Can we please get a "shopping with Aaron" or "braille goes shopping" series? You guys are a riot in stores. You never know exactly what you want or need, but when you find it, mwah, chefs kiss, its priceless.
I used to watch you guys years ago, then life got busy. It makes me happy that you guys are still goofing around with board ideas! keep having a blast.
Used to be a big fan of this channel when I was like 11 , haven’t skated since and just recently picked a board up and plan on skating again , love the channel , thanks for bringing me back to skating
As dangerous as the home depot run was, this is ironically the most careful I've ever seen Aaron. He made sure the ends were straight, and used washers! There is hope!
Idea💡Screw in metal rails on both edges!!! Not only will it add rigidity but also JD can frontside air to 50-50 from the quarter pipe on to the longboard as Aaron does a rock n roll!!!
Suggestions? Def add clearance... Flip the trucks onto the "top" ride it "upside down". Make it more rigid, Add thin strips of wood (1/2" 3/4") perpendicular to the top of the deck, running parallel with the length of the board. Run a center line on the board & ends, match them up with the lines on the hardware to make sure it's running true. You also could possibly pre warp the board so that it is arched in the center. Soak board in water, let sit for a few hrs, Put on half pipe with weight, or clamps to get the slight bow, or just look for one of the several you may find at HD. lol. Great & fun video, thanks for all that you do.
these I are the kind of videos I love! Making a really dumb idea come true. After couple of minutes watching I'm getting more and more interested about the end result! big love
Flip the board over and put trucks on other side of template - with the thickness of the template, you already have most of the riser you may need already -super simple fix - stay awesome out there Braille Team!!
Every braille episode is and epic one. Yall have the best jobs in the world. Who doesn't like to have fun while they work and goof off. And I don't really watch any other skateboarding channel on youtube to be honest. Cause they're just not as fun for me. Yall are so CREATIVE!😊
You need to reduce the friction on the underside. Wax it up, and maybe put three skid plates on the places it gets the most wear, in the middle where it sags and at the ends where it scrapes ledges. If you're feeling really handy, make sure those plates are flush with the wood so they don't catch on ledges.
@@brailleskateboarding I think you guys should do the 16ft one but you get 16ft angle iron and bolt it to the wood so it doesn’t flex or bend then grip it
Khayri at 11:37 rollin in on that drift trike like he owns the place 🤣 Better watch out AK, somebody's has their eye on that 7-ply golden throne my guy!
Use steam (water and heat and maybe like big towels) to shape the wood. Since the wood wants to arch down because of the weight on it give it an arch up to counteract it and also give it a chance of clearing obstacles in the middle.
Nigels reaction to aaron going to home depot instead of across the street was hilarious😂😂. And the show you guys were talking about was called extreme makeover home edition
Flip it upside down and put trucks on the other side and also put a third truck in the middle to support the middle weight, could even use the longer board that way
To prevent it from touching the ground you can bend it in the middle. like it's an arch. To do so, you can wet it up with a lot of super hot water, bend it, hold the position until it's dry. You may have to use something with several attachment points to hold the curve and not only one (so it looks more like an upside down U and not an upside down V. OR, wasn't it possible to invert the position of the attachment piece and the long wood. (from bottom to top : trucks - tail or front piece - superlongwood) Super fun
I was watching a video where Gabe was talking about playing skate through a wrong number text, and it gave me an idea. A worldwide game of skate, where you have to submit the footage of a landed trick before the deadline(e.g. 30 min for each set). I think multiple tries would lead to people pulling off some insane tricks and pushing boundaries, making it difficult in a way that’s different from a normal game of skate.
Duuude .. at the 7:40 mark the only thing this video has left me thinking is what if somebody ran into the end of those boards sticking out of your prius, it would have drove it clean through the dash and it would have probably shattered the air intake on top of the engine. You guys are nutz! Lol
Would have been worst if they clipped it from the side and it hit into one of you 😬 love braille and all the stress you put me through 🤣👌 glad it all worked out 👏 loved the vert ramp bit, almost like a carnival ride once you get it going and jump on.
FYI '2x' lumber is the dimension before its milled from rough lumber. So a '2x8' is actually 1.5" x 7.25". Just google lumber 'nominal vs actual dimensions' to look up a chart.
