Hi Your explanation is mint for wiring gp switches can you help me pls My ignition loom seems to have more wires than enough all my lights work except headlight any thoughts thanks 6:34
You need to know if your ignition switch is ac/dc or just ac, if its the first you have to join two together so the ac goes to both sides of the switch
Proper colours should be red and blue are high and low beam white for horn, should be a long cable to horn, you should then have ac for high and low beam only this is usually brown and only feeds lights when engine running, purple feeds the pilot light power from the battery and this is switched via yellow cable, black cable feeds power to pilot bulb and rear lamp, dc is fed to the horn direct and the grey/ white then earths it out when you press the horn button. I hope this helps, good luck
Hi, I am trying to wire my Lambretta LI s3 and I would be eternally grateful if you can show a more detailed wiring at the ignition switch end please. The ignition switch I have has 4 positions and 7 wires (yellow green brown pink black blue & orange) and looks totally different to your one. Thank you for posting a very helpful video.
Hi
Your explanation is mint for wiring gp switches can you help me pls
My ignition loom seems to have more wires than enough all my lights work except headlight any thoughts thanks 6:34
You need to know if your ignition switch is ac/dc or just ac, if its the first you have to join two together so the ac goes to both sides of the switch
Hi mate, can you please confirm the wire colour and function on the handlebar switch please?
I have an S3 LI 150 to replace
Thankyou!
I have red, blue, yellow, white, black, grey and brown at the handlebars, scooter is battery model
Proper colours should be red and blue are high and low beam white for horn, should be a long cable to horn, you should then have ac for high and low beam only this is usually brown and only feeds lights when engine running, purple feeds the pilot light power from the battery and this is switched via yellow cable, black cable feeds power to pilot bulb and rear lamp, dc is fed to the horn direct and the grey/ white then earths it out when you press the horn button. I hope this helps, good luck
@@m1scooterlife259 thanks very much, will have a craic! 🇦🇺
Good luck take your time
@@m1scooterlife259 thanks very much, well done with channel and best of luck in '24
🇦🇺
Hi,
I am trying to wire my Lambretta LI s3 and I would be eternally grateful if you can show a more detailed wiring at the ignition switch end please. The ignition switch I have has 4 positions and 7 wires (yellow green brown pink black blue & orange) and looks totally different to your one.
Thank you for posting a very helpful video.
Hi Joe, if your not I'm a rush , I will help, I've just got in from work
@@m1scooterlife259
Hi,
Sorry, I didn't expect such a rapid reply.
When your are good and ready.
Regards,
Joe.
Hi Again,
Any chance of any info regarding the above question of the ignition switch modification.
Regards,
Joe.
Email me at helpinghandscooterman@gmail.com and I can forward where what cable goes