Thx I have been looking for how to use my laptop screen as a monitor for my Pi and this video really helped a lot :) Finally I can run my Raspberry Pi from my laptop!!
Do you know me?I was the small guy who came to your shop to buy things for my project..And you taught me that basic blink programme in arduino....And I bought a Raspberry pi....And Im from ooty....
Awesome.. Its working for me. Initially I tried with NOOBS connecting to BRAVIA TV via HDMI but didn't work. This is working Flawlessly. A Big Thank you ! Great Video !!!
I have tried VNC viewer many times. but it doesn't work. After using your method, I have received RPI screen on my laptop. It was amazing!! Thank you for the video.
You will have to go into raspberry pi config in the SSH to enable remote vnc. by using this command sudo raspi-config i do it all the time. once in there you have to find it. Sense i use a Raspberry pi 3B it is in the interface area. Not sure for other pi boards.
Great job. Works with wifi too. I'd rather not use wifi so that I don't have to log onto someones network to make my setup work (simulated PdP11). But switching from CLI to GUI does not work as shown using either ether net cable or wifi. The server appears to start (CLI prompt goes away and a ctrl Z results in a message that the server stopped) but the display does not change to GUI. Neither startx nor startlxde work. Does the GUI require the use of VNC?
Thank you so much. Worked with Raspberry Pi 3b+ connected to new Dell laptop with ethernet connection. Keyboard and mouse work fine too. Could you please write a small note in the video instructing to power off before removing the SD card from the Pi to create SSH file?
Thanks Saravanan for this great tutorials. I guess the only trick was to add ssh file to SD card. You can even add it using explorer but make sure you remove any extension. This is the solution to connection refused. I also used IP address instead of host name
Hello i turn my raspberry pi 3B into a NAS system. I was wondering if it is possible to create a link to the PC through the network wire same way you did as a Local drive?
Good tutorial. Everything is OK for me when connecting Raspberry PI to the router. Because the Ethernet interface in my laptop is not working, I use USB to Ethernet connection. But it does not work when connecting the Raspberry PI.
Hello, please tell me why I don't see the wireless icon on the panel, I add wireless&wired network like in your tutorial, but wireless do not appear on the panel, just wired network, how can I add? I have a raspberrypi 4 B/4Gb.Thank you.
Hello Saravanan! Thanks for the video. However I am facing an issue while using this method the second time. So, as I understand and please correct me if I am wrong. 1) Every time, if I want to access the my raspberry pi desktop I will 1st have to create an SSH folder in the SD card. 2) I did the same. But this time when I tried to access raspberry pi desktop via MobaXterm I got a Network error: Connection timed out. 3) I tried finding out the error and ran advanced IP scanner to trace the IP of pi, but the scanner is not showing the IP address of the PI. Please advise what I am doing wrong. PS I cannot share the screen shots here but would be happy to share the same.
Excellent tutorial sir. I have one question. I have a local web server (using xampp) on my laptop. However I want to connect my Raspberry to my laptop via ethernet cable for transferring files from Raspberry to Laptop to show some images and play some movies based on user request. The raspberry should use wifi (internet) to use internet same time thru ehternet cable files should be shared with laptop. Is it possible?
No problem to have wifi connection to pi and xampp at the same time. xampp uses an apache server to handle http requests. Here is a pi to pc ftp connection: ruclips.net/video/fVsjCX-82iw/видео.html
Dear Sir, Following your tutorial I had successfully used the laptop as the monitor for my raspberry pi 4 . However, of late when I am trying to do the same after connecting to the MobaXterm it is saying Connection refused. The raspberry pi is booting has the power LED on and on connecting the LAN to USB on my laptop and after disconnecting the wi-fi using the Advanced IP scanner it is showing the IP is alive and is pinging successfully. Could you say what could be the issue here
Thank you- excellent video! A few comments: - Perhaps you can put a text overlay on the video that explains how to set up the ssh file via the GUI, since some of us would prefer to control remotely, but DO have the rPi connected to an HDMI monitor. It will save some unnecessary steps. - For some reason, I show several Raspberry Pis when I do the scan, but only the one that shows the manufacturer name works. when I expand the other, it just shows an FTP folder (I"m not sure what that means) I wish RUclips had a "tip jar" tied to videos, as I would definitely pitch a few dollars in, just to say THANK YOU!
