6 gen Celica GT build in 12 minutes

Поделиться
HTML-код

Комментарии • 112

  • @kaox44
    @kaox44 7 месяцев назад +5

    Beautiful car….stunning in motion.

  • @TheCheapskate78
    @TheCheapskate78 Год назад +26

    seeing people take my favorite car and making it look even better always puts a smile on my face. Great Job!

  • @coyotes_r_us
    @coyotes_r_us Год назад +6

    Celicas are so rare and slept on. Without the celica there is no supra 🙏💯🪶🪶🪶🪶 gotta remind folks how bad ass these cars are. I'm tryna get one too.

  • @paulosicne8498
    @paulosicne8498 Год назад +2

    Very nice man! This is my favorite generation of the Celica. I remember seeing a very clean red Celica GT manual, just like this model on Ebay Motors about 2 years ago and it only had 26K miles, and was only going for like $21K. It was out of state, but I kept returning to the ad because it was so clean and looked well taken care of. It only had one owner, no accidents, and was a west-coast car. The car sold like 2 days later. Ugh!

  • @Maplecook
    @Maplecook 2 года назад +4

    I have the same car...well, the starting point anyway. Yours is GORGEOUS. I'm so jealous!

  • @calebcortinacc
    @calebcortinacc 9 месяцев назад +1

    Bro I’m seriously inspired just got a 94 GT that needs alot of love. If only I knew a lick of what you knew. My dream would be to do an engine swap but that’s seems so beyond me 😭 your celica looks amazing!

  • @troyhodulik5542
    @troyhodulik5542 4 месяца назад +1

    This was a great montage! Loved it. Beautiful build.

  • @jarrodnaude3004
    @jarrodnaude3004 2 года назад +5

    Greetings from Australia, loving the videos mate, alot of your stuff will be very helpful to me when I move into my new place and actually have room to completely dismantle my 1992 Toyota Celica and get her looking good again even if yours is a 6 gen alot of the engine videos will come in handy. Thanks in advance for when I actually start the project

  • @GastónBonnat-b8x
    @GastónBonnat-b8x 4 месяца назад +1

    Love Your celica man! Great process BTW!

  • @SiqcCafeNyc
    @SiqcCafeNyc Месяц назад +1

    Very well put together video😁

  • @juliusgutierrez5280
    @juliusgutierrez5280 Год назад +2

    I have a 1998 Toyota Celica GT Convertible with the 2.2L 5SFE. Im still trying to upgrade it to this day but parts rare and super expensive. Great Celica you got, Im jealous lol

  • @i-legend-i7897
    @i-legend-i7897 Год назад +3

    Came out amazing, cool to see this car get the attention it needs

  • @winfield5205
    @winfield5205 4 месяца назад +1

    I have a red auto 94 GT I’d love to do a 3sgte swap with a 5 speed. Car looks awesome man gives me inspiration to keep working on mine

  • @Nickolision
    @Nickolision 2 года назад +1

    Aye nice seeing you at the junkyard! Looks awesome!

  • @gastonbonnat6420
    @gastonbonnat6420 10 месяцев назад +1

    Love that celica bro! Great work btw!

  • @antbymcnair4297
    @antbymcnair4297 11 месяцев назад +1

    It looks great. Nice work.

  • @Tecactually
    @Tecactually 2 года назад +7

    I love your build! Celica 6th gen is such a beautiful car. Just out of curiosity, how much has the build cost you?

  • @jdsosa879
    @jdsosa879 5 месяцев назад +1

    @CharlieXiong wow brother this looks amazing, I want to do something like this to my ‘95. My son is 12 so I have a few years to pass it on to him before I can build it. How much Am I looking forward to spend approximately. I’ve had mine for a few years now

    • @charliexiong6541
      @charliexiong6541  5 месяцев назад

      Hi, it really depends on what platform you are planning to build your celica. If you just want to make it look stock as possible, maybe sourcing out parts from part car or local junkyard if your celica is missing parts. If you're planning to get some power plus Celica st205 parts. It definitely will be expensive depends on where you buy the parts from. I collected my parts as far as 2015 so I were able to get the parts for less compare to now. Good luck with build.

