Truly appreciate you watching the videos!!! New Merch available - bit.ly/2W68Gqp Heavy Metal here: bit.ly/30wF6wW Support us on Patreon www.patreon.com/whoteewho
Got a little hint for you to help determine overall reliability on any semi-auto you're testing. Usually the most difficult part of the feeding test will be the first few rounds off the top of a full magazine. This is for those times, like nowadays, when ammo is at a premium, but you need to stress the magazine/weapon interface more fully: fill the first part of the magazine with dummy rounds, then top it off with five live rounds, enough to fill the mag completely. Most of the time, if you're going to experience hang-ups, it will be from a full mag. You'll fire the first five, then remove and reload the dummy round that fed into the chamber back into the mag. It's a hassle, I know, but you'll get more accurate feedback on the reliability of your weapon that way. God bless you and yours, sir.
One reason I like watching your channel brother is that you keep it family friendly. You know Levi watches and a bunch of kids. Oh man I’ve got to get me one of them shirts. Are they shirts in 3x brother??? Whoooooo teeeeee whooooooooooooooo. GOD BLESS.
Thank You For this. Just Got a CPX-1 3rd Gen. Have not bought ammo yet it appears 115 works in this gun well from the videos I have seen. I will probabaly get Winchester 115 white box for practice and HP for carry. I did hear they hate Hornady XTP but you know that could be wrong.
I took my dremel and polished the feed ramp in my wife's CPX2. We never had a jam but I could tell the hollow points were trying to hang up when you charged it. It's smooth as butter now. Especially with Hornady Critical Defense. 👍
I polished my feed ramp along with other metal on metal contact points on slide and got a 20# spring. Went ahead and took the sharp inner edges off my magazines too. I'm super confident in this pistol. Videos like yours are a very good help in my firearm decisions and also learning about other things from you. Appreciate ya
Of course. I'm in the learning/research phase of this pistol. I currently carry a Sig P320 compact but it's quite heavy (nearly 2 lbs w.ammo). I love it but am seeking a lighter carry. Also something I enjoy target shooting. I've heard this SCCY at the gun store and loved it but still doing homework before a birthday purchase. My only worry this far is the long trigger pull... something I'm not used to. Yet it can be looked past considering all of the pluses for this pistol, low weight, reliability and cost being being the major ones.
Picking my new SCCY CX2 9mm up today. I hope it shoots near that good. From all the videos I have seen on here, its a great little pistol. Thanks for such a thorough video with so many different types of ammo. I prefer hollow point for CC.
you're getting to be a better shot. The Federal hollow might often cause a problem, the hole is so big it's kinda like having a flat nose on it, and not all feed ramps can handle it. Seems like a good shooting gun for you. You should see if you can get your hands on a Ruger Mark 3 and 4, run them side by side, see if there is any difference at all. I love the mark series, but the claim to fame for the 4 is easy take down for cleaning... well I never found that a problem, the mark 3 would just run and run and I would only need to clean it when I got home, clean the bore and maybe lube it a bit, I never tore it down, and it ran for years and years until I had to sell it..sorry I ever did, but one does what one must when the need arises.
@@nicktrue7915 the 4 is supposed to solve that, but I'm not one that tears them down, just clean the bore and put some lube on moving parts... that's about it, never had a problem with it. I think some people over clean them Never did much more than that with any of my weapons... never have a problem because of it.
I love my cpx but then I read the manual(!) And it says dont run +p ammomore than 50rd per session. I wonder what the point is for a 9mm gun if it cant run NATO ammo on a regular basis...
You have me really excited to run my CPX-2 after seeing all the great info and tests you have put into them! After watching the video a 2nd time I'm in love with the camo pattern. If you ever decide to autograph it and sell it off hit me up :)
This is the video I have been looking for. Great information for a new SCCY owner. I was wondering what was a good, reliable round. Again, thanks for a good, timely video, and great presentation. Your delivery is very down home and honest.
I have a sky CPX2 and for some reason when I go to shoot it doesn’t matter what the round is the gun will jam is it because the barrel is dirty or is it because the round is not being fed properly
Been shooting since the 70s. Technology has really improved since then. Cheaper weapons preformed poorly back then. Nowadays you reliability is the norm in less expensive weapons.
I just snagged up a CPX-2, and loaded the mag with Sig-Sauer Hollow points. I hope they don't jam up if I need them in a Home Defense scenario. I will have to spend some money at the range, to make sure it doesn't F2F.... Thanks for the heads up on HP hangups.
