Thanks for the compliment Mate.. Cheers 🍻 Yes I’ve broken enough arms to make 2-3 sets of 5T’s 😂 going to test out the turtle arms and see how much longer they last.
@@Dan-em9sk Hey Dan your post is appreciated and perfect timing! After 13 tanks my centre/front Dog bone pins are half way eaten and the front diff drive cup facing the centre diff will need replacing.! The front diff drive cup that holds the centre/front Dog bone is the worse, what's the best upgrade for that, Film doesn't make one from what I've seen
I would double check your screws on the drive gear side, I have found that the Loctite does not work unless you clean the allen bolts of the machining fluid and also make sure no diff fluid contamonates the screws as again I have had screws back out as the Loctite did not hold has happened to me twice one when using the branded LOSI fluid the Kraken-RC fluid along with other brands I always use the Loctite brand of Red, Blue and the Green bearing glue.
Hey mate, which charger and receiver LIPO do use? . are you making a video on LIPO'S and chargers? im new to this and not sure where to store it, charge it etc
I currently use the Hitec mini charger/balancer. Battery my first one and that I still use, is the factory Dynamite Lipo battery and now just tested and approve the Pulse 5000 mAh battery. They last a long time. Store in a lipo bag and in a cool area. I keep mine in my room wheee my truck sleeps 😂. The garage gets to hot for batteries and will possibly make them fail faster due to temps. The instructions on the battery info will tell you storing temps. Cheers 🍻
Excellent video mate, nearly 1000 subs and very well deserved! Have you broken any arms on your Losi 5t 2.0? I heard it's a weak point?
Thanks for the compliment Mate.. Cheers 🍻 Yes I’ve broken enough arms to make 2-3 sets of 5T’s 😂 going to test out the turtle arms and see how much longer they last.
@@largescalercnation I just found the turtle ridgeback arms at DDM, are they stronger?
I have never broken mine. I have changed them a few times. Especially the rears. Only cuz they get a pretty bad sand blasting from all the kick up
Modified rc booted brakes really extend the life of the cups and pins. Try them out with the flm forever cups
@@Dan-em9sk Hey Dan your post is appreciated and perfect timing! After 13 tanks my centre/front Dog bone pins are half way eaten and the front diff drive cup facing the centre diff will need replacing.! The front diff drive cup that holds the centre/front Dog bone is the worse, what's the best upgrade for that, Film doesn't make one from what I've seen
Thank for taking the time to make this video. I’m ready to do mine now
Awesome! Thanks for the support and watching 👍💯🔥👊👊
I would recommend synthetic grease in the bearings after cleaning them, not just thin oil.
looking shiny, loving that MOD lightened 62t spur. Awesome sauce bruv
Thanks Uce 👊😎
I would double check your screws on the drive gear side, I have found that the Loctite does not work unless you clean the allen bolts of the machining fluid and also make sure no diff fluid contamonates the screws as again I have had screws back out as the Loctite did not hold has happened to me twice one when using the branded LOSI fluid the Kraken-RC fluid along with other brands I always use the Loctite brand of Red, Blue and the Green bearing glue.
Great video, shaking a lot there mate, to much caffeine?
That’s exactly it ☕️🍻😂🤣 Cheers Mate!
Very informative thank you.
muss ich auch machen deine video is sehr nice
Look not bad to work on it! 👍🏻
This aluminum case will also work on the front and rear diff at the Losi 5ive-T 2.0?
Hey mate, which charger and receiver LIPO do use? . are you making a video on LIPO'S and chargers? im new to this and not sure where to store it, charge it etc
I currently use the Hitec mini charger/balancer. Battery my first one and that I still use, is the factory Dynamite Lipo battery and now just tested and approve the Pulse 5000 mAh battery. They last a long time. Store in a lipo bag and in a cool area. I keep mine in my room wheee my truck sleeps 😂. The garage gets to hot for batteries and will possibly make them fail faster due to temps. The instructions on the battery info will tell you storing temps. Cheers 🍻
Remove the dog bone pen and reinstall it so that the round section is "working".