@@ramsabarish9011 Yes and tks for reply. i asked a question for my 14 yrs son. since then he has advanced and able to make few programms like touch less thermal camera and now learning deep neural network..
@@lahiruudara3356 i found the IP assigned to RPi is from different network from the Ethernet used in laptop. This is why we cannot find using the ipScanner. I don't know how to get the RPi to assign the same IP from the laptop Ethernet.
Saravanan Sir, I am new to Raspberry usage. I tried to connect to my laptop display, but mobaxterm terminal is showing network error: connection timed out. Any solution for this ?
I followed your instructions right to the end, but I never got the Wifi symbol. I got to log in to my pi, but now when I try to login with MobaXterm, it either times out or connection refused. What's happened?
I successfully connected my Raspberry Pi 4 to my laptop. I am trying to figure out how to use the terminal with my laptop and live stream a camera feed. I hope you could help me. Thank you!
Thank you for this video, though Advance ip scanner was unable to detect my pi so I used bridge connection to get my raspberry pi's ip on advance ip scanner.
Hi sir, i have respbery pi 4 and i try to connect to computer but its working with red light but not show on the network sections. what i will do on this situatations... please reply me urgently
I have my Raspberry Pi connect with Ethernet cable (straight cable) but it does NOT show in Advanced IP Scanner. I have shared the network also. Any suggestions. :-) I am using Kali Linux on my Pi and it does not have lxde so i tried to install it but it cant find the packages.
@@dipinadhikari9549 yah.....I kinda took alternative I used vnc in raspberry from their internal store...but for this u have to once connect ur raspberry to a display a mouse and keyboard and log in to the via internet....then u can ...just turn on the raspberry it will connect automatically to the network and it wil be shown in the vnc application installed in windows
on the first try everything worked well, but then when i tried connecting the pi for a second time it created a duplicate IP address and i could no longer remote login. please help
Hello Sir, I was installed win10 on Raspberry pi 3 and 4 but I can't install any program because it's tell me" to find the latest version of your PC Check with the software publisher" how can I fixed it I was download the local security policy and I did some settings on it but the problem unfixed please help me how can I fixed. Thanks
Hi :) I was able to detect the Pi's IP address like a week ago, but now I follow the same steps but the IP scanner does not show it anymore and I don't understand what the problem could be? Do you have any idea?
So thorough! There's literally nowhere you can get lost with your instructions. Perfection! Thanks a lot!
Thx I have been looking for how to use my laptop screen as a monitor for my Pi and this video really helped a lot :)
Finally I can run my Raspberry Pi from my laptop!!
First time a RUclips video has given me solution with no problem
A real hero who helped me ....this video is the one i was searching for
Do you know me?I was the small guy who came to your shop to buy things for my project..And you taught me that basic blink programme in arduino....And I bought a Raspberry pi....And Im from ooty....
I'm from Mysore!!
Asgardian here
Mars here :)
My simulations on humanity are going wrong!
Awesome.. Its working for me. Initially I tried with NOOBS connecting to BRAVIA TV via HDMI but didn't work. This is working Flawlessly. A Big Thank you ! Great Video !!!
Thank you very much I've been trying to get my raspberry running for so long
I have tried VNC viewer many times. but it doesn't work.
After using your method, I have received RPI screen on my laptop.
It was amazing!!
Thank you for the video.
You will have to go into raspberry pi config in the SSH to enable remote vnc. by using this command sudo raspi-config i do it all the time. once in there you have to find it. Sense i use a Raspberry pi 3B it is in the interface area. Not sure for other pi boards.
