There are two possibilities * SSH file is not created properly resulting in failure in SSH enabling. * WiFi configurations are not correct. There might be problem with WiFi settings. After boot SSH and wpa_supplicant.conf files will get deleted For more details visit to github.com/samvidita/Connect-RaspberryPi-to-laptop-wirelessly
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
While connecting with SSH, it displays error msg: host does not exist. Not able to connect the pi. Not able to understand when the pi boots, where to get the hostname or ip address of the pi. How to check whether wifi of pi is enabled or not? Please help
during the process of establishing connection between raspberry pi using putty do i need to connect my laptop with raspberry through a lan cable or not needed?
whenever I try try to flash os into sd card after verification it shows 'verifying write failed contents of sd card is different from what was written to it.
How to connect it raspberry to laptop?? Last you say remove sd card and insert raspberry pi 5:26 I can't understand and my raspberry pi don't have any ethernet cable it's model 3 model a+
It's because ssh is not enabled properly or the network details you entered is not proper check it properly. We have given github link in description copy the text from there. If you come across any issue DM us on Instagram.
Yes you can follow same procedure on MAC * there is imager for MAC * Instead of putty u can use terminal. Just type 'ssh pi@raspberrypi.local in terminal. * There is vnc for MAC too. Rest all the procedures are same (creating ssh file and wpa file) Yes the syntax for creating ssh file is different in MAC
Try with raspberrypi once instead of raspberrypi.local and check your network connection also if wireless is not working then just connect LAN cable and check once
@@rajagopalanvg2142 nope I just bought a monitor. I think u need to set up ur pi with ur wifi first before you can do this. And the easiest way is to used a monitor and then after you can use VNC viewer with your pc.
@@tonykoulong9458I was able to resolve the issue today, watch this video ruclips.net/video/nZyyfJYOhbM/видео.html before watching this, while installing you should enable the SSH and set the WLAN configurations and then it works fine for me. I know that you have figured out other way, but this will be useful for others in future. Hit a thumbs up, if it is helpful.
Kindly update your raspberry pi imager there after selecting OS you get advanced options settings. Please click on that and configure your pi. This is the ne update. There you can add ssh file and wireless settings including pi password
![Yeat & Summrs - GO2WORK [Official Music Video]](http://i.ytimg.com/vi/NEFEwfPcXRA/mqdefault.jpg)
Very Well explained, nice.
While using Putty to make an SSH connection, I am getting an error that the Host doesn't exist. Why is it so. And how to correct it.
And after i checking for the Wifi file again in the SD card it is not there.
There are two possibilities
* SSH file is not created properly resulting in failure in SSH enabling.
* WiFi configurations are not correct. There might be problem with WiFi settings.
After boot SSH and wpa_supplicant.conf files will get deleted
For more details visit to github.com/samvidita/Connect-RaspberryPi-to-laptop-wirelessly
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
@@SaMvidita Thanks for replying. The raspberry has started working. I don’t know how but i just copied the code from where you have mentioned in the video instead of writing it and it worked. Thanks again.
having the same issue
so simple and well explained! thank you
we can do it without creating 2 files (ssh and wpa-supplicant) just by clicking Ctrl-Shift-X
This solved my issue 😊thanks
Very helpful video for students
awesome bro, i learned something new today 😃😃
Thank you
While connecting with SSH, it displays error msg: host does not exist. Not able to connect the pi. Not able to understand when the pi boots, where to get the hostname or ip address of the pi. How to check whether wifi of pi is enabled or not?
Please help
same error,,,did you fix it?
@@surendarpc6007 I got the same error host does not exist. Did you solve it?
@@ayanpal5507 yes,,, pi not connected to wifi network hence it shows host doesn't exist...I using pi ip to login ,,,,now ssh is activated
@@ayanpal5507 I download the lite version software ,,,at this only our pi is connected to wifi and upgrade to desktop version
Can you do all of this with flash card but not micro sd
Yes you can
Very useful bro thank u
thanks man you made my day
during the process of establishing connection between raspberry pi using putty do i need to connect my laptop with raspberry through a lan cable or not needed?
