That was awesome, Adam! Both finishes are good , however do you apply any ‘clear’ treatment to stop tarnishing ? If so , it wud be good on the polished ones ! Where can I get coin moulds made ? Cheers, we’ll done! 🖖
@@ArtByAdrock what do you think about the world cup qualifying session with the almost coolness and the other hand is the best possible freelance work with the light bulb
you done it again mate, I like the both versions of the coin. Great video there Mr Rock and all the coins turned out perfectly. see you next week for another great episode 👍🌟🌟🌟🌟🌟💖
Can't really make a call on the better ones. Both polished and buffed looked fantastic in their own way. You just keep getting better and better as each week passes. Absolutely love your work and effort to make each video. Thank you for sharing and stay safe. 👍👍👍
I love how you keep changing how you make molds. I really like the way to used the molds to make a wax copy. It gave me a couple of ideas. Thanks for the great videos
ADAM nice job on those coins I think I like it better unpolished dont get me wrong I do like them polished as well but the unpolished ones look older and much better in my opinion lol 👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
Could you PLEASE do a video about how you modified your vacuum chamber / "Vac-Caster" ? I am looking to take my new hobby/ obsession ( if you're asking my girlfriend ;) to the next level and any advice would Really help!!! Thank You for all you do and Smelt Happy!! Smelt Safe!!!
Alhamdulillah,good idea and good information only for myself also it show me how our life begin and startup exactly from scratch to something valuable,same like this video clip from scratch metal to become a coin that valuable.
Like both versions for different reasons. Don't know if you did it on purpose or just by chance but noticed what section of the phone book you used, "A" 👍👍
I wear any eyepatch-same as a Pirate and little kids ask me if I am one and I play it up for them-been wanting to cast some brass or bronze "Pirate Treasure' coins to hand out to them. You know-it never occured to me to melt my wax in the Nuker... lol
Hey brother could you possibly let me know where to find the silicone mat your using to put your flask down on ? Love your videos btw lol how could you not. Thanks for the help if u can.
Love what you make. Can you make a Freemason, Royal Arch Mason, Order of Royal Select Masters, Shriner or Knight Templar design? I'm all of those and would love seeing it so I can show the video at my Lodge, Chapter, Council and Commandery meetings. Thanks
Awesome video bro but I have few questions though.please can you tell me which machine did you use to cut down and polish the coins?what are they called? And if I cannot get them where I live which hand tools will be the best altenatives for those machines?
Really awesome technique using melted wax between 2 molds to make the coin shape for the tree mold. You make some amazing stuff and I'm looking forward to trying my hand again at melting metal in the fall. Lol I can't melt in 109°F weather. I haven't gotten that hardcore yet lol.
Sadly... My coins will be made with... 1gram of .999 silver shot. Far to small for casting method. But your method is perfect if I ever make larger coins. Is also perfect for making medallions to adorn my official uniform once I get it. Good job.
I was just thinking about how one could make copies of replica coins out of real material. I recently purchased a few copies of obsolete coins that I had been playing around with the idea of casting them out of real brass/silver or possibly even gold over the copper that these are made out of.
Would you be interested in making coins for my team? We shoot 100s of 1000s of .50cal and 7.62 rounds and I’ve always wanted to do something with all that brass I stead of “recycling”. Let me know, thanks.
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
Happy Thursday everyone! I hope you all enjoy this video and have a great weekend! See you all next week! 🍻
Make Thursday tutorial day
Very informative bruv. Thx man
No problem
That was awesome, Adam! Both finishes are good , however do you apply any ‘clear’ treatment to stop tarnishing ?
If so , it wud be good on the polished ones !
Where can I get coin moulds made ?