@@DiyintheGhetto i cant use wi-fi at rasp. I get attention no wireless no found
i am getting connection timed out noificatn on mobaterm, how to resolv it ?
We need more indians to do this kind of tutorials. Great work. Big thanks!
this video was the most helpfull video to resolving the network issue
thank you very much saravanan
Thanks sir! Everything looks easy, but we all owe you credit for that.
You, sir, deserve a medal
Very useful when you don't have a USB keyboard. Thanks!
This helped me for 3b+. Thanks
Thanks... i saw few videos before this one and only you were able to set a pretty good procedure that actually works!
Great job. Works with wifi too. I'd rather not use wifi so that I don't have to log onto someones network to make my setup work (simulated PdP11). But switching from CLI to GUI does not work as shown using either ether net cable or wifi. The server appears to start (CLI prompt goes away and a ctrl Z results in a message that the server stopped) but the display does not change to GUI. Neither startx nor startlxde work. Does the GUI require the use of VNC?
Thank you. I have been looking for this video👍 informative video for beginners.
Thanks Dear Saravanan..your video helped me to get going on Raspberry PI.
Thank you so much. Worked with Raspberry Pi 3b+ connected to new Dell laptop with ethernet connection. Keyboard and mouse work fine too. Could you please write a small note in the video instructing to power off before removing the SD card from the Pi to create SSH file?
best video ever for begineers
Thanks Saravanan for this great tutorials. I guess the only trick was to add ssh file to SD card. You can even add it using explorer but make sure you remove any extension. This is the solution to connection refused. I also used IP address instead of host name
Does this use all 8 connections from the ethernet cable or is there extra for other uses?
Hello dear... sorry for asking, can i use cat7 as an ethernet cable for raspberry pi 3b+?
Best video on that topic! Working for me! Thanks Saravanan AL
Raspberry Pi 3 Model B
Thank you very much for this awesome tutorial ! Doesnt work with NOOB, but flawless with official raspbian build
why does it not work with noob?
Very helpful,
especially the step of enabling ssh connection, and mobaxterm tool.
Thanks
indeed a really great video with the info being shared.
Hello i turn my raspberry pi 3B into a NAS system. I was wondering if it is possible to create a link to the PC through the network wire same way you did as a Local drive?
Good explanantion.. And I was searching for this video..
By far one of the better and simple Tutorials. Thank you SA!
Thank you Saravanan for this video.
Thank you very, I had struggled hard for this before watching this video!
Thanks Saravanan, it"s are best solution....
Good tutorial. Everything is OK for me when connecting Raspberry PI to the router.
Because the Ethernet interface in my laptop is not working, I use USB to Ethernet connection. But it does not work when connecting the Raspberry PI.
Sir when I enter the user name pi and password as raspberry it says access denied both in mobaxterm and putty
I have the same problem
Hello, please tell me why I don't see the wireless icon on the panel, I add wireless&wired network like in your tutorial, but wireless do not appear on the panel, just wired network, how can I add? I have a raspberrypi 4 B/4Gb.Thank you.
Man I love you !! Amazing tutorial!
Hello Saravanan!
Thanks for the video. However I am facing an issue while using this method the second time. So, as I understand and please correct me if I am wrong.
1) Every time, if I want to access the my raspberry pi desktop I will 1st have to create an SSH folder in the SD card.
2) I did the same. But this time when I tried to access raspberry pi desktop via MobaXterm I got a Network error: Connection timed out.
3) I tried finding out the error and ran advanced IP scanner to trace the IP of pi, but the scanner is not showing the IP address of the PI.
Please advise what I am doing wrong.
PS I cannot share the screen shots here but would be happy to share the same.
Thank you so much, it's save my so many hours of R&D
Will this work if you already set up your Pi with a fixed ip? Will windows still give it an ip address you can scan for? I don't think so?
Thanks for the tutorial. Worked like a charm! :)
Excellent tutorial sir.
