Scott Garner in most states if you build something with your own hands that has turn signals, headlights, brake lights, seat belts, and can go fast enough then it can be registered as a kit car, and in states with emissions you have to pass the emissions tests. I’ve seen guys make home built sand rails street legal here in Oklahoma...
This guy: Builds a racecar with pushrod suspension from scratch. Also this guy: Cuts a rubber hose with a sharp knife on top of his own racing slick tyre.
Why bother everyone else is driving their giant burgerboxes drunk, drugged out, half a sleep and or staring their phones. If its commiefornia you can forget about getting any compensation anyways as the other party is most likely an illegal with a driver's s license based on false ID. Best keep it illegal so you are always 110% alert when driving it on the roads.
Love your passion. My 944 developed a head gasket leak so I thought it was a good time to learn how to rebuild engines. While not nearly as difficult as what you've done here, it just goes to show you that if you have the time and resources, you can do just about anything these days. At 56, it's probably a little late for me to build my own car, but it is something that gnaws at me, especially when I see people like you that go for it and do it. Keep it up. Loving what I'm seeing. God bless and merry Christmas
Mind the hoop bar (definitely worth redesign/weld), when you were sitting in it your head was hitting it. If anything happens your helmet and/or skull will appreciate the extra breathing room.
LOVE my '99 Boxster. Have owned well over 100 cars...many much newer and with far more power...but it has been the most enjoyable of all. Your (completely useless) comment illustrates that some people can't resist opportunities to bring others down.
I'll be 70 in April, I quit racing stock cars 15 years ago and got into BMW motorcycles. I tend to want to race everyone in the twistys, the Tail of the Dragon is visited about twice a summer. I still run my auto diagnostic and electrical repair shop. I just bought a 97 Miata from the 60ish lady who bought it new. My dog rides the bike with me, but we haven't been on the bike since I bought the Miata. It's needed some work, but basically is a sound car, and man it handles. It's been so long since I've driven a "real sports car". Your project car is really quite nice, I don't do big projects any more, never did really like them. You have a lot of talent and skills. As far as the crankcase pressure goes, you can use the exhaust to pull it into a "vacuum", there's power in a low pressure sump. Super late models use the dry sump pump to do it, or some use a belt driven vacuum pump to pull the pressure down. Smokey said the rings seal better, and there's less windage, oil can't stay suspended as much. The power trick was discovered by accident by the fellow who was taking care of the Buick V6 Indy engines. An engine showed up for refreshment with the breather system sealed and they dyno tested it not knowing it was sealed prior to building, and it made too much hp. They moved it to another dyno and it still made too much power. Anyway have fun and stay safe.
@@FT-64 definitely good to run AMod for autocross, and probably some time trial class. Maybe getting a good hoop over the drivers head and Hill Climbs would be fine too!
Hey this is just what I wanted to see! I’ve been building my own 90’s era f1 inspired car for 4 years now. I utilize a lot of VW and Porsche parts. Also has a Porsche engine and transaxle. Biggest difference between our cars is definitely the aero!
Drivers were dieing very young. These cars didn't offer very much protection for their drivers. Jimmy Clark died in a crash at Hockenheimring at 32 years old.
The entry level formula classes are like this, but with a carbon monocoque! I had the privilege to get a race track training (on the Oschersleben DTM track in Germany) with Formula BMW cars and they where somewhat similar to this, but with a motorcycle race engine that revs to 12.000 or so. It felt so amazing and the power/weight ratio was enough to propel it in under 3 seconds to 100kmh but the top speed isn’t too dangerously fast. It was amazing for me as a mediocre track day driver and not too much to handle. The sequential transmission with a clutch was a bit new at the beginning, even if I’m used to manual gearboxes, but once you learned to shift it above 8k without the need for clutching it became second nature. Everybody who has the chance to get into a open wheel single seater should definitely use it, it’s like no car you’ve ever driven before. All the high power BMW M4 and M5s I’ve driven felt boring and cumbersome compared to this, even if they had 600+ hp compared to the 190 or so hp of the formula car. And once you get above a certain corner speed and feel the wings do their work, it’s insane! It feels like you’re driving on train tracks! I’ve never experienced so much grip in my entire life!