I'm going to see if I can get the same color you have from sccy I love that look and my slide is stainless hope I can get one you could be a nice guy and send me yours trade for my purple one 😆 your ammo test will save me some money on witch ammo runs better in the SCCY!
3 outta 5 at 50 yards on a smallish target with a shortie pistol? That's mighty fine shooting dude, well done. And before you defer, that ain't the gun; that's all shooter skill.
She does have a healthy diet and she sure loved the Jesse James ammo!! That was excellent marksmanship hitting that buffalo at that distance!! 💪 Thank You Sir!!
Get video, I like comparing ammo also to see which ones run better thru my guns as well. I carry Hornady XTP in my EDC 40cal. It eats them like M&M's!!!
Long and smooth a little bit heavy. But I've never heard of SCCY leg either. Don't have one but have tried one out. I like the trigger and am getting close to buying one.
I did mine helped alot ...my SCCY shoots every thing but doesn't care bout those wide mouth hollow points it will hang up like yours was doing polishing helps but I will stick with the smaller mouth hollow points....I use PMCStarfire in mine does really well
Watching some of your previous vids..I own a Taurus P11, which was designed by a co-owner of Sccy..guess I'm going to have to get me a Sccy soon..I hope the trigger pull is better than my P11..
@@WHOTEEWHO nice. I shot that alot in my 40 smith. Ill have to really step up the steel to hit at 50 yards. Hi i shot one of those all metal smith&wessons your like on vacation. Thing shot beautiful and it was filthy guy never broke it down in the whole time he had it. So i took it apart so he could from now on. Thanks who-tee-who
I've always used the steel case Tulammo or Winchester steel case Walmart special and have never had issues in any of my guns. Sucks Walmart quit selling the ammo. Fleet farm has a good selection but a little more money than Walmart- depends on the sales. I will be getting a sccy probably this week, just debating which one . I can find the cpx1-2 for $159-$190 on a few different sites.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Truly appreciate you watching the videos!!!
New Merch available - bit.ly/2W68Gqp
Heavy Metal here: bit.ly/30wF6wW
Support us on Patreon www.patreon.com/whoteewho
LOL!!! Flip off @1:07
Uh oh
@@WHOTEEWHO lol
My EDC is a cpx2 for the last 5 year never once had a problem
👍👍
I will die with my cpx2 by my side when ever that happens in my life time ..never no from day to day
You are a lot of fun to watch, and very informative, and Fair
Thanks for watching
When you made that video July 1 i turn 70 years old them Sccy are very good hand guns I picked one up today January 8 2020 .
Is the sccy still working well for you? I am debating get regular one, cpx-1. . .now I see red dot but not sure if I want to spend extra on red dot.
Carrying mine now
Awesome thanks. I will be picking one up.
Got a little hint for you to help determine overall reliability on any semi-auto you're testing. Usually the most difficult part of the feeding test will be the first few rounds off the top of a full magazine. This is for those times, like nowadays, when ammo is at a premium, but you need to stress the magazine/weapon interface more fully: fill the first part of the magazine with dummy rounds, then top it off with five live rounds, enough to fill the mag completely. Most of the time, if you're going to experience hang-ups, it will be from a full mag. You'll fire the first five, then remove and reload the dummy round that fed into the chamber back into the mag. It's a hassle, I know, but you'll get more accurate feedback on the reliability of your weapon that way. God bless you and yours, sir.
I'm a cheapo and only run steel. This dao pistol is amazing. Lifetime warranty as well.
Thank you.
I got red tips in my sccy 9 cpx 1 I hope it doesn’t mess up
Which type of ammo would be best for the cpx-2 ? I had hollow tips and notice it would jam so any recommendations ?
Just a out everything works in mine
@@WHOTEEWHO which ammo brand would you recommend ?
I wish that cheaper guns didn't get a bad shake. The SCCY seems to be a decent shooter.
I am a SCCY fan. Can shoot them just as good as any other pistols
All that different ammo says a lot for that little pistol being dependable. I like it.
I like it too!
I’ve probably had 2 malfunctions in 1300 rounds and 1 of those was steel case.
Great information thanks
One reason I like watching your channel brother is that you keep it family friendly. You know Levi watches and a bunch of kids. Oh man I’ve got to get me one of them shirts. Are they shirts in 3x brother??? Whoooooo teeeeee whooooooooooooooo. GOD BLESS.