I have one question. I have a local web server (using xampp) on my laptop. However I want to connect my Raspberry to my laptop via ethernet cable for transferring files from Raspberry to Laptop to show some images and play some movies based on user request. The raspberry should use wifi (internet) to use internet same time thru ehternet cable files should be shared with laptop. Is it possible?
No problem to have wifi connection to pi and xampp at the same time. xampp uses an apache server to handle http requests. Here is a pi to pc ftp connection: ruclips.net/video/fVsjCX-82iw/видео.html
we are using raspberry pi4 B, should we follow the same process?
Dear Sir,
Following your tutorial I had successfully used the laptop as the monitor for my raspberry pi 4 . However, of late when I am trying to do the same after connecting to the MobaXterm it is saying Connection refused. The raspberry pi is booting has the power LED on and on connecting the LAN to USB on my laptop and after disconnecting the wi-fi using the Advanced IP scanner it is showing the IP is alive and is pinging successfully. Could you say what could be the issue here
Same problem. I worked yesterday and it was working fine but today it is showing connect timed out
Any updates how you solved this problem?
Thank you- excellent video! A few comments:
- Perhaps you can put a text overlay on the video that explains how to set up the ssh file via the GUI, since some of us would prefer to control remotely, but DO have the rPi connected to an HDMI monitor. It will save some unnecessary steps.
- For some reason, I show several Raspberry Pis when I do the scan, but only the one that shows the manufacturer name works. when I expand the other, it just shows an FTP folder (I"m not sure what that means)
I wish RUclips had a "tip jar" tied to videos, as I would definitely pitch a few dollars in, just to say THANK YOU!
it works!! I used M0baxterm personal edition as my GUI!
This worked like a charm.thanks.
thanks for the video but you should also put a tutorial video and teach us how to enable ssh by connecting raspberry to monitor via hdmi cable...
Super Cool Tutorial. Its quite simple. Thanks
Perfect tutorial sir, thanks. Managed to connect to the Pi.
I am getting an error with startlxde that "cannot open display: localhost 10.0"
@@IoTLearner same here
@@aman72kamboj now u fixed?
@@ramsabarish9011 Yes and tks for reply. i asked a question for my 14 yrs son. since then he has advanced and able to make few programms like touch less thermal camera and now learning deep neural network..
well done man!
Thanks for the good description!
This is great!! I used this successfully for some time, but now advanced IP scanner cannot identify the pi. Any advice?
Same here. Did you find the solution to this problem?
@@anuradharavi8745 Unfortunately no. It is not consistant. Sometimes it happens, sometimes not.
@@lahiruudara3356 i found the IP assigned to RPi is from different network from the Ethernet used in laptop. This is why we cannot find using the ipScanner. I don't know how to get the RPi to assign the same IP from the laptop Ethernet.
My raspberry didn't setting for login, earlier it did. Now it shows network error: connection timed out. Can you help
Thanks brother this tutorial helps me a lot.
can u make video. i m getting error message
Hi, I dont have sharing tab in my wireless network connection properties. How to enable it. I am with Win 11 Pro
Really helpful video. Worked for us.
I just want to connect the pie to the laptop for faster rom transfers. Not graphical use. Do I still have to do all these steps,?
thanks a lot it worked but i used putty and vnc server
Saravanan Sir, I am new to Raspberry usage. I tried to connect to my laptop display, but mobaxterm terminal is showing network error: connection timed out. Any solution for this ?
Wonderful tutorial. Thank you so much.
Thanks for the effective video, though this process works for booting kali? // I mean creating ssh n all //
I followed your instructions right to the end, but I never got the Wifi symbol. I got to log in to my pi, but now when I try to login with MobaXterm, it either times out or connection refused. What's happened?
Same problem. How did you solve it ?
@@nehashaw7196 same problem, have you got any solution?
Brilliant tutorial. Mad respect.