Much of the safety improvements in F1 have to do with improved track and runoff areas. Also better corner workers. Some of the safety features could be easily integrated into a throwback F1 car. Fuel cells, fire extinguishers. No wings or ground effects to slow down the cars. F1 now has little appeal. The races are processions of one highly regulated one design spec racers. Even though they have budgets like space programs.
This is a thing of beauty. That sound when you were tanking it down the straight! Must be insanely quick, weighs about the same as a shoe I should think!
Are they, though? When he's sitting in the car without a helmet, I wondered what would happen if the car was upside down and he was wearing a helmet. Probably would've protruded a bit.
You're frickin awesome. I love seeing that the new generation of car fans is starting to get in to more classic designs. I can't wait to see what the bodywork looks like.
I happened across this after searching for Michelin tires. Immediately subscribed and hit the thumbs up button. Enjoy the build and ride! I love the fact you are out there doing this project and can't wait to follow the journey and all the learning opportunities...
neat! But one thing: the tyres: they used Bias-ply and threaded tyres, AVON Tyres makes replica's of those tyres (even going as far as using the same molds and manufacturing technique) The reason i mention is that the tyres from that era didn't gave much grip and cornering and the drivers had to adapt to it.
Dude, that drive to the coffee shop, talk me through your hair care regimen! Its immaculate! Love the car, captures the spirit of the time very well. Subscribed and looking forward to more!
Love this! Want this! You need to start your own track car business building this for those of us crazy enough to want to drive this with eternal smiles on our faces. You are amazing.
I once built a slot car version of this in 1/25th scale...this is my favorite type moto sport car of all time as well...good luck and smooth sailing all the way...you are living my dream
Well done mate , out here in (Australia) blokes that build these types of vehicles are called "Backyarders" ,you are now one of that fine body of men that can wear that name with pride! The name denotes people that follow thru with there ideas, not just talk about them. Keep up the good work, follow your dreams.
Man. This vid was sooooooooo cool the only thing that upset me, and I've NEVER been upset about any other vid EVER, is you can only sub to you like, once, instead of A THOUSAND TIMES!!! What an absolute GEM. Every bit of it. Can't wait to see future stuff, Fantastic. Masive respect from over here in the UK.
Good job! I’d love to see step by step or progress videos on any further projects. Some of the guys doing restorations (Cheftush, Rusty Beauties) are great at showing progression. Keep up the good work!
The thing I love about it is that it has such a striking appearance. It almost looks like a gnarly shack build, being that it's totally naked with all its messy parts exposed, but like in a really cool, paradoxically fancy and well-structured way. It kinda looks like a mean robot. I also love the low-slung angle you took with it, with the cockpit being tucked low and "inside" the wheelbase if you will, instead of on top of it like a tamer and more relaxed car would have. That to me just gives it a really hunched, attacking look (but then again, it's a formula car, so why am I even pointing that out?). Overall, everything about it speaks racing. It's as low to the ground and strikingly straightforward and efficient as you can get. Sweet looking car.
I know it’s not the same as having it in video but I’ve designed a suspension before so here are some useful things to look into if you’re interested: Racecar Design - Derek Seward (Really accessible book that walks through why certain engineering decisions are made) To go deeper: Racecar Vehicle Dynamics - Milliken & Milliken (Pretty much the bible of vehicle dynamics) They also wrote a book on chassis design too. Each car is different and has different fixed constraints, so it’s a mix of designing the chassis & suspension around those packaging constraints, and then optimising the geometry for the desired static & dynamic characteristics of the vehicle (discussed in those books). Hopefully this gives some stuff to look into as it’s really interesting and satisfying when the puzzle pieces together!
