I don't know about you, but anytime I want to throw away MY empty peppermint schnapps bottle, I always take it to the local laundromat to put in their garbage. 😂😂😂😂
The floor can be fixed if you have extra vinyl, just lay extra (match pattern) use a razor knife to cut through both layers remove damaged area, glue in new piece.
The Wrinkle Prevent option periodically tumbles, rearranges, and fluffs the dried load to help keep wrinkles from forming after the drying cycle is complete.
This is hilarious 😂! BOLO Runaway Washing Machine AT LARGE.... Reward, if found dead or alive. You DO have some interesting properties. Please continue the excellent work 🖖🙏
So glad I watched the video to the end bcuz I was going to say that it prob shimmied its way out of its spot during the spin cycle. We had a machine that would walk across the floor like that. 🤦🏾♀️🤦🏾♀️ So sorry you are having so many issues. 😔🙏🏾
Suspension/Dampeners have snapped. These machines are awful. They should never be allowed for commercial use. Maybe semi commercial. Keenan had the right idea with these machines
This laundromat is turning into Christine! Have you decided about renting out the shop space in the back? You could take that money to upgrade some machines.
I watched the short it never occurred to me it was taking a walk on its own! I do remember my lighter weight washing machine moving a bit with a heavy load. Yep I'd say dryers have a fluff setting. Well mystery solved. Hope the rest of the week goes well and uneventful!
Yes the dryers have a wrinkle guard.. which will regularly spin them clothes if the doors not opened for a long period when the dryer stops. It’s about time you replaced the washers? These are just household machines! Electrolux sell commercial washers soft mount (so can go direct on the floor). Can get bigger washers too which are where the money comes in people wanting a bigger wash.
I did not expect to see the washer walking away on its own, trying for the door, lol !!! I have had a machine move before, but just an inch or so, never saw anything like that !!!
Some dryer models also have a wrinkle setting (low heat) at the end of the full cycle. With that washing machine it looks like something is very off balanced.
I have seen it in my building there is a setting on some dryers if it ends and you don't open it and take the cloths it will spin up every now and then after I would assume to prevent wrinkles. DOn't think there is heat though. The machine that was pushed out looks like the drum was broken off the mount in the back.
Look up speed queen extended tumble mode. Not sure if you can disable it, but it will turn on for 2 minutes every hour for 18 hours if no one interacts with the machine after it finishes. Sounds like the washer at the end threw its belt since you can hear the motor. The first one probably lost a suspension component.
The solution to stopping the machines from moving is simple and very inexpensive all you do is get a piece of steel angle iron the length and width you need then you drill holes about every foot and then either tapcon it to the concrete or you install what we use when installing car lifts in shops its a anchor bolt and it works . just prime and paint the steel on all 4 sides and install . that machine might have been off balance to dance around not uncommon to bad they dont do what they do to top load washers take one apart and chances are youll find 2 concrete blocks one on each side of the base of the drum .
It looks like the drum in that washer went completely off kilter. They have springs inside and I suspect one or more broke. I've had that happen before :-)
I was gonna say "These people act like they're the maintenance person," but now I agree with everyone else in the comments. This laundromat is possessed.
I have a feeling there was some heavy clothes in that washer. I've seen it do it with the older ones like the ones next to it so I believe it was either overfilled or something extremely heavy in there that did it you may want to post the weight limit for those washers.
looks like the drum support broke on that washer. the cabinet is all dented probably because it was spinning then the drum basically flew around inside.
You have some rare machines, I know this is a laundromat chanel but if you could record a full cycle of that GE commercial filter flo full cycle, and you might need to change the belt on the speed queen dryer or bearings and that speed queen front loader might be possessed starting on its on😂😂😂😂
People do over stuff the washers to try n get more clothes washed . Causing the washer to go crazy when spin cycle engage . Realize the clothes are heavy and wet when it engage into spin cycle it will make the washer go crazy because of the weight of the wet clothes . Post on the washers n on the walls to not overload washers or dryers
thats what happens when you try to wash your bowling balls btw the famous put a brick in your washer vid.. tried it with an old one before trashing it.. it was as destructive as the original the new one has a sensor and stops if the load is too unbalanced
@@joywebster2678 I know I suggested a cement floor but I don't know what he has below that, if it's a plywood base. I don't know if you can do cement over plywood. :)
@@L.Spencer he has told his floor build over and over, and why it impedes heavier machines. Did it on small laundry video this weekend. You say you saw him put in the flooring a year ago...so I'm asking your concrete knowledge since you are suggesting it. At least my grandfather was a flooring expert, and I grew up around him.