Thank You For this. Just Got a CPX-1 3rd Gen. Have not bought ammo yet it appears 115 works in this gun well from the videos I have seen. I will probabaly get Winchester 115 white box for practice and HP for carry. I did hear they hate Hornady XTP but you know that could be wrong.
I took my dremel and polished the feed ramp in my wife's CPX2. We never had a jam but I could tell the hollow points were trying to hang up when you charged it. It's smooth as butter now. Especially with Hornady Critical Defense. 👍
Awesome
The sound of it going off is crazy
Good little pistol.
Sure is!
That's a cool little gun!
I like the sccys!
Mine doesn’t like the jhp at all almost always gets stuck on feed ramp Bc feed ramp is so steep
You're a fantastic shoot. I bought a CPX2 because of your Video. The review is spot on! It's a great little gun. 500 rounds no trouble. Thank you.
Sweet as Always
Thanks Po!
Sorry it's a Kel tek P11. It's 2 am, my bad. And July 1st is my birthday also !
I polished my feed ramp along with other metal on metal contact points on slide and got a 20# spring. Went ahead and took the sharp inner edges off my magazines too. I'm super confident in this pistol. Videos like yours are a very good help in my firearm decisions and also learning about other things from you. Appreciate ya
Good video review & great shooting.
Thanks for watching Michael!
Of course. I'm in the learning/research phase of this pistol. I currently carry a Sig P320 compact but it's quite heavy (nearly 2 lbs w.ammo). I love it but am seeking a lighter carry. Also something I enjoy target shooting. I've heard this SCCY at the gun store and loved it but still doing homework before a birthday purchase. My only worry this far is the long trigger pull... something I'm not used to. Yet it can be looked past considering all of the pluses for this pistol, low weight, reliability and cost being being the major ones.
Don't matter if that bullet is light, load is hot enough it will cycle well.
Yup
Nice firearm. Good shooting.
Thanks for watching Gun Guy!
Picking my new SCCY CX2 9mm up today. I hope it shoots near that good. From all the videos I have seen on here, its a great little pistol. Thanks for such a thorough video with so many different types of ammo. I prefer hollow point for CC.
Can I use a luger 9mm for my sccy?
The CPX- 1,2 are 9mm so yes. The CPX- 3,4 are .380 versions and a no.
Great video ! This pistol has been my edc for a few years , Can't beat it for the money. Sold my G26 and got 2 of these :-)
Yup I agree. I am a sccy fan
you're getting to be a better shot. The Federal hollow might often cause a problem, the hole is so big it's kinda like having a flat nose on it, and not all feed ramps can handle it. Seems like a good shooting gun for you.
You should see if you can get your hands on a Ruger Mark 3 and 4, run them side by side, see if there is any difference at all. I love the mark series, but the claim to fame for the 4 is easy take down for cleaning... well I never found that a problem, the mark 3 would just run and run and I would only need to clean it when I got home, clean the bore and maybe lube it a bit, I never tore it down, and it ran for years and years until I had to sell it..sorry I ever did, but one does what one must when the need arises.
I have a Ruger MK. 2 Target, and that pistol is super accurate. My only complaint is the takedown.
A nightmare.
@@nicktrue7915 the 4 is supposed to solve that, but I'm not one that tears them down, just clean the bore and put some lube on moving parts... that's about it, never had a problem with it. I think some people over clean them Never did much more than that with any of my weapons... never have a problem because of it.
oh I do usually take them in once a season for a going over by a gunsmith... but never did that with the ruger 3,
Excellent run.
Ate all of it!
a year old and still helped, thanks
Thanks for watching!
I love my cpx but then I read the manual(!) And it says dont run +p ammomore than 50rd per session. I wonder what the point is for a 9mm gun if it cant run NATO ammo on a regular basis...
Most can't NATO ammo is majorly hot loaded
I finally got one lol
What about the g2rip ammo?
Expensive ammo
For my daughter only the best!
When you come up remind me I’ll send some more with you to try. Great video brother as always. See u soon GOD BLESS.
You have me really excited to run my CPX-2 after seeing all the great info and tests you have put into them! After watching the video a 2nd time I'm in love with the camo pattern. If you ever decide to autograph it and sell it off hit me up :)
Mine is picky with ammo either soft jams or misfires…curious about blazer brass have you shot that?