I have to say I'm completely blown away by the incredible range of skills and talent you possess and the depth to which you seem to possess them. You remind me, more than anyone else, of the late, Great Smoky Yunick. You also remind me of Mike Patey, the aviator, engineer, fabricator and all-round master craftsman.
Love it! Super cool and great use of a Boxster, lol.. I'm with you 101% on how great the 50s-60s cars were. Yours even sounds old schooll IMHO. Keep it up..
@@bradsailer7739 You can build it but you can't take it out on public roads. We have safety regulations for a reason and it's pretty crazy to ignore them to such an extent. I don't want to drive around shit that people cobbled together in their sheds. If your build is that good you can study the laws and make the car road worthy by checking every box. It's possible and some have done it. But good luck getting it right on your own, often multi billion dollar manufacturers with decades of experience and huge RnD budgets have a hard time with these regulations.
Even in germany there are ways around it. To make it street legal could be a pain in the butt, but there are some ways to get that thing moving at least now and then. Those ways are originally meant for dealers to move a car no matter what and are often used by car afficinados to move a car on it's own axle. Furthermore: Germany is part of the EU. So you 'only' need to register in another country. Yes, that is not cheap and it's complicated but can be done. I knew a guy who made his 'Harley' driveable on the street, that way. He ran a british licence plate... but I bet there are options even after the brexit.
My brother i subbed straight away. A tip though, don't sound like your reading of a script. Thats the only thing I could find. Keep it up! I'm looking forward to whT elE happens with the car
Wesley - I discovered this channel last night. Been binge watching!!! I don't understand why your channel hasn't exploded yet. You deserve way more subscribers and views.
Although I personally don’t like Porsche, I think Boxter was a perfect choice. I first learned about F1 in the mid sixties with Lotus being my favorite mark. And of course Jimmy Clark was the best and my favorite also. It takes an immense amount of thought, knowledge, and skill to accomplish a feat of this complexity. My congratulations to you for a job well done.
Hey man I subscribed, I'm super excited to see more people on RUclips that not only have the crazy ideas but the skills and means to bring them to life!
realy awsome F1 car build, super impressiv, as a german guy I can say, never seen such a great car, good luck with it further on, aswell for new projects
Wow man ! Amazing project I love the late 60’s f1 cars, I’m a fabricator/welder, in Niagara Canada, love the channel and your ideas I’ll be staying around for sure
For me the mid 70's F1 cars are the golden era, nice that you managed to create this beast, now it will be possible just to build chassis and just slam whatever engine you have available and race like the old days Ps: cannot wait for the external body kit 🙌🏽
Thanks to everyone for all the comments! I’m still going through all of them, sorry it’s taken a few days!
Hell yes! Where is steering unit from? I thought can’t be street legal if wasn’t by major manufacturers
Track map of Spa! That would be cool to see this turn a few laps.
Such a cool idea. Would love to see it driven in anger!
I love this, I have a similar buold planned
Scott Garner in most states if you build something with your own hands that has turn signals, headlights, brake lights, seat belts, and can go fast enough then it can be registered as a kit car, and in states with emissions you have to pass the emissions tests. I’ve seen guys make home built sand rails street legal here in Oklahoma...
Think about developing a kit... New life for all those old boxsters out there...
Im pretty sure all metal work was designed on computer and cut on cnc. So the files could be shareable.
It would be a lot easier to make than a lykan.
Foam Test yuppp
Rebuilding a Porsche engine..
Pricey.. uh!
@@RAD-RC ha.. I see ur Hint. But The difference between this and that lykan build.. Lykan themselves wanted to help as well
This guy: Builds a racecar with pushrod suspension from scratch.
Also this guy: Cuts a rubber hose with a sharp knife on top of his own racing slick tyre.
tire*
@@thedandy6765 Its only Tire in the US. Its Tyre in the ROW 😇
@@realMaverickBuckley ROW?
@@thedandy6765 Every other country that doesn't play in the baseball "world" series. ;o)
Book smarts won’t often translate to street smarts
2060: I built myself a 2020 F1 v6 car.
