into $200 (that included my eBay stuff too), but I was super pumped when I remembered this came with Scoutly after I bought it. Anyway, my main question is, you can always change your printer settings at any time right?
Sorry for the last reply. yes you can change you're printer settings any time. if you're doing books i would upgrade to Professional just because of offline database. of course only after you start making money from books.
Every now and then I want to take pictures of my item to enhance its condition description on high priced and rare items mostly. Is it possible to add photos while listing in a batch? In the past, on other listing programs I had to list it on Amazon seller central and then add it as a replenishable to the batch. I tried this and it has been a few days and it won't pull up like most restock items. How often does Turbolister update the API on our inventory?
I already sent out my batch with UPS but i dont even have a button on my Turbo Lister that says "Complete Batch" just to get it out of my "In Progress" tab
Hey man I named my prefix first fba shipment and in Amazon under sku I have first fba shipment then some number is at the end is this right ? As before with using Amazon the sku would be the fnsku
Mad props for this vid bro!! You're the only RECENT video I can find like this. Great info!
Thanks for taking the time to do this, you've earned a new sub, cheers!
My brother are still selling on Amazon, this video is 4 yrs old? Is there an updated training? Do you use a repricer?
hello Why doesn't this graph appear when I use the application on my computer? how can i fix this?
What happened to you? Did you give up? Why did you stop making videos?
what if it wants you to ship to 5 different places? shouldnt it tell you what box to drop your item in?
Nice job on the video! You make it look very easy.... :)
One of our largest challenges and because we ship so much each week, we attempt to scan all of our product then create shipments....but we run into the "you have not added anything to your box in over 48hour rule". Suggestion?
i can think of 3 ways but i haven't had the same problem as you.. 1, add them to holding bin. 2, click on reassign all button. 3, make a "Create shipment " then you can add more later on. I would do #1.
whats the fastest way to scan, label and box books with Turbolister? If I have 1000+ books. Should I scan & label them all with turbolister and set them aside, THEN create the shipment, then rescan each book for the boxes I add to? Or is there a quicker way?
I would prefer to scan, label, then box instead of having to scan all 1000 books again to add to the boxes.
Im doing LTL btw.
How do you get the keepa chart to appear with the other info after you scan a book?
Any idea why I cant get 2D barcodes to print with Turbolister? Been stuck on this for a few days. I cant complete my shipment until I find a solution.
TL prints test pages and FNSKU's fine, but for 2D barcodes an error message: "An error occurred during this operation".
This happens with I click "print barcode" and "print all 2D barcodes".
-2D barcodes is enabled on Amazon
-Zebra 2844 printer (works, default printer)
-Tried a second printer
-4x6" labels used
-Win 7
TL supports only answer to me is to rent their laptop.
Any idea what I can do?
So, we created a new batch before closing out the previous batch...I can't get back to the old batch...Does the system now allow you to jump from one batch to the other? If so, how!!!???? help!
click on batch then click on completed( its on the top right
@@lazyreseller7251 Then what? It will now allow me to get back into the batch....Do I click on the batch number or something?
@@fatelvisgoodsllc8802 what are you trying to do? you dont really need to make a batch every time its not really necessary to make a new batch.
is an Amazon Professional account needed to take advantage/use Turbolister? If yes, does this apply to all listers? Thank you.
does turbolister allow you to upload box contents instead of printing a 2D barcode? Turbolister gives an error "an error occured during the operation" when I try to print 2D barcodes. (2D barcodes is enabled in Amazon)
Would it be better using this for books or should I just go with Inventory Labs ?
turbolister is better but the only thing missing right now is accounting. they say it will be out by end of year. plus its free if you have scoutly already. but inventorylab isnt bad i used it for 2 years
@@lazyreseller7251 I decided to go with the $10 plan for Scoutly instead of ScoutIQ because it comes with TurboLister and as a new seller, saving money is my thing right now. My first week of selling, I made my $100 into $200 (that included my eBay stuff too), but I was super pumped when I remembered this came with Scoutly after I bought it. Anyway, my main question is, you can always change your printer settings at any time right?
Sorry for the last reply. yes you can change you're printer settings any time. if you're doing books i would upgrade to Professional just because of offline database. of course only after you start making money from books.
Hey Man, mad thank you for all the videos. I was wondering though, is there an (preferably free) alternative to turbolister for Mac users?
Free? Nah
Every now and then I want to take pictures of my item to enhance its condition description on high priced and rare items mostly. Is it possible to add photos while listing in a batch? In the past, on other listing programs I had to list it on Amazon seller central and then add it as a replenishable to the batch. I tried this and it has been a few days and it won't pull up like most restock items. How often does Turbolister update the API on our inventory?
Hey, just wondering, can I use just a regular printer to print all my labels? Or do I need a Zebra? Thanks in advance
You can use regular printer. You need to buy "30 up label sheet" but you'll need to print those on Amazon seller central
@@lazyreseller7251 thank you. I have 30 up labels
Hi. Would I not be able to use TurboLister if I am only printing on Avery Labels? Thanks
you can use 30 labels page. just have to do it on amazon
Thanks!
I already sent out my batch with UPS but i dont even have a button on my Turbo Lister that says "Complete Batch" just to get it out of my "In Progress" tab
thats odd, are you in the latest version?
Hey man I named my prefix first fba shipment and in Amazon under sku I have first fba shipment then some number is at the end is this right ? As before with using Amazon the sku would be the fnsku
That right
@@lazyreseller7251 thanks I thought I did it wrong and Amazon would make me do new listings of everything lol
My turbo lister keeps crashing everytime I try put my address in and with out that I can't scan or ship any items
That's odd. Contact support and see what they say. I had something similar happen to me but I clean installed turbolister then it worked again
thank you for the video, hi is there a way to check a total of your profits ?
not yet. they are working on it, hopefully its out this year
@@lazyreseller7251 thank you for the reply
Awesome thanks for doing this
Appreciate your need for privacy, but you're blocking / obscuring so much I can't even see what you're doing.
the software is outdated and borderline trash