I been thinking for a long time how to make this site work for a business. It seems the owner needs to live in the attached apt. Then they could care for the site daily. Now, the laundry is not even making enough to afford the mortgage. So the owner/operater would need second income from job or additional second business for which they could use the garage. Or change the type business for the whole site.
This laundromat is possessed.
6:31
So is this year. Good news...the best is yet to come.
Tim hunkin sabotaged the washing machine
I don't know about you, but anytime I want to throw away MY empty peppermint schnapps bottle, I always take it to the local laundromat to put in their garbage. 😂😂😂😂
I think a short of the washer walking out by itself would be a hit.
You threw out those religious pamphlets, the Spirits are taking revenge!! 😊
Omg yes 😂
Your Laundromat is haunted! 😂 You have the most entertaining properties
The floor can be fixed if you have extra vinyl, just lay extra (match pattern) use a razor knife to cut through both layers remove damaged area, glue in new piece.
At least you know there ARE nice people out there. They were trying their best to figure out the haunted machine. 🤪
The small door washer has broken shocks. The large door probably has a plugged pump. The dryers definitely need rollers.
The Wrinkle Prevent option periodically tumbles, rearranges, and fluffs the dried load to help keep wrinkles from forming after the drying cycle is complete.
I love this channel! 🤩 Sooooo interesting!
you would do well to get rid of the horizon washers they are junk got rid of mine years ago
That machine drum is so destroyed you might have to scrap it lol
You could number your machines, so if there is a problem the customer could let you know specifically which machine has a problem.
This is hilarious 😂! BOLO Runaway Washing Machine AT LARGE.... Reward, if found dead or alive.
You DO have some interesting properties. Please continue the excellent work 🖖🙏
So glad I watched the video to the end bcuz I was going to say that it prob shimmied its way out of its spot during the spin cycle. We had a machine that would walk across the floor like that. 🤦🏾♀️🤦🏾♀️
So sorry you are having so many issues. 😔🙏🏾
it does not like it there
@@investfourmore 😄😄😄😄
I'd say!
Someone must have put something very heavy in that machine and must have been very off balance for it to do that.
As much as the maintenance may be daunting on this little place it's one of the most entertaining watches
the little laundromat that could
My washing machine has tried escape few times! Last time it happened there was a blanket in it, it was heavy!
Suspension/Dampeners have snapped. These machines are awful. They should never be allowed for commercial use. Maybe semi commercial. Keenan had the right idea with these machines
This laundromat is turning into Christine! Have you decided about renting out the shop space in the back? You could take that money to upgrade some machines.
It's up for rent...no takers yet.
My washer does that when I wash something heavy like pillows or blankets and they get off balance.
I watched the short it never occurred to me it was taking a walk on its own! I do remember my lighter weight washing machine moving a bit with a heavy load. Yep I'd say dryers have a fluff setting. Well mystery solved. Hope the rest of the week goes well and uneventful!
Yes the dryers have a wrinkle guard.. which will regularly spin them clothes if the doors not opened for a long period when the dryer stops.
It’s about time you replaced the washers? These are just household machines!
Electrolux sell commercial washers soft mount (so can go direct on the floor). Can get bigger washers too which are where the money comes in people wanting a bigger wash.
I did not expect to see the washer walking away on its own, trying for the door, lol !!! I have had a machine move before, but just an inch or so, never saw anything like that !!!
Some dryer models also have a wrinkle setting (low heat) at the end of the full cycle. With that washing machine it looks like something is very off balanced.
My washer will walk out if I wash blankets in it.
If you still have some of the vinyl flooring left, you can easily patch it.
I have seen it in my building there is a setting on some dryers if it ends and you don't open it and take the cloths it will spin up every now and then after I would assume to prevent wrinkles. DOn't think there is heat though. The machine that was pushed out looks like the drum was broken off the mount in the back.
Look up speed queen extended tumble mode. Not sure if you can disable it, but it will turn on for 2 minutes every hour for 18 hours if no one interacts with the machine after it finishes.
Sounds like the washer at the end threw its belt since you can hear the motor. The first one probably lost a suspension component.
Are you going to evict the rogue washing machine?
yes
Mark you should get some L brackets and secure them to the wall or banister. You can use self tapping screws.
Now you need to make a movie about it clothesterguiest.
lol
Maybe a counter weight broke internally or the suspension spring broke.