Seb in 2060: bring back the v12's
Sean Martens f1 2060: *cries in 1 cylinder turbocharged electric hybrid cars*
If it has Ferrari’s reliability record this year I might re-think that choice
On 3d printer))
@@ToroCH yeah. Actually dtm's inline 4 600hp sounds oretty lit too.
I am beyond impressed. I'm also ashamed at what I've been doing for the past 8 months.
A couple of weeks ago I built a tall bird perch for our regular crow family, yes, the boxer car built into 1960's style car tops my project
Wow, it's got six cupholders! Perfect for the drive-thru!
Instant warm drink
@@stvnlp Turns cold milk directly from the fridge into evaporated milk😂
Practical use for that hot metal thing behind the pilot
Gets pulled over, cop "is it stock" he looks him in the eye "yes"
Technically yes since that’s the way it came
You could add some “hidden” lights to make it street legal and maybe even register it!
Thats what I was thinking when he was getting his coffee and said its street legal jokingly... its a great idea.
"Okay, sir, I just need you VIN"
"Uhh, '1'".
try arizona! they'll just about let you hang a license plate on a toaster. maybe even over the phone from a made up address.
Why bother everyone else is driving their giant burgerboxes drunk, drugged out, half a sleep and or staring their phones. If its commiefornia you can forget about getting any compensation anyways as the other party is most likely an illegal with a driver's s license based on false ID.
Best keep it illegal so you are always 110% alert when driving it on the roads.
It’s clearly street legal already, he was driving it on the street.
This is the kind of thing that can be accomplished by NOT sitting and watching RUclips. This guy is awesome!
you need to get Doug out to find all the quirks and features!!!
Nah. Not Doug. This should go to Randy Pobst to get proper track workout.
yeah!! Would love to see his review on this build!! I can imagine how he starts!! " Thissssss....A..... &#(!&$($!&$&"...hahah
Chris harris would properly skid this🤣
The doug score would be ae a 50 because it doesn't have a cupholder haha
@@mikedelgado5901 god comment hahaha
Love your passion. My 944 developed a head gasket leak so I thought it was a good time to learn how to rebuild engines. While not nearly as difficult as what you've done here, it just goes to show you that if you have the time and resources, you can do just about anything these days. At 56, it's probably a little late for me to build my own car, but it is something that gnaws at me, especially when I see people like you that go for it and do it. Keep it up. Loving what I'm seeing.
God bless and merry Christmas
Try a locost kit car, there's so much documentation on them
Damn I wish I was this smart to build a race car. Baller build.
Thanks Man! I appreciate it!
No doubt!
I'm 18 and planning on building a lotus type 49 ish car before 2040. I wonder if I could make it street legal lol.
Not to be a dr phil type but if you want to do something like this then JUST DO IT lol the information on how is out there I promise
@@derpyfpv668 yeah... you might need to build it as an EV at that year...
Mind the hoop bar (definitely worth redesign/weld), when you were sitting in it your head was hitting it. If anything happens your helmet and/or skull will appreciate the extra breathing room.
All I noticed was how close the alternator was to his head...
Much respect. It's kind of like building your own Ariel Atom.
but way more interesting.....
Pros: $2500 Porsche Boxster
Cons: $2500 Porsche Boxster
LOVE my '99 Boxster. Have owned well over 100 cars...many much newer and with far more power...but it has been the most enjoyable of all. Your (completely useless) comment illustrates that some people can't resist opportunities to bring others down.
@@sthr2110 you care too much.
@@sthr2110 It's a joke, lighten up
The 2.7's are pretty tough, but 3.2 and up all have the exploding IMS bearing...
@@billrandell4641 Wheeler Dealers showed a pretty good aftermarket fix for that. Fascinating!
