How to clean fuel injectors on a budget.

See how we clean fuel injectors on a budget. Its cheap and easy. These are fuel injectors for and LS 5.3 motor we took from a junkyard. Watch as the LS swap begins to happen on the Jeep YP LS swap.

[@user-cj5dd3hs1v]

This is the best video I seen thank you very much very helpful im from UAE County

[@gasratzcustoms]

You’re very welcome. Glad this video helped!

[@balball2000f]

Dat was Kool!!!

[@ericksmelendez3821]

Thanks for the video very helpful

[@gasratzcustoms]

👍👍👍👍👍

[@dioad1739]

Ingenious guys.

[@gasratzcustoms]

Thanks!

[@v3n0m72]

Guess I'm off to do this now

[@GrowDatSolja]

Saved meh 300 bucks cylinder 2 miss fire after changing plug and coil this exactly what it was number 2 injector was the problem

[@wheelietom]

Nice trick!

[@gasratzcustoms]

its a sketchy hack LOL

[@JerryHolaway]

Gump you're a damn genius

[@gasratzcustoms]

🤣🤣🤣🤣🤣🤣

[@sr9445]

Wouldn't it make sense to do it backwards to get out anything that might've made it past the fuel filters or junk that was too large to pass through the bottom?

[@dawndry2822]

So smart!

[@gasratzcustoms]

We try! Thanks for watching!

[@stanleysimpson5569]

Smart

[@gasratzcustoms]

Cheap and easy!!!

[@brucesacchetta6039]

Did it make a big difference after you installed them back in the motor?

[@gasratzcustoms]

Yes!!

[@GreaserthoughtsGarage]

HELL YEAH

[@gasratzcustoms]

Cheap and easy! Gotta save that money for turbos!

[@davidsantana3091]

By any chance you know the size of the hose you used diameter wise I was thinking like 3/8?

[@gasratzcustoms]

Sorry don’t recall but they were stock

[@Rusty3003]

Do you have to use a 9volt battery? Can you just use fluid tube and push it through with a air compressor?

[@Boredaf23]

It needs current to open up

[@jaredsharp5958]

So the brake cleaner won’t ruin the fuel line or cause a bad mix?

[@yaniraleiva6314]

Did you ever got an answer from your question, it is safe to use break cleaner?

[@gasratzcustoms]

It works just fine for us and never had a problem.

[@cygnus1965]

Brake cleaner or carb cleaner is just fine. I wouldn’t leave it soaking overnight or anything but blasting some through won’t hurt anything. I just used a clear hose and filled abut 3-4” with carb cleaner then used air from my compressor to blow it through. Started as a tight stream and ina few seconds switched to a nice atomized spray

[@phillipa7595]

:58 that’s what she said

[@E5mma_combat]

Make your hose shorter my man so you can get more pressure out your can...good video tho bro

[@cygnus1965]

Just use the clear hose and fill with carb cleaner and blow it through with air from a compressor

[@biggteez12]

A lil spit goes a long way 👀🤣

[@jasonflye2831]

You guys are lucky you still have facial hair lol

[@gasratzcustoms]

😂