Thank you sir !! This method totally worked for me 👍
I successfully connected my Raspberry Pi 4 to my laptop. I am trying to figure out how to use the terminal with my laptop and live stream a camera feed. I hope you could help me. Thank you!
Thanks worked for me on the raspberry pi 3b+
sir my raspberry pi ip is not found by the advanced ip scanner
Thank you this is very very very helpful!!!
Nice Video...But I'm not getting Desktop Screen after "startlxde" command. Kindly Help
I am facing same problem. It's says command not found
So do you need to connect the hdmi cable to the laptop?
Hi. I was wondering. After connect raspberry pi. Will I be able to disconnect and use laptop as normal?
U got a point 🙌🏻... please reply
Mr-saranavaran
Thank you for this video, though Advance ip scanner was unable to detect my pi so I used bridge connection to get my raspberry pi's ip on advance ip scanner.
can you please tell me how to use bridge connection. I have the same problem, IP scanner was unable to detect my raspberry pi's IP
Do you have to do this every time?
Sir for ,Raspberry pi 2 model B we can follow this procedure??
Whether THIS WILL WORK FOR SURE?
Thanks this worked for me!
Can we use this procedure with raspberry pi model B which doesnt have wifi ??
Thank you sir, your tutorial very help me to connect raspberry PI 3 on my windows 7. :D
Worked for me! Thanks!
It was genuinely helpful. Thank you.
Do I still need a separate keyboard to interact with the Pi when using this method?
thank you for providing the ssh file!! it worked finally
for me also its required plz help me
mailid-kodurprashanth@gmail.com
Hi sir, i have respbery pi 4 and i try to connect to computer but its working with red light but not show on the network sections. what i will do on this situatations... please reply me urgently
good tutorial, but when using startlxde i am getting error command not found. I am using OSMC. please help?
Any idea, how to solve this problem
My laptop doesn't have ethernet port
will usb to ethernet work?
I have my Raspberry Pi connect with Ethernet cable (straight cable) but it does NOT show in Advanced IP Scanner. I have shared the network also. Any suggestions. :-) I am using Kali Linux on my Pi and it does not have lxde so i tried to install it but it cant find the packages.
Hello friends
Why can not I share wifi with another IP address for Pi3?
At 0:56 'can not be clicked on
if you find solution plz tell me
Sir I am using Mobile Hotspot. It will work ?
HI please help. My Pi 3 B+ is unidentified by my laptop. I am using WIFI and the connect the Pi to a laptop. Can you please help.
Hello sir, i am new to Raspberry...from where to install command prompt?
xD search for cmd on your computer, it comes preinstalled.
I can't locate my IP of my rasberry.... Does my rasberry have to be connected to a same WiFi as my laptop.
I have also same problem. Do you solve it?
@@dipinadhikari9549 yah.....I kinda took alternative I used vnc in raspberry from their internal store...but for this u have to once connect ur raspberry to a display a mouse and keyboard and log in to the via internet....then u can ...just turn on the raspberry it will connect automatically to the network and it wil be shown in the vnc application installed in windows
This is a great tutorial, thank you for providing such an indepth tutorial. Keep up the great work!
my wifi properties do not have 'local area connection'
on the first try everything worked well, but then when i tried connecting the pi for a second time it created a duplicate IP address and i could no longer remote login. please help
Fine Sir, But execution is very slow, sometimes session gets aborted. can you pl tell how to rectify
Thank you so much sir 😇
Hello Sir,
I was installed win10 on Raspberry pi 3 and 4 but I can't install any program because it's tell me" to find the latest version of your PC Check with the software publisher" how can I fixed it
I was download the local security policy and I did some settings on it but the problem unfixed please help me how can I fixed. Thanks
It works fine after doing it can't access the picamera it shows out of resources
Hi :) I was able to detect the Pi's IP address like a week ago, but now I follow the same steps but the IP scanner does not show it anymore and I don't understand what the problem could be? Do you have any idea?
does it work on raspberry pi zero ?
Thanks alot sir You deserved applause 👏👏👏👏