I'll be 70 in April, I quit racing stock cars 15 years ago and got into BMW motorcycles. I tend to want to race everyone in the twistys, the Tail of the Dragon is visited about twice a summer. I still run my auto diagnostic and electrical repair shop. I just bought a 97 Miata from the 60ish lady who bought it new. My dog rides the bike with me, but we haven't been on the bike since I bought the Miata. It's needed some work, but basically is a sound car, and man it handles. It's been so long since I've driven a "real sports car". Your project car is really quite nice, I don't do big projects any more, never did really like them. You have a lot of talent and skills. As far as the crankcase pressure goes, you can use the exhaust to pull it into a "vacuum", there's power in a low pressure sump. Super late models use the dry sump pump to do it, or some use a belt driven vacuum pump to pull the pressure down. Smokey said the rings seal better, and there's less windage, oil can't stay suspended as much. The power trick was discovered by accident by the fellow who was taking care of the Buick V6 Indy engines. An engine showed up for refreshment with the breather system sealed and they dyno tested it not knowing it was sealed prior to building, and it made too much hp. They moved it to another dyno and it still made too much power. Anyway have fun and stay safe.
I want to see this thing in action: Solo, Time Trials, anything!
It wont pass safety inspection for any actual event - not even the 1960s regulations.
@@FT-64 definitely good to run AMod for autocross, and probably some time trial class. Maybe getting a good hoop over the drivers head and Hill Climbs would be fine too!
Think about developing a kit... New life for all those old boxsters out there...
@@FT-64 It has seat belts, that alone would make it 10x as safe as a 1960 F1 car :))
@@FT-64
Fuck safety inspections. If he wants to risk his own life in pursuit of glory, no one should be allowed to stop him.
Born in 51 and grew up a car nut. Indy and Le Mans were on TV. Car magazines were stacked up at home. Jackie Stewart was a hero.
Nice job you friend.
Hey this is just what I wanted to see! I’ve been building my own 90’s era f1 inspired car for 4 years now. I utilize a lot of VW and Porsche parts. Also has a Porsche engine and transaxle. Biggest difference between our cars is definitely the aero!
Awesome! Glad to see other people building cool stuff!
could we see some pics please?
Markus Offermann I’ll have to see if I can upload them to a shareable link
That actually sounds really cool
Wow great idea
I'd love F1 to go back to that kind of simplicity, it would make so much sense in our world and the races would be amazing
Drivers were dieing very young.
These cars didn't offer very much protection for their drivers.
Jimmy Clark died in a crash at Hockenheimring at 32 years old.
@@AJCsr ok so make these cars but out of carbon monocoques and with modern safety
The entry level formula classes are like this, but with a carbon monocoque!
I had the privilege to get a race track training (on the Oschersleben DTM track in Germany) with Formula BMW cars and they where somewhat similar to this, but with a motorcycle race engine that revs to 12.000 or so.
It felt so amazing and the power/weight ratio was enough to propel it in under 3 seconds to 100kmh but the top speed isn’t too dangerously fast.
It was amazing for me as a mediocre track day driver and not too much to handle.
The sequential transmission with a clutch was a bit new at the beginning, even if I’m used to manual gearboxes, but once you learned to shift it above 8k without the need for clutching it became second nature.
Everybody who has the chance to get into a open wheel single seater should definitely use it, it’s like no car you’ve ever driven before.
All the high power BMW M4 and M5s I’ve driven felt boring and cumbersome compared to this, even if they had 600+ hp compared to the 190 or so hp of the formula car.
And once you get above a certain corner speed and feel the wings do their work, it’s insane!
It feels like you’re driving on train tracks!
I’ve never experienced so much grip in my entire life!
@@dickmansucker1972So, Formula Vee
Much of the safety improvements in F1 have to do with improved track and runoff areas. Also better corner workers.
Some of the safety features could be easily integrated into a throwback F1 car. Fuel cells, fire extinguishers.
No wings or ground effects to slow down the cars.
F1 now has little appeal. The races are processions of one highly regulated one design spec racers. Even though they have budgets like space programs.
This is a thing of beauty. That sound when you were tanking it down the straight! Must be insanely quick, weighs about the same as a shoe I should think!
This is the most humble yet awesome project car video I've seen so far.
That is one sweet ride, man! Well done!
