i followed this other tutorial where he said "his was used up so you can just add pressure or use a tool to pry it up" which only ended up in the piece that holds the slide to break and i had to get a new one. it's nice to see you didn't leave out the detail i spotted after his video about the 2 grooves there is in the slide
Very helpful vid, thank you. I was trying to get the slide off and it just was jammed stuck, but your explanation on the two nudges made it all good again :)
Hi. I tried to disassemble my airsoft pistol (M1911) and when I got the pint out it just got stuck. I mean it wouldn't move forward. Is there anything I can do??
Nice I have a KWC 1911 Co2. When my gaz was empty there is a bbs inside the barrel. I slide up after I pull off the mag, but is still inside. Does we can remove it without dissembled?
Hey max. On airsoft global I needed help knowing which shipping option I needa choose. I'm ordering to California and I believe that it's "United States - Puerto Rico" but I'm not sure
Remove front first. The barrel bushing and top for the slide spring. Then slide back to remove. You won't have to hold the slide then. Thats how I do it on my real 45 Springfield Garrison. This gun is built just like a real 1911 just with a tiny barrel and less clutter in the back because with real you got a fairly large bullet that fits in.
I am having trouble getting the pin out or to even budge. I took the mag out, pulled the slide back and did everything I could, is there anything I can do to troubleshoot this?
Could be, I have the exact issue with this one now, it’s a bad valve in the mag, it does not charge the gas correctly and only takes in enough to fire one or two shots. You can try getting a new mag to test that theory, if its not that, check that everything else engages like the trigger, hammer, etc, then check the blow back housing unit, make sure none of the piston springs are missing or bent.
You just have to push one pin out in your hop-up assembly which is at the back of the barrel’s terminal end. Once you do that there is one spring you won’t want to lose as well as the wheel that adjusts your hop-up but your outer barrel will just slide off.
@@GeoGamerSandrika Its either not blow back (where the slide doesn't move) and doesn't disassemble like this one or you bumped your safety because the safety near your thumb also blocks the slide at the rear cutout and would prevent you from pulling the slide back.
@@jakegarrett8109 I know wherr safety part is. its not blocking the way. the slide is going half way back but not fully and I want to solve this if u can help me .
@@GeoGamerSandrika I wonder if it's a half blow back model? Some airsoft have the slide only travel half as far so they waste less gas, but I don't know how common those are. Id recommend searching your exact model and manufacturer to see if someone has a video on it specifically (mine is an Army Armament R30, which is a popular bidget model but I was never able to find a video on the slide internals disassembly for it but I did find videos showing how to remove the slide assembly at least). I'm not an expert on these, and it sounds like it wasn't as simple as I thought it might be with the safety, so the next advice would be to hold it in all orientations (up/down/sideways) and jiggle the slide gently to see if it will come loose if it's catching or hanging on something.
1911 master race
Agreed
Glocks and 1911s are both epic
Probably self explanatory to some but this video should have way more likes. Very helpful.
Thanks. Much better than the others that I looked at.
thank you, very simple and educational
Cool shirt! Still got mine from the 90's
Thank you so much this video was awesome I recently bought the suppressed pistol from the Hitman games and had no idea how to strip it, many thanks
thank you for your comment! Anytime.
thanks, I needed that. Now I know why I always struggle a ltttle with ours.
Watching this while trying to fix my cz75 sp01 after putting 3 mags down range. Should have got a 1911 :(
Thank you, really useful.
Glad it helped, thanks for watching!
very useful video!!!
i followed this other tutorial where he said "his was used up so you can just add pressure or use a tool to pry it up" which only ended up in the piece that holds the slide to break and i had to get a new one. it's nice to see you didn't leave out the detail i spotted after his video about the 2 grooves there is in the slide
Very helpful vid, thank you. I was trying to get the slide off and it just was jammed stuck, but your explanation on the two nudges made it all good again :)
max absolutely love your videos , keep it up. if you need any channel art or stuff like that hmu
thanks man ! I will definitely let you know. Been looking to possibly change somethings .
Hi. I tried to disassemble my airsoft pistol (M1911) and when I got the pint out it just got stuck. I mean it wouldn't move forward. Is there anything I can do??
Nice I have a KWC 1911 Co2. When my gaz was empty there is a bbs inside the barrel. I slide up after I pull off the mag, but is still inside.
Does we can remove it without dissembled?
Hey max. On airsoft global I needed help knowing which shipping option I needa choose. I'm ordering to California and I believe that it's "United States - Puerto Rico" but I'm not sure
Thx it really improved are 1911 co2 powered by gun
Remove front first. The barrel bushing and top for the slide spring. Then slide back to remove. You won't have to hold the slide then. Thats how I do it on my real 45 Springfield Garrison. This gun is built just like a real 1911 just with a tiny barrel and less clutter in the back because with real you got a fairly large bullet that fits in.