Petition to turn Braille Army channel into Braille After Dark where the guys dont have to censor themselves and they just skate. Invite homies to come skate or go to other parks
I made my own 6 foot longboard a long time ago carved a deck shape from some strong plywood set it up with Indy 215s and Xtreme 99mm street slicks took to get moving took some mussel ... stopping took some tread
i was thinking, for another video, attach 1 more trucks at the middle. let it roll on a straight path, then u guys line up on both sides waiting for it like it's a train and you're trying to hitch a ride but the longest board don't stop, you guys then try to get on by doing tricks, nose grind maybe, but of course i don't think it would grind as the "train" is moving, but it's a way to get on. and with the power of friendship, you all ride together. friends that skate together...might get bodied together, so BE CAREFUL if you ever consider this. it might be difficult and dangerous, but it could be fun 😁
Just remembered that I have a skateboard I bought awhile ago and you guys have convinced me to start riding again! Hopefully gonna just get more used to it this summer and do some street stuff
Funny idea😂 I bet it would work way better if you add another set of trucks and wheels in the center of the board that way the middle of the board won't drag👌🤙🫵👍
During the assembly, has really noone thought about putting the plank ontop of the tail and nose, instead of below? So the plan is higher up and has more space to bend naturally, instead of using rizers
Instead of having the wheel adaptor over the long board try putting it under it, even though the picture has it over. With the center bowing you lose too much height from the trucks. Also by bolting the wheel adaptor over the board you are introducing a pivot point based on the bots holding the things together. When the adapter is in the over position it only use the bolts for strength. If the adapter is in the under position you still have the pivot point at the bolts but the wood of the adapter is also pushing up against the board making the connection point stronger.
please try the vert ramp with this longboard again with two of you guys standing on each side and pump on upsides of the ramp like your each a leg on a regular board
Nigel’s reaction to Aaron driving back with the wood sticking 10 feet out of the back 😂😂
9:49 😂😂😂
"YOU DID NOT DRIVE FROM THE STORE LIKE THAT!!"
this would be a long board. fk thisa youtuber
Lo peor es que tenía otra tienda en la esquina 😂😂😂
Ain’t no way you did that bro.. in a what??
Can we please get a "shopping with Aaron" or "braille goes shopping" series? You guys are a riot in stores. You never know exactly what you want or need, but when you find it, mwah, chefs kiss, its priceless.
Love it yes
Lowes is better.
yall should defenely do this!!
Turn the board upside down and put the trucks on the other side, that gives you more ground clearance
This is immediately what i thought as well!
i was yelling at the screen the same exact thing haha
Set of trucks in the middle
Also a T of angle-iron down the middle would get rid of most of the flex
The Guys: "Kickflip it!"
The Kid: **tries**
Absolute gold, best part of the entire video.
Chaos, but reaching non skaters and inspiring them to skate because of its absolute hilarious-ness! Like Aaron intended.
The best Idea of a long time, how could no one think of this fantastic idea?🔥🔥
Poser
What if we put the wheels on the opposite side? I guess the board will feel stable too
would raise the middle section up so it wouldn't scrape as easily, ya.
thats what i thought the whole time why didnt they just do it
Was thinking this as well...
My thoughts too
Flip the board!
I used to watch you guys years ago, then life got busy. It makes me happy that you guys are still goofing around with board ideas! keep having a blast.
Used to be a big fan of this channel when I was like 11 , haven’t skated since and just recently picked a board up and plan on skating again , love the channel , thanks for bringing me back to skating
Glad to see Aaron's transition skills in today's video. Always a treat to see a master at work.
Khayri is awesome every time he's on. Keep that kid coming around!
That is the plan
i wanna see two people riding but with both people pushing. i wonder if u can get going fast. tandem skateboard would be really neat
It makes me happy to know Aaron uses his blinkers (turn indicators/ indicator lights/turn signals)
Yes
As dangerous as the home depot run was, this is ironically the most careful I've ever seen Aaron. He made sure the ends were straight, and used washers! There is hope!
Idea💡Screw in metal rails on both edges!!! Not only will it add rigidity but also JD can frontside air to 50-50 from the quarter pipe on to the longboard as Aaron does a rock n roll!!!
Suggestions? Def add clearance... Flip the trucks onto the "top" ride it "upside down". Make it more rigid, Add thin strips of wood (1/2" 3/4") perpendicular to the top of the deck, running parallel with the length of the board. Run a center line on the board & ends, match them up with the lines on the hardware to make sure it's running true. You also could possibly pre warp the board so that it is arched in the center. Soak board in water, let sit for a few hrs, Put on half pipe with weight, or clamps to get the slight bow, or just look for one of the several you may find at HD. lol. Great & fun video, thanks for all that you do.
That thumbnail is legendary! Can tell this gonna be a great video
Videos like these are so ridiculous but so entertaining, although been loving the more skate focused videos too!
Thanks!
these I are the kind of videos I love! Making a really dumb idea come true. After couple of minutes watching I'm getting more and more interested about the end result! big love
Flip the board over and put trucks on other side of template - with the thickness of the template, you already have most of the riser you may need already -super simple fix - stay awesome out there Braille Team!!
Thanks for the tips!
OK.see. This /These are the reasons we luvLuvLuV Braille & their ideas /creativity 🎉🎉🎉
Thanks a million. What should we make next?