Cheers, we’ll done! 🖖
Make a shurinkein
Mmmm You can never have enough coins, the double sided mold is awesome 👏🏻 😎
Thanks brotha! 👍🏻🍻🍻
@@ArtByAdrock what do you think about the world cup qualifying session with the almost coolness and the other hand is the best possible freelance work with the light bulb
*100% true ;)*
They turned out really good!!
you done it again mate, I like the both versions of the coin. Great video there Mr Rock and all the coins turned out perfectly. see you next week for another great episode 👍🌟🌟🌟🌟🌟💖
Can't really make a call on the better ones. Both polished and buffed looked fantastic in their own way. You just keep getting better and better as each week passes. Absolutely love your work and effort to make each video. Thank you for sharing and stay safe. 👍👍👍
I like the unpolished ones the best!!
Have a GREAT Day!!!
I love how you keep changing how you make molds. I really like the way to used the molds to make a wax copy. It gave me a couple of ideas. Thanks for the great videos
Love the shine. You make it look so easy. You've got some skills man.
Another great melt thanks again Mr Adrock always giving use new ideas to try and master
Most people: Throw out brass and copper shavings.
ArtByAdrock: Turns the shavings into beautiful coins.
Both ways look cool
I like the unpolished ones better. Great video. Thank you for sharing.
I think I like the unpolished ones better this time!
Awesome video, love them shiny but I'm starting to like the tumbled one's as well 👍
ADAM nice job on those coins I think I like it better unpolished dont get me wrong I do like them polished as well but the unpolished ones look older and much better in my opinion lol 👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
Dude, this is badass. Great job, the equipment is awesome, I'm jelly
For me, the tree looked very very nice🤗. Same for the coins. I like the polished more, because I like the shining😄. Keep going👌
I like them all. Well done!!!
Very nice coins, Both versions looked good. Whenever your down for a coin swap, let me know.
Those coins came out very well🙃
Brilliant, excellent video and I picked up several awesome tips that were simple but just really well thought out. Great job.
Great pour as always!!
I am really loving the loss molds! they really turn out nice. the detail!
Could you PLEASE do a video about how you modified your vacuum chamber / "Vac-Caster" ? I am looking to take my new hobby/ obsession ( if you're asking my girlfriend ;) to the next level and any advice would Really help!!! Thank You for all you do and Smelt Happy!! Smelt Safe!!!
I like the non-polish ones they just look more hand made.
I like the unpolished 🙂
I'll take the left one, thanks ❤️
Awesome job! As usual!
Would you consider making one sided coin replicas if I provided the mold for the wax or the wax coins?
One of my favorite vids so far
Perhaps a video on how to make custom coin press dies for stamping the relief (design) into blanks.
very good video
Alhamdulillah,good idea and good information only for myself also it show me how our life begin and startup exactly from scratch to something valuable,same like this video clip from scratch metal to become a coin that valuable.
Nice coins! You should do another casting challenge with BigstackD and VOG again, it's been a while.
Like both versions for different reasons. Don't know if you did it on purpose or just by chance but noticed what section of the phone book you used, "A" 👍👍
I kind of like both the polished and unpolished coins. I think depending on the project, some things might look better one way versus the other.
Craftsman!!
I wear any eyepatch-same as a Pirate and little kids ask me if I am one and I play it up for them-been wanting to cast some brass or bronze "Pirate Treasure' coins to hand out to them. You know-it never occured to me to melt my wax in the Nuker... lol
You should create a collectable set of coins for some sort of accomplishments
Super.
How does the brass look coming straight out of the graphite mold?
Congratulations
Awesome coins. I personally like the polished ones.What is the mold made out of?
Nice coins i think they turn out good i pefer the ones that were in the tumbler though they have more of a rustic look to them
Awesome
sweet!!!!! Id love to find a double sided mold like that for my channel. Did you make that one or order it? Great video as per usual!
The coins turned out very well. 👌 I like the looks of the polished one.
Very good :D
COOL! Those turned out very nicely, thank you for sharing the process with us
The unpolished one looks more valuable!
I'd be in need of a couple of coin molds. They wouldn't hurt me hahaha
they are a little bit big, and i prefer smaller and thinner ones, but they still look amazing!
