You can find the Oneisall Replacement Blades on Amazon Here: amzn.to/3Nzfx7F OneIsAll Full Set Clippers: amzn.to/3NZV9OM Best Reusable Pet Hair Remover for Couches and Cars: amzn.to/448dq1Q Best Poop Bags: amzn.to/3NYGQtM Awesome Ball Toy For Dogs: amzn.to/3JGcuJH (Affiliate links)
Already spent an hour trying to figure out how get this blade back on. Thank you SO SO much!! Was much simpler than I was making it and the instructions that come with it do not spell it out like you. Saved me; thank you!
I know! That is why when I figured it out I had to make a video to make it easier for everyone else to not struggle as much as I did! Great Clippers for sure and the replacement heads are affordable to keep them going for years to come.
@@CallThatGeek Appreciate that as like everyone else it wasn't a very good explanation in packet! I have used all kinds of clippers & still couldn't figure it out! LOL
Golden Doodle hair is...was the bane of my existence! Thanks to you I no longer have to use wires, paperclips, needles and the last of my sanity to get all the hair out from under the blade! Thank you, thank you, thank you! 👏👏👏
Thank you so much for your helpful video! I have an elderly Shih Tzu with heart issues, so I can no longer have him professionally groomed. It causes him too much anxiety. I've been using the Oneisall rechargeable clippers for a year or so. They haven't been working right, so I thought they needed replaced. By watching your video, I was able to clean the blades. They should work much better now. I really appreciate your helpful video!
¡Que Dios te bendiga! Éste es el único video que encontré en el que se explica como volver a poner la cuchilla en este tipo de cortadora. 🇨🇷 🇨🇷 Saludos desde Costa Rica 🇨🇷 🇨🇷
lol yes I was flexing with a terrified expression!! Thanks so much for the clear instructions without which I know I would not have removed that blade - *two thumbs* it is and ....👍👍🤭😁
Depends on the usage. When you notice the hair doesn’t cut as good and you have to pass through it a few times then it might be time to replace. Best part is that it’s affordable and easy to do
The instructions that came with mine (same unit as yours) say to move blade adjustment ring to 0.8mm to remove the blade and 2mm to install the blade. But you seem to have no problem removing the blade with the adjustment ring set to 2mm. I'm looking at the internals, and the only difference this would make is by putting the adjustment ring at 0.8mm, the white synthetic blade will be extended more, possible giving a more rigid surface to push on. Any thoughts on this? Are you sure your instructions don't say the same thing as mine because our units are identical.
to be honest, I don't have the instructions anymore since this was awhile ago. You should be fine either way and the instructions might have updated since I made the video.
Can you use this blade without the guard? Will it cut your pup? My pup got matted after surgery and needs to be cut down. The smallest guard isn't doing the trick. Please help
Thank You SO MUCH!!! I didn’t have mine in 2.0 and I could NOT get it back in 🤪 it was literally Driving me Crazy!! Do You by chance know if they sell a Replacement Battery? My First set no longer charges😔 so I did order a whole new set, but I hate to be Wasteful!! I refuse to just throw the first clipper away!! 😫 the Replacement Blades are AWESOME and WELL Worth the $20 I paid for them for my first set!! I have 2 standard poodles and this little clipper is actually Quite Amazing!!
OKAY... my problem is that when I OPEN the clippers, it seems the parts all fall out, and I have a hard time getting it back together AND they are noisier. The plastic teeth came out, the spring separated... and that little black thing in the back came out... GEEEEEEEEEEEEEZE... It took me over an hour... and everytime I thought I had it... trying to put it back together, it just seemed that NOTHING snapped back together... I now have everything back in place.. it turns on and off,,, but seems louder than before. I was trying to oil it. What do you oil? thanks
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
You can find the Oneisall Replacement Blades on Amazon Here: amzn.to/3Nzfx7F
OneIsAll Full Set Clippers: amzn.to/3NZV9OM
Best Reusable Pet Hair Remover for Couches and Cars: amzn.to/448dq1Q
Best Poop Bags: amzn.to/3NYGQtM
Awesome Ball Toy For Dogs: amzn.to/3JGcuJH
(Affiliate links)
Already spent an hour trying to figure out how get this blade back on. Thank you SO SO much!! Was much simpler than I was making it and the instructions that come with it do not spell it out like you. Saved me; thank you!