  • @HarryHW99
    @HarryHW99 Год назад +3

    I love the whole process man! I was thinking of buying this '97 Celica that's been abandoned for 4 years already. I would say it's in pretty rough shape but I think it's fixable though. Should I get it? The price is around 1.2 grand.

    • @charliexiong6541
      @charliexiong6541  Год назад

      Hi, I would try to ask for a lower price if it’s negotiable and make sure the car has a good foundation to work with like no major rusts nor body damage

  • @Thishandleisunavailable493
    @Thishandleisunavailable493 2 года назад +3

    I look every day for one of these by me. One day I’ll find one. Anyone in New Jersey got one for sale that isn’t $20k or clapped out? Lol

  • @chaolor4632
    @chaolor4632 2 года назад +1

    Charlie is that you? Man we miss you guys in NC, love the celica! I'm have to get one

    • @charliexiong6541
      @charliexiong6541  2 года назад +1

      Hey bro, how you all doing. Yeah we missed y’all too. thanks for the compliment.

  • @magnusrylander
    @magnusrylander Год назад +1

    What a great build

  • @Swagway177
    @Swagway177 6 месяцев назад

    Im so satisfied to watching this

  • @hollywoodbuilt
    @hollywoodbuilt Год назад +1

    Love it bro keep up the good work!!

  • @dpsinoh
    @dpsinoh 2 года назад +1

    @CharlieXiong Have you replaced the speakers in a 6th generation Celica? I'm looking to upgrade the audio system in my 1998 convertible and can't find a replacement for the 4" midrange driver near the top of the door panel. I've found suitable replacements for the tweeters and lower door speakers. I want to keep the car looking as stock as possible.

    • @charliexiong6541
      @charliexiong6541  2 года назад

      I replaced the front door speaker from Best Buy long ago. Same size as oem so it will fit the door cards.

  • @redeye206
    @redeye206 2 года назад +1

    I’m building a 6th gen celica and I’d like to see where you found the parts of the body such as the rear and front splats and gr4 hood, wing

    • @charliexiong6541
      @charliexiong6541  2 года назад

      I bought the gt4 parts more than 5 years ago. Now It’s rare to come by plus when you do find the parts, it’s pricy. Look for stock and tuning on fb. The seller sells gt4 parts. Others can be found on eBay, gt4 play, celica tuning.

  • @mardicas
    @mardicas Год назад +1

    Good job! My thoughts "Damn, is he gonna keep the top mont intercooler?" few photos later "Good choice with FMIC". I have very similar build '97 GT, also the caldina swap with FWD. I still have not done the hood and front bumper, price is just too much these days. Did you keep the S54 transmission, has it held up well for you?

    • @charliexiong6541
      @charliexiong6541  Год назад +1

      Yeah, I kept the s54 tranny and it’s holding up well. Thanks

  • @ericdelacruz3011
    @ericdelacruz3011 2 года назад +2

    This is dope, I’m also planning to do the same. I have a 98 celica gt and want to slap together a 5sgte with the awd. But I have a long ways till I get there. Are you planning to do anything else with yours ? And how much power are you currently making ?

    • @charliexiong6541
      @charliexiong6541  2 года назад +2

      Hi, there are more things like like to do little by little. Next is to get a boost controller, maybe headers and bigger turbo, injectors before getting it tune and dyno. Right now hp is probably at stock 255-260.

    • @ericdelacruz3011
      @ericdelacruz3011 2 года назад +1

      @@charliexiong6541 that’s dope, can’t wait till those videos come out 😄

  • @Nebula-rx7bj
    @Nebula-rx7bj Год назад +1

    what kind of stuff did you have to change to have the motor work in the celica? or was it pretty much just plug and play

    • @charliexiong6541
      @charliexiong6541  Год назад

      Hi, the 3sgte dropped right in. You can reused the 5sfe motor mounts if it's still good or upgrade if you like. You will need the 5sfe and 3sgte harness to convert into a one plug and plug harness from Wire Gap. You will also need a hybrid clutch from PrimeDriven to make it work with the S54 tranny and axles or upgrade to the E153 Tranny and axles. Other cost are common maintenance or gasket overhaul but lowest cost to make it work will run you roughly $5k-$6k depends on parts.

