If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Yous Little Blighter....What a wonderful company that makes this !..... I am gonna do a Mode with a Hemi blower Ead coming outta the Hood....wff sum pipes out the sides.. Wonke Wonderful,....Cheers,Me Limey Cousens!!!!!!
Hello Wayne that's amazing nice looking ecto-1 car ghostbusters. Nice work on this car. I enjoyed this video. I enjoyed those movies too. I have the proton pack and t-shirts too and detector.👏👍😇🤗😀😁💔💘❤️⭐🌟🌠✨
Another great video and the new Man Cave looks great! I'm getting impatient and thinking I might just have to order the packs and get caught up to you. 😆 🤣
Hi Wayne. Nice video as usual. I can't be sure, but it looks like the vent on the rear door was upside down when you installed it. The flat edge should be down when installed or water would be funnelled into the interior of the vehicle when it rains.
The paint and finish looks amazing on this. Pro-Tip: once you get the car finished use actual car wax on the model to keep it shined polished and fingerprint free.
Looking good. Just got my power mod in and another shipment of detail parts from Mike Lane. Only issue I had was one of the magnetic wheel caps went in and wont release like the plastic is too snug fitting on the hubcap. But thats no big deal for me, I mainly wanted the correct centers I dont foresee a reason to be pulling the caps off. Only thing holding me up now is getting the interior upgrades, I hear Model Modz is working on a scanning police scanner as well as the scope which I really want to get for mine and I hear Model Modz is working on 3D printed interior pieces such as the under dash heater box which I am wanting to get those pieces. I would get them from the other guy but it seems like Model Modz is going to offer the same components for less which is what I am holding out for.
Looks like your trim is starting to come up around your rear passenger-side window there, Wayne. Man, this thing is looking great. I wish I wasn’t so behind on this. I’m waiting on pack 15 to ship right now. :(
Looking great, but I had a little thing to point out then noticed that Gary Whitfield had already pointed out your little mistake with the rear door vent detail that you obviously made deliberately so we don't have to 😂.
@@WorldofWayneUK You seem to be becoming a dab hand at building miniature vehicles, I have the entire front end off my real car at the moment so I could get to the gear box, feel free to drop by Salisbury to help my mate and rebuild it if you're up for the challenge. I know you love electronics and there's tons of that to put back in 😂. Just kidding buddy, I could suggest a RUclips video titled 'Restoring Ecto 1' though. It gives you some lovely detail shots.
Been waiting since November to get this pack and it just shipped yesterday. Its a shame cause if they were shipping like they should I would be up to issues 119, 120, 121, and 122 right now leaving me just another 5 months to complete. Now I wont be completed till December if they dont delay issues anymore. But at least its giving the part works people time to bring out mods though, still waiting to get interior mods before I can attach everything to the chassis.
when you put the rear door on the witch was to the left, did you have to take the door off to reset the switch to the right so the door would flip it when opened? or did opining the door let you get the switch in the right place?
Looking great - you're a few issues ahead of me. Any news on the replacement front door - w/o wing mirror? I've not built it in anticipation of the right one arriving. Not seen anything about it except on your superb channel.
On 106 I have only one hole , had a few problems over last 10 or so issues. Don’t know whether to drill it through or just build with the single screw .
Hi, Wayne. In your previous Ecto batch of build videos you mentioned that you were going to remove the pre-installed rear door sticker and replace it with a Mike Lane sticker. Did you end up doing this? I was wondering how difficult it was/would be to remove the existing sticker.
Going to ask a dumb question but here goes. With the email we got about the right hand door with no wing mirror, it says the replacement is coming in issue 107 (I would call that Stage...!) shipment 28. I presume shipment 28 is actually Issue 29, because that's the next issue you'll be getting with stages 107-110?