They turned out well. You can just give them a quick polish after tumbling.
Wow. That some serious skills. I been wanting to do coins as well. Maybe this will get me to try it. Your channel is what inspired me. Thank you.
Hey brother could you possibly let me know where to find the silicone mat your using to put your flask down on ? Love your videos btw lol how could you not. Thanks for the help if u can.
What or how do you make the little wax sticks that connect the coins to the wax dowel you use to make the mold? Are they called sprews?
What’s the type of tumbler you are using to polish . Thank you
Good job on those 👊🏻
Those are nice! I like the polished ones! 😁
Hi im a big fan and my mom is friends whith u 💓
I would really like to do this. Where can I get this equipment?
Love what you make. Can you make a Freemason, Royal Arch Mason, Order of Royal Select Masters, Shriner or Knight Templar design? I'm all of those and would love seeing it so I can show the video at my Lodge, Chapter, Council and Commandery meetings. Thanks
@@dement3djoker another uneducated response. Clearly it's from a lack of intelligence on the subject on your part
Awesome video bro but I have few questions though.please can you tell me which machine did you use to cut down and polish the coins?what are they called? And if I cannot get them where I live which hand tools will be the best altenatives for those machines?
It’s called a Dremel tool (many companies make them, but the most popular manufacturer is Dremel).
I think the non polished ones look better. More collector worthy
How did you create the mold? Is it 3D printed?
And my day just got better! Thanks for the vid mate.
Really awesome technique using melted wax between 2 molds to make the coin shape for the tree mold. You make some amazing stuff and I'm looking forward to trying my hand again at melting metal in the fall. Lol I can't melt in 109°F weather. I haven't gotten that hardcore yet lol.
Do you hand carve your graphite molds?
Do you collect and remelt any slag and/or grinding dust like the bigstackD channel guy does?
Wih mantap itu caranya keren
When will you having another contest to gi e out more stuff? Totally would love to win a give away.
Mixed on telephone book pages?? I haven't seen an old telephone book here in the Philippines for ages!!! Great video again.
What was your burnout process time ?
This looks awesome^^
Sadly... My coins will be made with...
1gram of .999 silver shot.
Far to small for casting method.
But your method is perfect if I ever make larger coins. Is also perfect for
making medallions to adorn my official uniform once I get it.
Good job.
Make a shurinkein
How'd you do that with the wax??
Que chido
The shiny is eye-catching but i like the rustic look myself . 💪▶️✌
Awesome work and video easy to follow. Do you take orders for your molding and creations?
Visit my website to see what’s available
I prefer polished coins
Where did you get the molds?
Супер.
Where did you get the coin mound?
I make them and sell them on my website
These kind of2 side mold for sale?
Where do I find 2 sided molds?
Can you make coin mold?
I was just thinking about how one could make copies of replica coins out of real material. I recently purchased a few copies of obsolete coins that I had been playing around with the idea of casting them out of real brass/silver or possibly even gold over the copper that these are made out of.
слитки просто супер
where you buy the vibrator tumble?
do you do giveaways man
BOTH
Man at this point you should just go ahead and get two French bulldogs.
Nice melt ! If you have a minute you should watch my video melting down a bike frame!
have you ever thought of opening a online shop so people could buy the coins you make or the rings?
Luna Dragonheart I have an online shop. It’s in the description 😉
Would you be interested in making coins for my team? We shoot 100s of 1000s of .50cal and 7.62 rounds and I’ve always wanted to do something with all that brass I stead of “recycling”. Let me know, thanks.
Contact me via email and we’ll talk 👍🏻
🔥🔥.Personalmente me gusta mas pulido espejo.🔥🔥
👏👏👏👏👏👏👏👏👏👏
*A drop of Dawn and grease is gone*
Hola! El 18 de septiembre es el cumpleaños de mi esposo. Podrás hacer esa semana la nave de Star Trek Enterprise?