hold the start button until u go into P settings go to p07 by clicking the start button hold it and at the bottom of the screen there are numbers make it to 100 hold the start button to save and wait 20seconds to go back to main page
@downhill_rider732no es lo mismo yo necesito cancelar el limite de velocidad solo dejar a 25 pero desde los parámetros es fácil pero queria eliminar eso ya que la policía ya se sabe ese truco
It might not be something we do in the near future. It would be an expensive project as you'd need another controller, motor and would have to mod everything which could break everything. Probably not worth it
@downhill_rider732 it actually exists. Its just not kukirin, its kugoo. Quite a bad model, since the advertised 1500w motor turned out to be an 800w one
@@Toby22483this is what confused me caise mines red and black and kept seeing videos of everyone else's being woth orange so thought didn't have same scooter even tho it says it in it 🤦🏻♂️😂 glad I know now
Hello sir, can you show how you removed the face plate I'm trying to get the speed unlocked and don't want to make a mistake thanks! Are you supposed to remove the rubber padding first or?
Yeah you removed the edges of the deck pad to expose the screws. Then unscrew them and then slide the plate out towards the rear wheel. Hard to get the rubber deck pad back on looking perfect then. careful not to round the screws
It's fake, the scooter already came full speed, all he did is connect those cords which is the limiter then start recording and pretending like it came limited
Kugoo collaboration with Aovo and made the new G2 pro it's just the newer model the original G2 pro is no longer in production that stopped the start of 2023 because the new arrival of the new model there is how ever there is still plenty of the original still for sale
i have kukirin g2 pro and all you have to do is to go to p-settings (press power button 3 times fast ) go to p7 and set it to 100
How faster does it get?
@@ivicatalajic9908 45khm if the tune from p settings work i will have g2max this summer and i will tell u if it works
is it working
@@hydrax__ yes
@@ivicatalajic9908 it depends where you buy it becose sometimes it can be set to 70 or on 50 when you set it to 100 it will go 53-58
Thank you man
newer scooters press left brake and power button 2 times
I love you man srsly you saved my assssss i have "kukirin" in my country they call it rider but it is a kukirin g2 pro i think and it worked for me
Max g2 Please also find out how to cancel the speed limit. 😊
hold the start button until u go into P settings go to p07 by clicking the start button hold it and at the bottom of the screen there are numbers make it to 100 hold the start button to save and wait 20seconds to go back to main page
Do the same thing he did in the video
@downhill_rider732no es lo mismo yo necesito cancelar el limite de velocidad solo dejar a 25 pero desde los parámetros es fácil pero queria eliminar eso ya que la policía ya se sabe ese truco
does this work on a kukurin g2 aswell?
yes it does
Question before buying:
How is it possible that on a 48v scooter the screen says 53.6v ?
The charged voltage is 53.6v the battrey main voltage is 48
Because a 48v battary charges to around 54.8v
do to 28c and you can go to 60kmh :D
How
You mean to enter p settings and change p7 to 28??
Bro the cable your showing it's not showing up on my scooter please can describe me any other cables
Would this be a same method for a M2 Pro?
Creator? anyone knows? please help with this
no
Why do yours go 24 km/h before u unlocked the speed 🤔 ? I am thinking of buying a g2 pro btw thats why im asking
Can you make a video adding a motor to the front wheel
It might not be something we do in the near future. It would be an expensive project as you'd need another controller, motor and would have to mod everything which could break everything. Probably not worth it
Can it go even faster up 100? How to do it?
better controller
Does this work on g4 aswell
How fast does it go after
is same for g2 max ?
no u make it a little bit faster when u go pinto p settings i said how somewhere up comment
Any suggestions for kugoo g2 max fast charger options ?
Never go over 5amps, I would suggest a 3a charger however.
@@theebikeguy3852donde se puede conseguir uno de 3 amp
How do u make the g2 pro faster
i answered that question up there
Hi! How to unlocked speed limit to model kugoo g2 max 1500w? It goes only 37km/h
model with that watts of a motor doesnt exist u probably have a fake electric scooter
i answered that in up comment
@@downhill_rider732 its like 1000w and 1500w peak, i have it, this scooter isnt kukirin, its kugoo
@downhill_rider732 it actually exists. Its just not kukirin, its kugoo. Quite a bad model, since the advertised 1500w motor turned out to be an 800w one
El g2 max es de 1000 w
Will it work the same if the scooter is G2 max
Test it!!
Do it for kukirin c1 pro plssssssss
No!!! Just few steps on settings and that's it!!
will this give it a higher speed in mode 3??
ye it works for gear 3 only i think when i buy g2max i will tell ya
0:40
How do you unlock speed on kugoo g booster
can be done with the g3
Is it the same with the g2?
What g2 is better black and red or orange and black one ?
@@Toby22483this is what confused me caise mines red and black and kept seeing videos of everyone else's being woth orange so thought didn't have same scooter even tho it says it in it 🤦🏻♂️😂 glad I know now
so in mode 1 and 2 is the speed still 55km or is it reduced
its reduced
triple double oggggg
Same as g2 max?
ys
?But It’s destroying the battery
no it doesnt with that u do not overtune it samo scooters come like that stock so its not a problem
Hello sir, can you show how you removed the face plate I'm trying to get the speed unlocked and don't want to make a mistake thanks! Are you supposed to remove the rubber padding first or?
Yeah you removed the edges of the deck pad to expose the screws. Then unscrew them and then slide the plate out towards the rear wheel. Hard to get the rubber deck pad back on looking perfect then. careful not to round the screws
Thank you for your reply! you guys are a great help! Thanks!
How to do with g3???
Does it have the same display as in the video
What bout m4 pro?
It's fake, the scooter already came full speed, all he did is connect those cords which is the limiter then start recording and pretending like it came limited
You must be having a laugh here? Even if that was true it would still be a video showing how to remove the speed limiter on a G2 Pro. 😂😂😂
@@locoscootersirl first, its kugoo kirin g2 pro, and second, the scooter already came with the limiter disabled
@@Painsukii ok cool thanks for your input
How would u do this on the kukirin g3 pro
have you found a way to do it? I got one in Friday I think I'll leave it be for now the thing is an antichrist 😂😂
thats not a kugoo g2 pro
The version released last year is orange
@@jasong8977 also called kukirin not gt2 pro
Yes it is! Lol kukurin and kuugukurin are the same
buddy there’s like 15 different types of kugoo scooters
Kugoo collaboration with Aovo and made the new G2 pro it's just the newer model the original G2 pro is no longer in production that stopped the start of 2023 because the new arrival of the new model there is how ever there is still plenty of the original still for sale