Thanks!
08:00 - I'm watching this with subs, and when revving the engine it says "music" ...
Google's AI is definitely getting better.
Practically every video that involves the sound of a sweet engine says “music” 😉😂
Lmaoo
Bruh this is AWESOME
but it's not 60's if the rollover bars are actually protecting your head 😂
He said "with modern safety". :)
Are they, though? When he's sitting in the car without a helmet, I wondered what would happen if the car was upside down and he was wearing a helmet. Probably would've protruded a bit.
Not only is the build awesome, it's also extremely well thought out, and documented. Kudos!
Wow! 8 months is incredible to design and fabricate a car. Sweet concept and looks awesome.
I'm glad that youtube showed this to me
You're frickin awesome. I love seeing that the new generation of car fans is starting to get in to more classic designs. I can't wait to see what the bodywork looks like.
I happened across this after searching for Michelin tires. Immediately subscribed and hit the thumbs up button. Enjoy the build and ride! I love the fact you are out there doing this project and can't wait to follow the journey and all the learning opportunities...
Awesome build, great cinematography already with basically your first video, keep it up and looking forward to seeing more
Thank you, I appreciate the support!
Can I just say that I love how @3:47, we find out you built a matched PC to your Porsche. Or vice-versa. Either way, AMAZING work man!!!
neat! But one thing: the tyres: they used Bias-ply and threaded tyres, AVON Tyres makes replica's of those tyres (even going as far as using the same molds and manufacturing technique) The reason i mention is that the tyres from that era didn't gave much grip and cornering and the drivers had to adapt to it.
Dunlop still make their R5 tyre from the 60s
Why would you want a shittier tire?
@@theregiment6236 to be able to 4 wheel drift it through corners, like how it should be driven.
MK3424 So more dangerous and, more important, slower? Why is that how it should be driven?
@@theregiment6236 not supporting changing the tires but because its a drivers car not the best car ever but the best car for the experience
Super weird when a random video pops up and 2 minutes in I know exactly where you are. Now I'm homesick.
Wow, what a dream build! Something almost exactly like this has been on my mind for about 2 years now. I'm happy to see it can be done!
Like the chassis work, and the pushrod suspension. Nice job.
Congratulations Wesley! Killing it man! Looking forward to seeing the car in the metal down the road.
Cheers!
Thanks a ton guys! I'm excited for y'all to come this way to drive it!
1960's F1 - gorgeous pure cars/tracks. Absolutely loving this project from here in York (UK). Best of luck!
Dude, that drive to the coffee shop, talk me through your hair care regimen! Its immaculate!
Love the car, captures the spirit of the time very well. Subscribed and looking forward to more!
Hah! Thanks man, I’m probably the wrong person to talk to on that. I just put in enough gel that It’s similar to concrete. I appreciate it!
What’s crazy is I watched this all unfold on rennslist forums! I was very intrigued with this. Glad I stumbled on this video, very cool.
This is literally the coolest thing I´ve ever seen!!
i like how the front suspension went from sideways to liner half way thru, clearly something was not working as intended. Nice work
Love this! Want this! You need to start your own track car business building this for those of us crazy enough to want to drive this with eternal smiles on our faces. You are amazing.
I once built a slot car version of this in 1/25th scale...this is my favorite type moto sport car of all time as well...good luck and smooth sailing all the way...you are living my dream
Clicked faster than bill clinton boarding Lolita Express.
LOL
Lowinski was more of the Hogg express.
Haha!
Mic drop!
Lol! With Hillary, getting dragged up the stairs, pretending she don't wanna go!!! Lol!
Well done mate , out here in (Australia) blokes that build these types of vehicles are called "Backyarders" ,you are now one of that fine body of
men that can wear that name with pride! The name denotes people that follow thru with there ideas, not just talk about them. Keep up the good work, follow your dreams.
what a car you've created mate,,,, should let her eat at the feedom factory,, i'm sure Cleetus won't mind one bit
I'm sure Cleetus would throw a huge turbo on it.. and see if he could light up those bald eagles!