The solution to stopping the machines from moving is simple and very inexpensive all you do is get a piece of steel angle iron the length and width you need then you drill holes about every foot and then either tapcon it to the concrete or you install what we use when installing car lifts in shops its a anchor bolt and it works . just prime and paint the steel on all 4 sides and install . that machine might have been off balance to dance around not uncommon to bad they dont do what they do to top load washers take one apart and chances are youll find 2 concrete blocks one on each side of the base of the drum .
Sorry, I know it's not funny but I laughed when you showed the washing machine go nuts at the end. That's crazy!
The dryers have wrinkle guard on. That’s why they tumble some more
It looks like the drum in that washer went completely off kilter. They have springs inside and I suspect one or more broke. I've had that happen before :-)
Dat machine needs a preist call da VACTIAN!immediately...
shock broke, also check for nail in the dryer or check the fan, lower window remove
Front loaders need bases
I'll be interested to see what you do with the floor. Have you considered epoxy?
I was gonna say "These people act like they're the maintenance person," but now I agree with everyone else in the comments. This laundromat is possessed.
Washer doing it dance for your customers. This is just crazy week for you.
I have a feeling there was some heavy clothes in that washer. I've seen it do it with the older ones like the ones next to it so I believe it was either overfilled or something extremely heavy in there that did it you may want to post the weight limit for those washers.
So sorry.
looks like the drum support broke on that washer. the cabinet is all dented probably because it was spinning then the drum basically flew around inside.
You love all the drama mark !! lol 😂
the secret life of machines
lol
@@investfourmore ruclips.net/video/SgWh-5DsiQM/видео.html
You have some rare machines, I know this is a laundromat chanel but if you could record a full cycle of that GE commercial filter flo full cycle, and you might need to change the belt on the speed queen dryer or bearings and that speed queen front loader might be possessed starting on its on😂😂😂😂
That possessed machine probably had a load that was way off balance.
Machine was overloaded and off balance. Mine, at home, did the same a time or two.
It must be such a low margin business but good on you trying to make it better for the community.
Did someone try stealing parts?
the end shows it
Those washers have a very poor history, don't keep using them, if possible.
Is it a washer or a Gonk droid from Star Wars? LOL
People do over stuff the washers to try n get more clothes washed . Causing the washer to go crazy when spin cycle engage . Realize the clothes are heavy and wet when it engage into spin cycle it will make the washer go crazy because of the weight of the wet clothes . Post on the washers n on the walls to not overload washers or dryers
😅. It Wants to go on vacation! 😂. 🏃♂️
Got any extra machines in the warehouse? Time to retire that one. LOL.
Tell that machine to get itself together and start making some money so it can pay you for the floor repair 😂
lol
Hahaha crazy. I wasn't expecting that.
Haunted...where is the new home? Recycle center or landfill?
haha
thats what happens when you try to wash your bowling balls
btw the famous put a brick in your washer vid.. tried it with an old one before trashing it.. it was as destructive as the original
the new one has a sensor and stops if the load is too unbalanced
lol
I will say it is time for you to get brand new washers and dryers so you don’t have any problems
I was thinking when you put that flooring in it might not stand up to the possible damage. Maybe cement floors would do better in the long run.
Can you pour cement on top of simple plywood flooring? My grandfather would suggest a stone tile, or heavy vinyl tile vs linoleum.
@@joywebster2678 I have no idea :)
@@L.Spencer you suggested it.
@@joywebster2678 I know I suggested a cement floor but I don't know what he has below that, if it's a plywood base. I don't know if you can do cement over plywood. :)
@@L.Spencer he has told his floor build over and over, and why it impedes heavier machines. Did it on small laundry video this weekend. You say you saw him put in the flooring a year ago...so I'm asking your concrete knowledge since you are suggesting it. At least my grandfather was a flooring expert, and I grew up around him.
I been thinking for a long time how to make this site work for a business. It seems the owner needs to live in the attached apt. Then they could care for the site daily. Now, the laundry is not even making enough to afford the mortgage. So the owner/operater would need second income from job or additional second business for which they could use the garage. Or change the type business for the whole site.
You need to learn how to rapid advance your washes.
That place is haunted
Did you see what she had in that machine?
Someone has put too much in the machine or put something in so it was unbalanced.
Gremlins
Horizon is Speed Queens big flop
Kind of reminds me of this washer that had a slight imbalance issue:
ruclips.net/video/dq6T5BojXc8/видео.html
Ghosts or poltergeist?
Junk machine
Put this place up for sale, it has not been a great investment for you!
No! It's too entertaining!