Hmm. I do not recall
good shootin brother -- and great ammon roundup. The CPX-2 is a nice little piece.
I'm a cpx2 fan!
Tracers are my favorite round, because they always let you know where you coming from, And where you're going.
Tracers are fun
Always love the videos really appreciate the info.
Always appreciate you watching Joel!
Love the video just picked me one up today January 20 2021
Great video!! That 50 yard shoot was awesome!! Thanks!!
Thanks heavy metal!
Great Video
Thanks Israel!
I have the CPX-1 and the CPX-3 they're great eat anything you feed it great video
Thanks for watching Edward! Mine eat it all too!
This is the video I have been looking for. Great information for a new SCCY owner. I was wondering what was a good, reliable round. Again, thanks for a good, timely video, and great presentation. Your delivery is very down home and honest.
Thanks for watching William!
I use ftx 115 gr critical defense I read up on it and I have shot it a couple times it seems to be really good ammo
I have a sky CPX2 and for some reason when I go to shoot it doesn’t matter what the round is the gun will jam is it because the barrel is dirty or is it because the round is not being fed properly
@@danielwaters306 its the magazines take fine sand paper and get the burr off the inside of the feed lips or call sccy they will send you 2 new mags.
@@sean0181 oh gotcha so I should order two new magazines
I like the 124gr bullet now. My Taurus likes them to.
Always good to test to see which ammo runs better in your gun. Thank you very much. You and your family have a blessed week!!!
Yal too Chubbeth!
Been shooting since the 70s. Technology has really improved since then. Cheaper weapons preformed poorly back then. Nowadays you reliability is the norm in less expensive weapons.
Sccys run great and made in USA
Yup no doubt good stuff. Your point is made. Much respect my friend.
Things run good and I can shoot the crap out of em 🤣🤣🤣
I've heard the feed lips on some of the magazines tend to be pretty sharp and cause failure to feeds.
Mine had that problem but I polished the inside of the feed ramps on the mag and it stopped
Some pretty good shooting Mr Who
Thanks Joe!
What ammo would be good for the sccy cpx-1 ??
Remington Golden Saber for carry. For plinking any fmj
I had to polish the magazine feed lips for mine to feed anything with reliability.
I just snagged up a CPX-2, and loaded the mag with Sig-Sauer Hollow points. I hope they don't jam up if I need them in a Home Defense scenario. I will have to spend some money at the range, to make sure it doesn't F2F....
Thanks for the heads up on HP hangups.
Update.
They fire fine. Also, they are significantly less expensive than other Jacketed Hollow points.
A great purchase.
Sounds like your buddy Randall should be bought lunch sometime soon
Now that I thank bout it I’m out of fmj bullets I’ve got to get some.
Wait. What? You had to think about it?
Excellent video 👍
Thanks Jerry!
Man ,those buffalo shots were great 👍
Get lucky sometimes
Is not luck, Skills!!
I use Remington. If I buy some at the range I use whatever. Getting one of these as my backup for my Walther PPS M2.
I'm going to see if I can get the same color you have from sccy I love that look and my slide is stainless hope I can get one you could be a nice guy and send me yours trade for my purple one 😆 your ammo test will save me some money on witch ammo runs better in the SCCY!
Looks like a nice grip on that handgun.
Yup. Thing shoots good
You think it would be a good christmas present?
Absolutely
Got my wife the CPX-3 for her Christmas present. :)
Sure. send me one for Christmas!
I rly do like the look of that little pistol. Might have to reconsider one of those... 🤔 Thanks for doin another video with it.
I like the krytek pattern on it
Did you just flip us all off at 1:09 ???
Nope
1:07
That was some good shooting and pretty fast 3 out of 5 at 50 yard is actually really good
Thanks Alray!
3 outta 5 at 50 yards on a smallish target with a shortie pistol? That's mighty fine shooting dude, well done. And before you defer, that ain't the gun; that's all shooter skill.
Some days I get lucky. Shoulda got 5 for 5 😁😁😁
I’m tryin to get our buddy Paul at Heavy Metal Guns and Outdoors to start selling reloading stuff. That would be perfect.
I had them steel cases I don’t like loading steel cases but I did. Yeah I loaded all them.
Thanks Randle!
Those Fed HP plain box have a kind of sharp edge. I've had them hang up on ramps before too.
Yup they do
....i like it! i like it!!!!! muchas dude!!!!!!
