Knife Sharpening Machine, Grinder, Using old Hard Disk Drive
HTML-код
- Опубликовано: 6 окт 2024
- This video is a way to make a used hard disk into a grinding machine seated using a 12v adapter.
Materials needed
1.hard disk used
3. LM7805 IC legulator
4.DC Jack Base
5. Adapter 12v dc 1A
Watch my other Video's..
🔴Potable air Freshner|Humidifier|Mist Maker|Ultrasonic
• How to make humidifier...
🔴Simple Voltage Regulator| Variable Power suply | Simple Adjustable Power Supply| Regulator Tutorial
• Variable Power supply ...
🔴What to do with old laptop screen | false window light panel | Light photo frame | Reading lamp
• Amazing idea with cra...
🔴Knife Sharpening Machine, Grinder, Using old Hard Disk Drive
• Knife Sharpening Machi...
🔴How to make Mobile phone Signal light sticker-Mobile Phone Radiation Power - LED EMF Detectors
• Free energy using mobi...
🔴How to Make VU meter, Easy & Simple Without IC LED Meter for Audio Amplifier
• How to Make VU meter, ...
Hello. So i want to build one of these but i know about -200% about electronics in the way of regulators. Resistors etc 😅 i was wondering if i can solder a 12v adapter straight to the HDD so its just plug and play or do i need the other parts? Great video :)
Çok güzel olmuş
Good and well done!
I didn't understand why you used IC 7805; if you had the HD board at hand. Was it a Hacking so that the Motor does not turn off after some time? Thank you
good video bro...
Thank you
Hi. Quick question. So the only thing I need to get the Hard Drive motor spinning is LM805 and 12v DC power supply?
Yes, make it like in the video
@@ELECTROBRO No harddisk motor is BLDC, it needs a controller.
Why did you lock between No. 2 and No. 6 in Soket Al-Sattah?
Thanks for sharing
🙏
Good useful video
Thanks for watching
Good👍
Thank u
still needs the board to make it work?
how i speed control to control 12v or 5v ?
Ela
Ela...
How do you keep it from turning off?
Switch
Understand thank you
Hi,
is it running continuously? When i'm trying to do, it stops after a few seconds.
You need to connect the sata data wire 3and 5 or 2 and 4 together
Yes I too observed it stops running after a while, shorting the pins 3 and 5 of data line is the solution
But i have a PATA what can i do
@@hemandhkrishnakk4847Same here, spins only for two minutes. Any solution yet?
I did everything exactly like you and it didn't work
Show
👋✔✔✔
that you are afraid to get your hands dirty you sleep in rubber too.
Thanks for watching...
Hi dear teacher. me somali . Which number ic to use teacher pls back massage number in sinsors .sorry teacher. Electro bro
7805
@@ELECTROBRO thanks bro