I was fidgeting with the blade trying to get a new one in for about 10 minuets. Wow, that was easy. Thanks!
Thank you SO MUCH! You are the best! The instructions that came with the clippers were useless. I really appreciate your video.
I know! That is why when I figured it out I had to make a video to make it easier for everyone else to not struggle as much as I did! Great Clippers for sure and the replacement heads are affordable to keep them going for years to come.
You are correct. I couldn't get the black back on correctly until I watched this video. Thanks.
@@CallThatGeek Appreciate that as like everyone else it wasn't a very good explanation in packet! I have used all kinds of clippers & still couldn't figure it out! LOL
I bought this clipper in 2020 when Covid shut down everything. I am still using these clippers. They are the best.
Golden Doodle hair is...was the bane of my existence! Thanks to you I no longer have to use wires, paperclips, needles and the last of my sanity to get all the hair out from under the blade! Thank you, thank you, thank you! 👏👏👏
Thank you so much for your helpful video! I have an elderly Shih Tzu with heart issues, so I can no longer have him professionally groomed. It causes him too much anxiety. I've been using the Oneisall rechargeable clippers for a year or so. They haven't been working right, so I thought they needed replaced. By watching your video, I was able to clean the blades. They should work much better now. I really appreciate your helpful video!
Thank you so much. I bought mine during Covid and had no idea how to change the blade. The clippers still work great!
So helpful! You made it look 100x easier than the darn instructions. Thank you so much ❤
Incredible video. Straight to the point while offering additional help at the beginning. I was terrified of breaking this thing!
I could see how terrifying it can be for sure
Thank you!! I watched 3 before you, but only you showed me how!! You are a life-saver!!!
Wow. That’s amazing. Glad you were able to do it!!
Thank you very much. Was too scared to push hard for breaking it. But this really helps. All the best to you. Happy holidays.
You’re welcome! Happy Holidays to you too.
Hell ya. Short and too the point. Needed this today. Life saver.
Thank you! My clippers work like new again, and I was able to order new blades with the link you provided.
Awesome!! Glad it worked!
You made that so much easier than I thought it was going to be, thank you!
You're very welcome!
THANK YOU! I'll order my replacement blade today.
Thanks! I had to find your video on YT just so I can give you a Like! The instructions and illustration in the manual were useless!
Thanks for doing this video. It was exactly what I was looking for. You're the man.
You’re welcome! I’m just trying to help others.u
YOU’RE A LIFE SAVER ❤❤❤
Glad it was helpful!
Thank you, I was struggling to put it back on, this video helped extremely
Glad it helped!
@@CallThatGeek 🙃
Thank you so much for this! I couldn’t find instructions anywhere and thought I broke it!
Oh man. Glad you didn’t :)
Thanks bro saved a lot of time ❤
Perfect instructions! Thank you so much!
Thank you. I have an older model couldn't find instructions.
Thanks. Exactly what I was looking for.
Great video! So helpful.
Thank you! It popped right in!!
Glad it helped!
Very helpful video. Thank you so much. I liked, commented and subscribed.
Thanks for the sub!
Great video. It worked 👍
You saved me bro, thanks.
No problem!
¡Que Dios te bendiga! Éste es el único video que encontré en el que se explica como volver a poner la cuchilla en este tipo de cortadora.
🇨🇷 🇨🇷 Saludos desde Costa Rica 🇨🇷 🇨🇷
Perfect! Thank you!
Thanks for the advice. 👍
lol yes I was flexing with a terrified expression!! Thanks so much for the clear instructions without which I know I would not have removed that blade - *two thumbs* it is and ....👍👍🤭😁
You're so welcome!
More helpful than you can imagine lol❤
I'm glad you found it helpful! Thank you for the comment! :)
This was timely and very helpful! Could you please show how to remove the blade for cleaning on the small trimmer? Thanks!
Thanks for the feedback, I personally don't have the small trimmer myself.
I was wondering how to do that. It worked. Thanks.
Glad I could help! If you aren’t following I would appreciate a follow as well. Thanks for taking the time to comment. It means a lot to me.
Thank you for the video! I literally thought I broke something while opening it because it was just not getting closed.