No prob brother I hope they work good. They should.
love my sccy great video . hey was wondering if i could reach out to you ???
I am on fb and instagram
@@WHOTEEWHO alright brother!!!
Not sure if its the gun I like, or the name of it! Saving up for a SCcy .380
Sccy 380 in tonight's video! I'm a fan of their 9mm and 380
@@WHOTEEWHO oh boy, cant wait!!!!
She does have a healthy diet and she sure loved the Jesse James ammo!! That was excellent marksmanship hitting that buffalo at that distance!! 💪 Thank You Sir!!
Thanks for watching Kevin!
Get video, I like comparing ammo also to see which ones run better thru my guns as well. I carry Hornady XTP in my EDC 40cal. It eats them like M&M's!!!
Thanks for watching Shootyshoot!
Now how about some aluminum cased ammunition ??
SCCY cautions against using steel and aluminum cased ammo.
In my Sccy I run the federal hst 147g
No issues? I've read that the CPX 2 doesn't like anything over 115 grain.
I really enjoyed your video. Nice seeing what that SCCY will do. It will definitely be good information to pass along to my compadres.
I am a sccy fan!
I’d have to look in my notes to see what they are for sure brother. My wife’s Taurus 380 don’t like hollow points neither.
Nice fun video buddy!
Nice shooting! 👍🔫
Thanks Billy!
I don’t know if it is the camera angle or not. The first few shot had more muzzle flash than the later shot. Or was muzzle flash a sign of heart burn?
How’s the trigger on the SCCY thinking about looking at one.....
I'd say put one in you hand and see what you think. It is a DA only trigger
@@WHOTEEWHO think I'll check one out this weekend THANKS
Long and smooth a little bit heavy. But I've never heard of SCCY leg either. Don't have one but have tried one out. I like the trigger and am getting close to buying one.
Polish the ramp on the SCCY
Wouldn't hurt would it
I did mine helped alot ...my SCCY shoots every thing but doesn't care bout those wide mouth hollow points it will hang up like yours was doing polishing helps but I will stick with the smaller mouth hollow points....I use PMCStarfire in mine does really well
Watching some of your previous vids..I own a Taurus P11, which was designed by a co-owner of Sccy..guess I'm going to have to get me a Sccy soon..I hope the trigger pull is better than my P11..
Will the 9mm luger 119 gr fmj work
I mean 115 gr fmj work
Yes
That sccy likes to eat
Yeah it does!
Nice video 👍
Thanks for watching Dannie
50 yards with a tiny barrel!!!
What were ya shootin at the 50 yard buffalo who-tee-who? I take what ever it is will shoot as well in 40 right? Who-tee-who
I believe it was winchester white box
@@WHOTEEWHO nice. I shot that alot in my 40 smith. Ill have to really step up the steel to hit at 50 yards. Hi i shot one of those all metal smith&wessons your like on vacation. Thing shot beautiful and it was filthy guy never broke it down in the whole time he had it. So i took it apart so he could from now on. Thanks who-tee-who
Do you have a caliper? Wondering if those ones that hung up are a smidge longer that the rest.
Nope dont have a caliper. Could be
I've always used the steel case Tulammo or Winchester steel case Walmart special and have never had issues in any of my guns. Sucks Walmart quit selling the ammo. Fleet farm has a good selection but a little more money than Walmart- depends on the sales. I will be getting a sccy probably this week, just debating which one . I can find the cpx1-2 for $159-$190 on a few different sites.
Yup I shoot the cheapest ammo I can find
Awesome Shooting on the 50 yard target. I like this channel because it's not Gun Worship so many others act like they worship guns more than God.
I hear ya. Always appreciate you watching!
Whoooo-Teeee-Hooooo! The GF wanted a pink one, and now goes "Whoooo-teee-whoooo" whenever I watch your videos.
Whoteewho!!!🤣🤣🤣
Great video. I have a 9mm and it's great to know which ammo would work best for me
👍👍💥💥💥
Fun video! What is your opinion of EDC with frangible ammo? Just curious what you think of the idea? Thanks for sharing.
I have been carrying Honor Defense frangible 9mm ammo for the past year. I think it is great. I have probably 5 or 6 videos on it.
Good shooting.Thanks for the gun and ammo test!! I like that SCCY but I would lose it in the woods with that camo pattern!! LOL
Thanks for watching Wayne!