Man.
This vid was sooooooooo cool the only thing that upset me, and I've NEVER been upset about any other vid EVER, is you can only sub to you like, once, instead of A THOUSAND TIMES!!!
What an absolute GEM.
Every bit of it.
Can't wait to see future stuff,
Fantastic.
Masive respect from over here in the UK.
Good job! I’d love to see step by step or progress videos on any further projects. Some of the guys doing restorations (Cheftush, Rusty Beauties) are great at showing progression. Keep up the good work!
Insanely cool and obviously very well thought out. Can't wait to see this pop up with some homemade body work in the future
This is everything in Street motoring I didn't know I loved.
The thing I love about it is that it has such a striking appearance. It almost looks like a gnarly shack build, being that it's totally naked with all its messy parts exposed, but like in a really cool, paradoxically fancy and well-structured way. It kinda looks like a mean robot. I also love the low-slung angle you took with it, with the cockpit being tucked low and "inside" the wheelbase if you will, instead of on top of it like a tamer and more relaxed car would have. That to me just gives it a really hunched, attacking look (but then again, it's a formula car, so why am I even pointing that out?). Overall, everything about it speaks racing. It's as low to the ground and strikingly straightforward and efficient as you can get. Sweet looking car.
That stance reminded me immediately of jay leno lmao awesome build so far on the vid.
Good job man. I look forward to learning more about this build and seeing your progress.
so freaking cool! i would love to see more about how you designed the frame and suspension. totally subscribing!
I know it’s not the same as having it in video but I’ve designed a suspension before so here are some useful things to look into if you’re interested:
Racecar Design - Derek Seward
(Really accessible book that walks through why certain engineering decisions are made)
To go deeper: Racecar Vehicle Dynamics - Milliken & Milliken
(Pretty much the bible of vehicle dynamics)
They also wrote a book on chassis design too.
Each car is different and has different fixed constraints, so it’s a mix of designing the chassis & suspension around those packaging constraints, and then optimising the geometry for the desired static & dynamic characteristics of the vehicle (discussed in those books).
Hopefully this gives some stuff to look into as it’s really interesting and satisfying when the puzzle pieces together!
@@kieranwinter6273 thanks man
I have to say I'm completely blown away by the incredible range of skills and talent you possess and the depth to which you seem to possess them. You remind me, more than anyone else, of the late, Great Smoky Yunick. You also remind me of Mike Patey, the aviator, engineer, fabricator and all-round master craftsman.
*B is for Build wants to know your location*
i want to shake this mans hand for his brilliance creating this car. well done mate
I want to see a breakdown of how this was done
You are a very smart young man. I'm always amazed by people who have the mechanical mind.
Put any kind of downforce on it and you'll be be glued to the track. Probably extremely squirrelly now given how light it is.
its a 1960's f1 car...
Very impressed with what you have achieved so far, you deserve the views.
Imagine if you actually dropped a Cossy into this. That would complete the package perfectly
hmm...I assume that you never tried a free breathing flat-6 porsche engine, right? These are addictive with their top-end only power.
Love it! Super cool and great use of a Boxster, lol.. I'm with you 101% on how great the 50s-60s cars were. Yours even sounds old schooll IMHO. Keep it up..
If I did something like that in Germany I would be in jail for the rest of my life now
Why? No freedom to build?
@@bradsailer7739 You can build it but you can't take it out on public roads. We have safety regulations for a reason and it's pretty crazy to ignore them to such an extent. I don't want to drive around shit that people cobbled together in their sheds. If your build is that good you can study the laws and make the car road worthy by checking every box. It's possible and some have done it. But good luck getting it right on your own, often multi billion dollar manufacturers with decades of experience and huge RnD budgets have a hard time with these regulations.
@@frankthetankricard thank you for the insight!
What could be worse than life in prison?