  • @Spar10MG
    @Spar10MG 2 года назад +2

    Hey! What are the specs on the tires you're running? Great video by the way, can't wait to do my 3sgte swap

  • @luisfernandez1902
    @luisfernandez1902 2 месяца назад

    Which website did you buy the front bumper and hood from? Is that place still selling?

    • @charliexiong6541
      @charliexiong6541  2 месяца назад

      @@luisfernandez1902 hi, I bought the front clips from northwest jdm in Sacramento. Sometimes if you’re lucky, they may have the front clip you’re looking for. The last time I saw them have a gt4 front clip was pre-Covid.

  • @palmswanswan6781
    @palmswanswan6781 Год назад +2

    Love it

  • @jameshunt5935
    @jameshunt5935 Год назад +1

    Just wanted to ask how did installing the TRD wing work with the OEM spoiler being three spoke? trying to find a high rise spoiler for my 6gen but concerned about fitment and holes.

    • @charliexiong6541
      @charliexiong6541  Год назад +1

      Hi, to bolt on the trd spoiler. It requires the 94-95 trunk. 96-99 trunk will require drilling an extra hole on each side. Measure carefully before drilling, good luck.

    • @jameshunt5935
      @jameshunt5935 Год назад

      @@charliexiong6541 thank you so much 🙏

  • @krypthell
    @krypthell Год назад

    who did the seats? those are sick!

  • @davidpokorny2181
    @davidpokorny2181 2 года назад

    Greetings from Czech, could you tell me which rods did u use on the hood? i would like to do this on my Celica as well.
    Thanks

    • @charliexiong6541
      @charliexiong6541  2 года назад +1

      Please check my video regarding the hood struts. The information is on the description. Thanks.

  • @mnorman8227
    @mnorman8227 2 года назад +1

    Awesome !

  • @MrBruh-ow7nb
    @MrBruh-ow7nb 2 года назад

    Hey what suspension did you install in your car? Also what tools did you use? I just got a 99 Celica and i’m pretty excited to start modifying it. Also do you know any good short throw shifters and steering wheel for the car?
    -Thanks

    • @ericdelacruz3011
      @ericdelacruz3011 2 года назад +1

      He through in bc br coilovers and short shifters for this gen is hard to find. I only found 1 for mine and it was about 120 for it.

    • @charliexiong6541
      @charliexiong6541  2 года назад

      You can use 7 gen Celica short throw shifter. It’s been done by other celica owners, you may need minor modifications.

  • @ghxst-yt6511
    @ghxst-yt6511 5 месяцев назад

    where did you buy that facelift kit from?😭

    • @charliexiong6541
      @charliexiong6541  5 месяцев назад

      Bought the whole front clip 8 years ago from a jdm warehouse in Sacramento ca.

  • @devonjackson3304
    @devonjackson3304 Год назад

    how did you get the tachometer to work with the engine swap?

  • @hollywoodbuilt
    @hollywoodbuilt Год назад

    How straight foward was the 3SGTE swap? Anything to lookout for?

    • @charliexiong6541
      @charliexiong6541  Год назад +1

      Hi, the swap was very straightforward. Only thing to look out for is the harness. To save the headache, have wire gap convert the harness to a plug n play for you.

  • @Cruz0604
    @Cruz0604 Год назад

    Where did you buy all the parts

    • @charliexiong6541
      @charliexiong6541  Год назад

      Source it out through jdm warehouse, eBay, 6gc fb groups, celica tuning.

  • @romanandsilas
    @romanandsilas Год назад +1

    Same red as mine

  • @GastónBonnat-b8x
    @GastónBonnat-b8x 4 месяца назад

    Where did You get the hood shocks?

  • @CryptoEye68k
    @CryptoEye68k 2 месяца назад

    Bro, I have one. I’m from India, where can I find all these parts ?