If you are using WiFi to connect then no need to connect LAN cable
i checked the ssh file and the network file everything is fine but too my raspberry wont connect
hey, whenever i try to ssh into it through putty, it shows "connection refused". How do I fix that?
Please check your network connection
thxx broo it worked!!!🥳🥳
Sir when we open the putty download link, there are many options. Which one to select
If you are using Windows then go to MSI installer. Select depending on your system size (32bit / 64bit)
@@SaMviditaokay thank you
whenever I try try to flash os into sd card after verification it shows 'verifying write failed contents of sd card is different from what was written to it.
After putty installation, it says host does not exist
Can we power the raspberry pi from the same laptop in which putty is installed?
If you are using Pi 4 it is not recommended. It will harm the pi. Power it using suitable adapter.
After flashing the sd card, when we remove and insert the card again, there is no partition.. It only shows boot drive
Yess boot drive itself is a partition. Check whether OS flashed properly or not then create necessary files
How to connect it raspberry to laptop?? Last you say remove sd card and insert raspberry pi 5:26 I can't understand and my raspberry pi don't have any ethernet cable it's model 3 model a+
There is a problem in putty and I want to delete it and download again, but it's not getting deleted. why
Goto control and uninstall it from there
I don’t get wifi in this raspberry screen what I do.
Does it work if network is mobile hotspot?
Yes
Sir after putty, it is only showing host does not exist
What to do sir
Please help
It's because ssh is not enabled properly or the network details you entered is not proper check it properly. We have given github link in description copy the text from there. If you come across any issue DM us on Instagram.
how much long we can use raspberry pi connected to monitor ?
What about mac can we follow the same procedure keeping in mind that we have different syntax for creating a ssh file?
Yes you can follow same procedure on MAC
* there is imager for MAC
* Instead of putty u can use terminal. Just type 'ssh pi@raspberrypi.local in terminal.
* There is vnc for MAC too.
Rest all the procedures are same (creating ssh file and wpa file)
Yes the syntax for creating ssh file is different in MAC
@@SaMvidita Thanks a lot!
How can i fix " Software caused connection abort" sir??
unable to connect to raspberrypi.local host does not exist
Try with raspberrypi once instead of raspberrypi.local and check your network connection also if wireless is not working then just connect LAN cable and check once
Do we need to connect ethernet cable to raspberry Pi at start
If you are connecting wirelessly then no need of using ethernet cable
Thanks A Lot For This Video
Thank you keep supporting
@@SaMvidita Sure
Thanks for the video
For me it says "Unable to open connection raspberrypi.local host doesn't exist." How do i fixed this?
Same issue man, Were you able to resort it?
@@rajagopalanvg2142 nope I just bought a monitor. I think u need to set up ur pi with ur wifi first before you can do this. And the easiest way is to used a monitor and then after you can use VNC viewer with your pc.
@@tonykoulong9458I was able to resolve the issue today, watch this video ruclips.net/video/nZyyfJYOhbM/видео.html before watching this, while installing you should enable the SSH and set the WLAN configurations and then it works fine for me. I know that you have figured out other way, but this will be useful for others in future. Hit a thumbs up, if it is helpful.
@@rajagopalanvg2142 thanks man did you face this problem like host name doest exist or raspberry doesn't connect to wifi same like me?
@@gunasekharreddy4273 Yes dude
It says access is denied when I try to create ssh in cmd, how do I solve this?
Try run as administrator for command prompt.
@@molupiyush007 yeah, now its working, thanks!
How can I access finish button..?
Use arrow keys
it says access denied after typing password in putty
Please check if have given any custom password
@@SaMvidita well I even formatted the sd card and added new os
Kindly update your raspberry pi imager there after selecting OS you get advanced options settings. Please click on that and configure your pi. This is the ne update. There you can add ssh file and wireless settings including pi password
@@SaMvidita i bought a new raspi and installed imager newly
@@SaMvidita "Default "pi" user has been removed; the first-boot wizard enforces the creation of a new user account"
So, Putty does not works
How do I know my country code?. It's Nigeria
Please refer to this link
countrycode.org/