Even in germany there are ways around it. To make it street legal could be a pain in the butt, but there are some ways to get that thing moving at least now and then. Those ways are originally meant for dealers to move a car no matter what and are often used by car afficinados to move a car on it's own axle. Furthermore: Germany is part of the EU. So you 'only' need to register in another country. Yes, that is not cheap and it's complicated but can be done. I knew a guy who made his 'Harley' driveable on the street, that way. He ran a british licence plate... but I bet there are options even after the brexit.
I think this should be a kit you make. Many old boxters could have a new life. Love your work. Keep going!
Damn this looks faster than the 2020 Ferrari
Even a snail looks faster than a 2020 Ferrari
You marvelous, magnificent, madman! Excellent project!
When you know function is more important then how you look to others. Good to see others like this.
Year after year I keep coming back to this. Such a great project. 100x more interesting than any supercar.
My brother i subbed straight away.
A tip though, don't sound like your reading of a script. Thats the only thing I could find. Keep it up! I'm looking forward to whT elE happens with the car
I am 5 seconds into the video and just want to say props for attempting this. Very cool.
Somewhat modified.............front and rear suspensions from the MacPherson layout of a Boxster
The article and video were posted on The Drive and shared on one of my car enthusiast groups. I'm looking forward to seeing this project continue.
So this is what happened to the one kid in class that made the slingshot that could shoot over the oval! That things awsome as frick my guy 👍🤙
Wesley - I discovered this channel last night. Been binge watching!!! I don't understand why your channel hasn't exploded yet. You deserve way more subscribers and views.
You could probably start a company for those super rich dudes who really want an F1 car and just have a random Boxster sitting around
8 months! 8 months! Thats unelievably quick. Well done.
“I build a Porsche boxter into a f1 car” my boi. There is noooo boxter left in that thing that’s just it’s own 🤣
Congrats ambitious and motivation and the willingness and the patience you have
2:05 Holy shit that's the extreme bean right by my house, I live just west on College! Amazing car man cant wait to see more!
Another great video Wesley, I am looking forward to watching some more of your stuff.
Driving this in my country is as illegal as selling drugs to kids
So California then?
@@BenDunlop hahahahah nope, not in the us
Awesome job Sir! I love Boxsters and what You have done is so cool. Can’t wait to see what keeps coming from ya!
1:10 [laughter] lmao
Wow this is the coolest build I have seen in a while! Awesome work
My feedback. Super, super cool. Can't wait to see the finished product.
Although I personally don’t like Porsche, I think Boxter was a perfect choice. I first learned about F1 in the mid sixties with Lotus being my favorite mark. And of course Jimmy Clark was the best and my favorite also. It takes an immense amount of thought, knowledge, and skill to accomplish a feat of this complexity. My congratulations to you for a job well done.
Just stumbled on your channel... I love your content and now I'm binge watching EVERY video
Just understanding an F1 motor is an accomplishment! Good job.
Awesome project!! I’ve got a 981 BGTS, my mate has a fab 986S, and your project is just fantastic!
Hey man I subscribed, I'm super excited to see more people on RUclips that not only have the crazy ideas but the skills and means to bring them to life!
realy awsome F1 car build, super impressiv, as a german guy I can say, never seen such a great car, good luck with it further on, aswell for new projects
This is the coolest build/project I think I’ve ever seen! Definitely going to follow the Rennlist thread!
This is by far one of my favorite cars on all of RUclips. Seriously, I tip my cap to you good sir.
How SICK! this is great. Can’t wait to see what you have in store
Wow man ! Amazing project I love the late 60’s f1 cars, I’m a fabricator/welder, in Niagara Canada, love the channel and your ideas I’ll be staying around for sure
These are the type of people that bring us the mind blowing trend setting amazing inventions/improvements we thrive for!!!
Amazing project bro, damn. Maybe you could walk us through the perks and stuff that you had to do, entertainment for days!
For me the mid 70's F1 cars are the golden era, nice that you managed to create this beast, now it will be possible just to build chassis and just slam whatever engine you have available and race like the old days
Ps: cannot wait for the external body kit 🙌🏽