    • @charliexiong6541
      @charliexiong6541  2 месяца назад +1

      Hi, you can find the Celica St205 parts on Ebay, Carbon Microsystem, Crazytuningfactory, Mobb Motorsport. FYI, these parts isn't cheap. Good luck.

    • @CryptoEye68k
      @CryptoEye68k 2 месяца назад

      @@charliexiong6541 Thanks bro! I'll check it out.

  • @Romedev
    @Romedev 10 месяцев назад

    Where i can find front lips?

    • @charliexiong6541
      @charliexiong6541  10 месяцев назад

      Type celica st205 on eBay or celica tuning website

  • @edmundsplaters5489
    @edmundsplaters5489 8 месяцев назад

    Do you have a paint code for this car?

    • @charliexiong6541
      @charliexiong6541  8 месяцев назад

      I don’t have the code but the paint color is call renaissance red. It’s the original color on this car.

  • @bruh8587
    @bruh8587 Год назад

    Which Tanabe springs did you use

    • @charliexiong6541
      @charliexiong6541  Год назад +1

      It's just Tanabe springs for the 6th gen celica I bought from Ebay but now I think it's discontinued. I personally think Tein S tech lowering springs is much better

    • @bruh8587
      @bruh8587 Год назад

      @@charliexiong6541 U still have your celica?

    • @charliexiong6541
      @charliexiong6541  Год назад

      @@bruh8587 yes

    • @bruh8587
      @bruh8587 Год назад

      @@charliexiong6541 Does it sound too crazy to put a 2jz gte engine in it?

    • @charliexiong6541
      @charliexiong6541  Год назад +1

      @@bruh8587 if you have the $, you can do any swap. It has been done before.

  • @welovegoru239
    @welovegoru239 11 месяцев назад

    how did you get all the parts so cheap

    • @charliexiong6541
      @charliexiong6541  11 месяцев назад

      Parts were found years ago before 2020. Back then parts were cheaper. Back then I found a mint gt4 bumper for $300 but didn’t buy because it’s 3+ hours drive away. Regret til this day l🥲

  • @ilvinmartinez1653
    @ilvinmartinez1653 9 месяцев назад

    where can i get that spoiler?

    • @charliexiong6541
      @charliexiong6541  9 месяцев назад

      eBay, look up celica st205 trd spoiler or on celica tuning website.

  • @DannyDavila-g4k
    @DannyDavila-g4k 10 месяцев назад

    Can this be done into an atumatic ?

    • @charliexiong6541
      @charliexiong6541  10 месяцев назад

      Hi, yes it can be done to an auto. The 3sgte comes in auto with an auto ECU. I'm just not sure if where to source out aftermarket parts to support an auto transmission in the US.

  • @carlcarlssonvlogs
    @carlcarlssonvlogs 2 года назад

    So you manage to install the whole GT4 engine and drivetrain to make it 4wd?

  • @Vollzer
    @Vollzer 2 года назад

    is it still FWD or did you manage to convert it to AWD?

  • @jvogler_art4708
    @jvogler_art4708 2 года назад

    Where the hell did you get the GT 4 body parts for 1200???

    • @charliexiong6541
      @charliexiong6541  2 года назад

      That was more than 5 years ago

    • @jvogler_art4708
      @jvogler_art4708 2 года назад

      @@charliexiong6541 Do you still have it? Amazing Celica. I gotta get one before its all scalped like everything these days.

    • @charliexiong6541
      @charliexiong6541  2 года назад

      @@jvogler_art4708 still have it 🙂

    • @charliexiong6541
      @charliexiong6541  2 года назад

      @@jvogler_art4708 its hard to find a clean one these days with a 5 speed. Good luck.

  • @cheenouyang2945
    @cheenouyang2945 2 года назад

    Where you get the whole front clip frm?

    • @charliexiong6541
      @charliexiong6541  2 года назад +1

      Northwest jdm in Sacramento but that’s more than 5 years ago.

    • @cheenouyang2945
      @cheenouyang2945 2 года назад

      Nice I like wat u doing to urs im planning to do wat u doing with mind too...is it plug and play with the 3sgte anything I should know about..and urs still a front wheel drive right?