@@WorldofWayneUK I bought the first issue to try it out, but it's 140 issues and there can't be THAT many parts so you're going to get lots of issues with very little to do. Plus I got the email about Titanic launching (no pun intended) on 22nd Jan so that's got to be my first choice
Well, that is accurate to how the actual car is constructed, even if there should be a large cutout below the attached panel. You can see that most clearly when Ray pulls up to the firehouse after buying the car in the first film. Admittedly they were actually different cars, but it was still a 59 Cadillac hearse/ambulance.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
One thing I love is how, when you shut the doors, it actually makes the same sort of sound as a real car door shutting, just a slight bit smaller.
Yous Little Blighter....What a wonderful company that makes this !..... I am gonna do a Mode with a Hemi blower Ead coming outta the Hood....wff sum pipes out the sides.. Wonke Wonderful,....Cheers,Me Limey Cousens!!!!!!
Hello Wayne that's amazing nice looking ecto-1 car ghostbusters. Nice work on this car. I enjoyed this video. I enjoyed those movies too. I have the proton pack and t-shirts too and detector.👏👍😇🤗😀😁💔💘❤️⭐🌟🌠✨
Great video
Great video as always Wayne, Ecto-1 is looking fantastic looks to be getting quite heavy. Looking forward to the next pack.
Finally finished the Hachette Manta GT/E and started Ecto-1 earlier this week.
Can't wait to have that all together.
Perfect again Wayne.
Loving the build as all ways.
Stay safe all.
Another great video and the new Man Cave looks great! I'm getting impatient and thinking I might just have to order the packs and get caught up to you. 😆 🤣
Coming along nicely
Hi Wayne. Nice video as usual. I can't be sure, but it looks like the vent on the rear door was upside down when you installed it. The flat edge should be down when installed or water would be funnelled into the interior of the vehicle when it rains.
Good point
Even I had to check as my OCD went mad after reading this lol .
hi love your vids i have been watching since your thunderbird 2 build from a while back now i do hope you had a nice holiday as well.
P.S. are you going to watch GB after life when it comes out next month?
Thanks Ian
Definitely
Hi wayne great news got my next issues of the spit fire came today
The paint and finish looks amazing on this. Pro-Tip: once you get the car finished use actual car wax on the model to keep it shined polished and fingerprint free.
Looking good. Just got my power mod in and another shipment of detail parts from Mike Lane. Only issue I had was one of the magnetic wheel caps went in and wont release like the plastic is too snug fitting on the hubcap. But thats no big deal for me, I mainly wanted the correct centers I dont foresee a reason to be pulling the caps off.
Only thing holding me up now is getting the interior upgrades, I hear Model Modz is working on a scanning police scanner as well as the scope which I really want to get for mine and I hear Model Modz is working on 3D printed interior pieces such as the under dash heater box which I am wanting to get those pieces. I would get them from the other guy but it seems like Model Modz is going to offer the same components for less which is what I am holding out for.
Looks like your trim is starting to come up around your rear passenger-side window there, Wayne.
Man, this thing is looking great. I wish I wasn’t so behind on this. I’m waiting on pack 15 to ship right now. :(
Yep. I got it
Probably noticed, but saw that part of your trim on the right rear window was popped up, in case you didn't
Yep. I got it
Finally got issue 8 building the enterprise d and porsche box 3 had it delivered today. Its too warm to attempt to do it right now
Hi Wayne have now completed issues 28 & 29 the rear fender looks amazing and the model is getting very heavy to move around.
Tell me about it lol
Hi wayne that looks great
Looking great, but I had a little thing to point out then noticed that Gary Whitfield had already pointed out your little mistake with the rear door vent detail that you obviously made deliberately so we don't have to 😂.
Lol. Yep. It's all fixed. I got issue 29 today too with the replacement door so more then 1 door has been removed now
@@WorldofWayneUK You seem to be becoming a dab hand at building miniature vehicles, I have the entire front end off my real car at the moment so I could get to the gear box, feel free to drop by Salisbury to help my mate and rebuild it if you're up for the challenge. I know you love electronics and there's tons of that to put back in 😂. Just kidding buddy, I could suggest a RUclips video titled 'Restoring Ecto 1' though. It gives you some lovely detail shots.