The whole grip and handle comes apart as well as the beaver tail hammer trigger it can all break dowm
My gun won’t fire I have lubed it and put green gas in but when I do fire it the bullets drop out I don’t know what to suggest and it’s left me upset
What kinda of 1911 is this and where can I buy it
👍🏻👍🏻👍🏻
I am having trouble getting the pin out or to even budge. I took the mag out, pulled the slide back and did everything I could, is there anything I can do to troubleshoot this?
Make sure you don’t pull the slide all the way
Using a pencil worked for me, the button didn’t quite push the pin far enough out
I usually have to push the pin in on the one side, then using my fingernails I pull the slide catch from the opposite side
hay +max cherepenin please add music in background I love your vids keep it up please more glock video
i actually used to in my older videos. Also going to be placing an order for more tomorrow or next day !
+Max Cherepenin cool I have watched you for awhile I will be getting a we g17 or g42.
My Remington 1911 RAC stops shooting after 1 BB. Is there something wrong with Mag you think?
Could be, I have the exact issue with this one now, it’s a bad valve in the mag, it does not charge the gas correctly and only takes in enough to fire one or two shots. You can try getting a new mag to test that theory, if its not that, check that everything else engages like the trigger, hammer, etc, then check the blow back housing unit, make sure none of the piston springs are missing or bent.
Can someone tell me where the tiny spring goes
You forgot to taken down the handle and trigger hammer beaver tail etc.
If you want a rail for it get a recover tactical grip
Can you make a video of this gun on how to remove inner barrel pls! Cause I wanna change my outer barrel the one without the orange tip
with out the orange tip it will be seen as a live pistol.
you could be fired at by police !
You just have to push one pin out in your hop-up assembly which is at the back of the barrel’s terminal end. Once you do that there is one spring you won’t want to lose as well as the wheel that adjusts your hop-up but your outer barrel will just slide off.
Took me a bit but got it down
Fuck yea, Pantera
I can’t find anywhere that sells a new barrel spring
YOu can maybe contact the manufacturer to see if they can sell individual parts.
Got my hands dirty but got the inner cleaned up it was very dirty😤
Always good to keep ‘em cleaned up! 👍🏻
Can someone help me ? I can't do reload to remove the little pin from the side. it gets stuck immediately when I pull back to reload.
I mean 2:00
@@GeoGamerSandrika Its either not blow back (where the slide doesn't move) and doesn't disassemble like this one or you bumped your safety because the safety near your thumb also blocks the slide at the rear cutout and would prevent you from pulling the slide back.
@@jakegarrett8109 I know wherr safety part is. its not blocking the way. the slide is going half way back but not fully and I want to solve this if u can help me .
@@GeoGamerSandrika I wonder if it's a half blow back model? Some airsoft have the slide only travel half as far so they waste less gas, but I don't know how common those are. Id recommend searching your exact model and manufacturer to see if someone has a video on it specifically (mine is an Army Armament R30, which is a popular bidget model but I was never able to find a video on the slide internals disassembly for it but I did find videos showing how to remove the slide assembly at least).
I'm not an expert on these, and it sounds like it wasn't as simple as I thought it might be with the safety, so the next advice would be to hold it in all orientations (up/down/sideways) and jiggle the slide gently to see if it will come loose if it's catching or hanging on something.
@@jakegarrett8109 can u tell me your email? so I can contact u and maybe we can figure it out. if u dont mind🙄
Can i do this with plastic pistol?
depends as some plastic pistols do not field strip like a GBB pistol.
Do you oil this gun if so where
Yes, mainly some of the areas that see the most friction. But really depends on how much you use it.
Algorithm 👍
My slide won’t pull off when the pin is out. What do I do!??!??!!??
Well it should just slide off, if you took out the mag. Are you having issue with getting it back on?
Max Cherepenin lol I don’t think I took the mag out XD thanks man!
do an assembly videos i can get it appart cant get it back together just fucking put it together
Thanks nigga 🙏🙏🙏🤝🤝🤝
4:54 what is the name of that part, I need to buy a new one and I don't know the name of it.
If I am at the right point, the camera is showing the blowback housing.
Idol bigyan mo Ako ganyang 1911 idol Kasi maraming daga Dito sa aming Bahay aming Lugar ayy casojong talisay city
k kool lol
yes
k lol
iMovie
didnt work , followed every step and it broke
The whole grip and handle comes apart as well as the beaver tail hammer trigger it can all break dowm