Seeing Nigel’s reaction to all this literally just makes my day 😂🤘 cheers fellas
when gabe said we dont have anything to tie it down with . i died thnking you could go to homedepot. then Nigel!!! hahahaha best vid ever
Thanks so much haha
Where’s jd when we need him!?!!?
Shouldn't the trucks be on the other side so it's further off the ground?
Every braille episode is and epic one. Yall have the best jobs in the world. Who doesn't like to have fun while they work and goof off.
And I don't really watch any other skateboarding channel on youtube to be honest. Cause they're just not as fun for me.
Yall are so CREATIVE!😊
Thanks so much ❤️
You need to reduce the friction on the underside. Wax it up, and maybe put three skid plates on the places it gets the most wear, in the middle where it sags and at the ends where it scrapes ledges. If you're feeling really handy, make sure those plates are flush with the wood so they don't catch on ledges.
Good idea
@@brailleskateboarding I think you guys should do the 16ft one but you get 16ft angle iron and bolt it to the wood so it doesn’t flex or bend then grip it
Khayri at 11:37 rollin in on that drift trike like he owns the place 🤣 Better watch out AK, somebody's has their eye on that 7-ply golden throne my guy!
Lets do it
Try mounting the trucks on the otherside of the board for max ground clearance! And maybe throw some ALL Terrain wheels on it and take it off road!
Lets go
When you guys said centering the board that’s a 1/4 larger so it is only 1/8 on both sides. I was so proud of you guys
We are learning I guess haha
Glad you guys are popping into my recs again.
Use steam (water and heat and maybe like big towels) to shape the wood. Since the wood wants to arch down because of the weight on it give it an arch up to counteract it and also give it a chance of clearing obstacles in the middle.
Good call
You could just connect a ratchet strap in between both trucks and tighten
I love how Gabe has to gently explain to Aaron how lumber and measuring works.
Nigels reaction to aaron going to home depot instead of across the street was hilarious😂😂. And the show you guys were talking about was called extreme makeover home edition
Those vert clips were strangely satisfying.
Right!? I thought we nailed it
11:02 the look on Deriks face nearly killed me 😩😂
Also fun fact, pausing 11:03 makes Derik and Nigel look like evil masterminds 🤣
Liked the editing and longer format in this video. Feels like an episode of a tv show.
Aaron needs a truck 😂😂
I can't believe Aaron actually drives a Prius 😂😂😂😂
watching you guys sketchily load that wood into the prius made me so nostalgic for when my friends and I would build practice rails in highschool
this is crazy and funny board to see Braille
this reminds me of the You Make It We Skate It Series. thanks for uploading this Aaron.
That thumbnail. 🤩
You definitely need to nail a short rail onto the longboard.
Good idea!!
Flip it upside down and put trucks on the other side and also put a third truck in the middle to support the middle weight, could even use the longer board that way
That 'cruzing' pun works as a triple! Namely, to keep making puns!
Lets go
I am a Braille Army Plus Memeber!! And its awesome!!
That looks like so much fun in the vert ramp! I would try to tame that beast.
Bro tryin to do peace sign ended up stickin the finger😂
Need to try putting the end wooden pieces on the underside of the 8 footer. That would get the deck a little higher so it wouldn't drag as much. Maybe
Ripstik + Apple Wheels. Patiently waiting
this channel is restoring faith in humanity dude
To prevent it from touching the ground you can bend it in the middle. like it's an arch.
To do so, you can wet it up with a lot of super hot water, bend it, hold the position until it's dry. You may have to use something with several attachment points to hold the curve and not only one (so it looks more like an upside down U and not an upside down V.
OR, wasn't it possible to invert the position of the attachment piece and the long wood. (from bottom to top : trucks - tail or front piece - superlongwood)
Super fun
one of the best videos in a long time
He gave a full attempt on that kickflip. I spit my water out my nose that was so funny XD
I was watching a video where Gabe was talking about playing skate through a wrong number text, and it gave me an idea. A worldwide game of skate, where you have to submit the footage of a landed trick before the deadline(e.g. 30 min for each set). I think multiple tries would lead to people pulling off some insane tricks and pushing boundaries, making it difficult in a way that’s different from a normal game of skate.
Yes Jonny Giger did this. I think it was called global game of skate. He asked me to do it. I should shouldnt I
When you guys are doing the rail bit, I keep hearing the Three Stooges theme song playing
Like you guys are going to biff it but don't 😂
If we wouldn’t get a copyright strike we would totally use that song a lot in these videos 😂😂
@@brailleskateboarding that's awesome 😂
I swear I love Arron so much
Duuude .. at the 7:40 mark the only thing this video has left me thinking is what if somebody ran into the end of those boards sticking out of your prius, it would have drove it clean through the dash and it would have probably shattered the air intake on top of the engine. You guys are nutz! Lol
Love braille been subbed for as long as I can remember y’all should make a vid/compilation of braille’s worst falls.