😆😆
Been waiting since November to get this pack and it just shipped yesterday. Its a shame cause if they were shipping like they should I would be up to issues 119, 120, 121, and 122 right now leaving me just another 5 months to complete. Now I wont be completed till December if they dont delay issues anymore.
But at least its giving the part works people time to bring out mods though, still waiting to get interior mods before I can attach everything to the chassis.
When will we get more Spifire, Leopard tank and Japanese Zero build videos Wayne?
Tank is tomorrow. Spitfire Thursday
when you put the rear door on the witch was to the left, did you have to take the door off to reset the switch to the right so the door would flip it when opened? or did opining the door let you get the switch in the right place?
The opening door let me locate the switch
@@WorldofWayneUK sweet less work for you to do hehe
Looking great - you're a few issues ahead of me. Any news on the replacement front door - w/o wing mirror? I've not built it in anticipation of the right one arriving. Not seen anything about it except on your superb channel.
Yep. I have it here. It will be on the channel on Friday.
Great, looking forward to seeing the fix. Assume the extra parts turned up with these other issues, will find out Friday I suppose 👍
i checked the logo on the door is screen accurate
On 106 I have only one hole , had a few problems over last 10 or so issues. Don’t know whether to drill it through or just build with the single screw .
I would see how it holds. Drilling as a last resort
Einfach super 👍👍👍👏👏👏❤️❤️❤️
Hi, Wayne. In your previous Ecto batch of build videos you mentioned that you were going to remove the pre-installed rear door sticker and replace it with a Mike Lane sticker. Did you end up doing this? I was wondering how difficult it was/would be to remove the existing sticker.
I haven't yet
Hi Wayne... any ideas how much it weighs now? Loving the build so far although I'm only on stage 20
A lot. Its getting a pain to lift now
I've read somewhere that the final weight is something like 15kg
@@chrisjubb-hearnborough 14.4 kg according to their website.
@@ronnieneo I was close enough 🤣
@@chrisjubb-hearnborough if you're into weight training you could always use it for bench pressing. It's one heck of a beast
Going to ask a dumb question but here goes. With the email we got about the right hand door with no wing mirror, it says the replacement is coming in issue 107 (I would call that Stage...!) shipment 28. I presume shipment 28 is actually Issue 29, because that's the next issue you'll be getting with stages 107-110?
The replacement door comes in stage 107-110. I have it here already. It will be on the channel on Friday
@@WorldofWayneUK thanks, I’ve got a busy time when that eventually comes as been collating the dispatches since the erroneous one!
Not sure where else to post this, so hope here is ok! Are you going to be building the Eddie Stobart truck?
No, I won't be doing that
@@WorldofWayneUK I bought the first issue to try it out, but it's 140 issues and there can't be THAT many parts so you're going to get lots of issues with very little to do. Plus I got the email about Titanic launching (no pun intended) on 22nd Jan so that's got to be my first choice
Persoanlly the Logo looks fine,, i rather have it to big versus to small,
Why couldn’t the bonnet vents be the same figment as this.. so much cleaner
That rear fender could have been just one piece, that's an odd way to stretch out the number of issues on that build...
Funny enough I got the next stage today. I will probably have this up on Monday
Well, that is accurate to how the actual car is constructed, even if there should be a large cutout below the attached panel. You can see that most clearly when Ray pulls up to the firehouse after buying the car in the first film. Admittedly they were actually different cars, but it was still a 59 Cadillac hearse/ambulance.
looks like i'm gonna have to..... butcher the quarter panels (cut off the skirts)
Woot more Ecto1 almost finished
they shld introduce millenium falcon
They did ages ago
Like video
👻👻🙌👏👍💔💘❤️
💞💞👍👍🙏🙏🐕🐕🍺🍺🇦🇺🇦🇺