It can seem that way sometimes! lol
Sir you made my day thanks
Glad to help you out, enjoy the clippers!
Bless you! I was about to give up😮❤
Hopefully it is easy now for you :)
Oh, my god!
THANKS YOU VERY MUCH! RUSSIA and my cat LOVE YOU 🤣🤣❤
Champion 🏆
Okay but how do you sharpen these particular clippers ?
Thanks so much ❤
You are welcome
Thanx bro❤
Glad you found it helpful!
Thank you, the directions in the box were terrible! Your advice worked great.
join the party! lol. As soon as I figured it out I made a video because I knew others would be in the same boat.
How often should you replace the blade?
Depends on the usage. When you notice the hair doesn’t cut as good and you have to pass through it a few times then it might be time to replace. Best part is that it’s affordable and easy to do
Thanks for this I was like wtf am I doing Wrong putting jt back on LOL
The instructions that came with mine (same unit as yours) say to move blade adjustment ring to 0.8mm to remove the blade and 2mm to install the blade. But you seem to have no problem removing the blade with the adjustment ring set to 2mm. I'm looking at the internals, and the only difference this would make is by putting the adjustment ring at 0.8mm, the white synthetic blade will be extended more, possible giving a more rigid surface to push on. Any thoughts on this? Are you sure your instructions don't say the same thing as mine because our units are identical.
to be honest, I don't have the instructions anymore since this was awhile ago. You should be fine either way and the instructions might have updated since I made the video.
@@CallThatGeek There’s a video for this unit on Amazon that shows the same thing, .8mm to remove and 2mm to install. Just FYI
Can you use this blade without the guard? Will it cut your pup? My pup got matted after surgery and needs to be cut down. The smallest guard isn't doing the trick. Please help
Thank you mine didn't have any instructions. I accidentally pushed it off and I didn't know how to put it back in
Thank You SO MUCH!!! I didn’t have mine in 2.0 and I could NOT get it back in 🤪 it was literally Driving me Crazy!! Do You by chance know if they sell a Replacement Battery? My First set no longer charges😔 so I did order a whole new set, but I hate to be Wasteful!! I refuse to just throw the first clipper away!! 😫 the Replacement Blades are AWESOME and WELL Worth the $20 I paid for them for my first set!! I have 2 standard poodles and this little clipper is actually Quite Amazing!!
I don’t know if you can replace the battery or not. I’ve been searching around and I can’t find anything
@@CallThatGeek Thank You SO Much for looking! ☺️
Particular attention should be paid to checking that the knobs underneath are at their maximum value, otherwise they will not fit fully in place.
thank you
OKAY... my problem is that when I OPEN the clippers, it seems the parts all fall out, and I have a hard time getting it back together AND they are noisier. The plastic teeth came out, the spring separated... and that little black thing in the back came out... GEEEEEEEEEEEEEZE... It took me over an hour... and everytime I thought I had it... trying to put it back together, it just seemed that NOTHING snapped back together... I now have everything back in place.. it turns on and off,,, but seems louder than before. I was trying to oil it. What do you oil? thanks
I never comment but 10000% loved this video ! SUPER HELPFUL AND QUICK TO THE POINT ! Thank you So Much to the Creator !!!! 🫶
Thank you 😊
You're welcome 😊
thanks! i got it done with your simple tutorial quicker than onisall chat .... well, they still havent responded!
Glad it helped
Thx :)
Appreciate you!
Hi, how do I sharpen the blade?
I believe you have to buy a new blade. I have a link in the description
Mine is rattling. Can u tell me what that might mean? Normally it’s pretty quiet when I’m using it.
Might be loose? No idea other than that
Thank u!
Gratitude!
Thanks!!
No problem!
Thank you...mine is hit and miss.....took 30 mins before it wiuld click in, then intook it out againnand 10 mins b4 it went back in again 😂😂😂😂
That’s a lot of in and out. 😂
@@CallThatGeek totally...i was loosing the will to live until i found your video to confirm i was doing it right so big big thank you 😻🤪🤣
Ty!
NP! :)
👍👍👍👍
No! Mine screws off and on…😩
Thought i was going to break mine lol
Thank you!
Thank you so much !!
Thank you so much❤
Thank you!!!
You're welcome!
Thank you!
Thank you so much!
You're welcome!
Thank you!!