We have several! This one is my favorite ruclips.net/video/rhrank4FhFA/видео.html
I just need tandem skating in my life!
Me too
Would have been worst if they clipped it from the side and it hit into one of you 😬 love braille and all the stress you put me through 🤣👌 glad it all worked out 👏 loved the vert ramp bit, almost like a carnival ride once you get it going and jump on.
This is one of the best ones you've made
Might I recommend small roller pins type thing for the middle so it rolls when it scratches floor
Get some bearing casters and put a few on the bottom. Maybe put the trucks on the other side to get more height.
FYI '2x' lumber is the dimension before its milled from rough lumber. So a '2x8' is actually 1.5" x 7.25". Just google lumber 'nominal vs actual dimensions' to look up a chart.
That thing was like one of those Viking ship carnival rides when it was on the vert ramp! 😂
Hahahahahahaha so true
Petition to turn Braille Army channel into Braille After Dark where the guys dont have to censor themselves and they just skate. Invite homies to come skate or go to other parks
Ok lets do it
Now that is the definition of a real long board.
I love Braille!!
Board upsidedown. Dumbbies!! Gabes like Yes TELL ME MOORRE?!
You know that’s almost as long as- nah just messin’ with ya guys that’s cool asf bro 😂 love you guys ❤️🔥
nigel def hit the vert ramp harder than he expected right there lol 23:38
For sure
I made my own 6 foot longboard a long time ago carved a deck shape from some strong plywood set it up with Indy 215s and Xtreme 99mm street slicks took to get moving took some mussel ... stopping took some tread
Sounds amazing
"so slow" ...lol so fun\
thanks gabe
❤️
That was a really fun video to watch!
glad to see this video is doing so well!
Aaron should build houses from these 😂
Hahahaha
extreme home makeover lmao! Move that bus!
Hahahaha
i was thinking, for another video, attach 1 more trucks at the middle. let it roll on a straight path, then u guys line up on both sides waiting for it like it's a train and you're trying to hitch a ride but the longest board don't stop, you guys then try to get on by doing tricks, nose grind maybe, but of course i don't think it would grind as the "train" is moving, but it's a way to get on. and with the power of friendship, you all ride together. friends that skate together...might get bodied together, so BE CAREFUL if you ever consider this. it might be difficult and dangerous, but it could be fun 😁
"Wheres the long one?"
"In my pants 😅😂 "
Aaron :Be Honest Do It Look Cool Or Not ❓
Gabe : Nah ‼️😂😂😂😂
When Aaron said “ we arrived at the greatest store in the whole world” i thought he was gonna say BUNNINGS WAREHOUSE 😂
Maybe put the two pieces on the bottom instead of top, then you can add two more sets of trucks and some risers in between. 4 Truck long board
Hmmmm
My favorite kind of deck a drop down!
Just remembered that I have a skateboard I bought awhile ago and you guys have convinced me to start riding again! Hopefully gonna just get more used to it this summer and do some street stuff
Funny idea😂 I bet it would work way better if you add another set of trucks and wheels in the center of the board that way the middle of the board won't drag👌🤙🫵👍
The 10 ft of wood sticking out the back, that would totally be me, just winging it and hoping for thr best 😂🙏🏻
Watching you guys at Home Depot is like watching me on a skateboard lol
@17:42 the wood grinding on the floor sounds like a Transformer transforming lol
Braille! We can’t handle much more! Skateboarding was never meant to go so hard! 😭😂
During the assembly, has really noone thought about putting the plank ontop of the tail and nose, instead of below? So the plan is higher up and has more space to bend naturally, instead of using rizers
Instead of having the wheel adaptor over the long board try putting it under it, even though the picture has it over. With the center bowing you lose too much height from the trucks. Also by bolting the wheel adaptor over the board you are introducing a pivot point based on the bots holding the things together. When the adapter is in the over position it only use the bolts for strength. If the adapter is in the under position you still have the pivot point at the bolts but the wood of the adapter is also pushing up against the board making the connection point stronger.
Lov the road trips!!🤌🏼😂🤣😂🤣😂🤣
Semi truck flatbed trailers are naturally convex so when you load it with weight, it stays level.
Fascinating
This is when Removable, Strap Down Surf Board racks come into play... I've carried unimaginable things with them when is was broke and driving a Neon.
For sure
Camber the bottom edges for cornering and add a caster in the middle
Gabe.... 23:07, I had the same "jump on it!" outburst....mine just subbed "it" with "that muhfuhg**"
So good hahaha
Drop in on the loooong board! That’s all i wanna see now
please try the vert ramp with this longboard again with two of you guys standing on each side and pump on upsides of the ramp like your each a leg on a regular board
Y’all got a NICE longboard there.
Why thank you