    • @charliexiong6541
      @charliexiong6541  2 года назад +1

      @@cheenouyang2945 Yes still front wheel drive but very fun and have plenty of power. The swap is very straight forward. Engine mounts is the same. The only thing that needs to be work on is the harness. Send the 5sfe and 3sgte harness to WireGap to convert into one plug and play harness. New fuel pump to be compatible with the 3sgte. Other than that, you can very much used a lot of the parts from your 5sfe engine such as tranny, axles, vacuum hoses, fuel lines, power steering pump, etc..If you have been following my videos, there are many things in the content that very much give you enough information to do the swap. Anything you're unclear of, feel fee to reach out to me.

    • @cheenouyang2945
      @cheenouyang2945 2 года назад

      Thanks bro really appreciate the info

  • @raiszaman515
    @raiszaman515 2 года назад

    Hello i have a 95 celica with a gt4 bumper, bonnet and spoiler, however the engine is the 115hp 2.0 non turbo and it is blown, so need a new engine anyway, does anyone know will the gt4 engine be an easy swap in and what gearbox to pair it with as mine i plan to keep fwd? The reason why i decided not to just buy a gt4 is the current price and because i already have a celica shell that needs and engine anyway, any help would be appreciated

    • @vibrantsy
      @vibrantsy 2 года назад

      7afe? that’s the 115hp engine, it’s a 1.8l tho. if you have the 2.0l you’re closer to 170hp. with the 7afe you need a different fwd transmission, the s54 from the gt or the e153 from a v6 camry/solara or a modified mr2 one. if you get one of those, you’ll just need to order a clutch kit (southbend is the goto place, tell them what engine and transmission and they’ll send you the right kit) and then you’ll need 2.2/2.0 motor mounts, the ones from the 1.8 7afe are different. apart from that, you just need wiring, which can be done yourself although most people choose to send off their harnesses and receive a plug and play one

    • @raiszaman515
      @raiszaman515 2 года назад

      @@vibrantsy thankyou so much this is extremely helpful, the car is currently in a garage being stored and hasnt been looked at for a while, so i will confirm the details myself, that was just what the previous owner had told me, so if i understood correctly, if its is the 2.0 engine the gt4 engine is a streight swap as the gearbox and engine mounts should line up, however if it is the 1.8, ill need new engine mounts and a gearbox from one of the cars mentioned in your comment, and wiring and ecu is ofc different for both but that should be fine, i also have another quick question, in the uk there seems to be 2 variants of the N/A 2.0 engines, 140bhp and 170bhp but in terms of engine swap to the gt4, they are the same right? In terms of motor mounts and gearbox? Thankyou for the help i really apprecate it

    • @vibrantsy
      @vibrantsy 2 года назад

      @@raiszaman515 i’m not sure. there is the celica ST that has the 7afe 1.8l(116hp), and the US spec celica GT that has the 2.2l 5sfe (that makes around 140hp, but i don’t think this engine comes in the uk) and then the 2.0l 3sge (170hp) which is the GT celica engine everywhere but the US. if you have a GT, i.e. the 2.0 or 2.2, then you will already have mounts and a proper manual transmission.

    • @raiszaman515
      @raiszaman515 2 года назад

      @@vibrantsy ah i understand, thankyou so much for your help, ill find out the actual spec of the car and hopefully be able to make a nice engine swap

    • @mardicas
      @mardicas Год назад

      @@raiszaman515 FYI: If you go with e153 transmission then you will also need axels. I kept the S54 so far works just fine and if it ever breaks then its a lot cheaper to replace than an e153. If you can go for the gen4 3sgte from a caldina(never offered in a gt4, they only had until gen3). It gives you COP setup from the go and higher boost stock. If you want crazy power then swap the rods and pistons before you swap it. I have kept mine stock and very happy with it.

  • @eddierodz6974
    @eddierodz6974 2 года назад

    Cuanto dad? $$$$?

  • @TxbiVisuals
    @TxbiVisuals 6 месяцев назад

    Do you have instagram?