EW0082 - Sony SL-F1E Beta VCR Investigation - Repair Attempt
HTML-код
- Опубликовано: 11 сен 2024
- We take a look inside a Sony SL-F1E Beta Portable VCR, explore the internals and attempt to find out why it is not working.
Most of this was recorded from a Live Stream.
If you want to see more electronics and related things, follow me on Twitter: / electricelecami
If you like the videos please consider supporting the channel: ko-fi.com/elecami
Lucario talking about Betamax
That took me off guard XD
Nice video btw
Thanks. Lucario likes old VCRs :-)
@@Elecami XD
Lucario knows what’s good 😎
looks like the inside of a older computer , but have fun with it!
Yes, they have got quite a lot of stuff packed in to a small space.
基板型ポリプロピレンコーディングIC (オレンジ色)がいっぱいありました。IC の中にはそのままのトランジスタがありました。故障したビデオヘッドドラムモータードライブブロック型IC内の トランジスタの部分にオレンジ色のポリプロピレンコーディング？を削って露出させて不良トランジスタを外して新しいものを交換したことがあります 。IC 内部基板はセラミックで出来ており、2度のはんだつけは困難でした。で、このようなVTR はよみがえることが出来ました。大変難しいかったです。❤
Well done to find a fault inside those orange modules!
Just curious, what camera setup do you use? I recently purchased a Sony NEX-EA50M professional camcorder from 2015. It does 1080p at 60fps and has professional features like XLR inputs but no 4K, but I don't plan on using 4K for a long time. I'm trying to make an overhead camera mount for it. Did you DIY your own or did you buy one?
The camera above the bench is a Samsung NX500. I put it in 'pre-record' mode by pressing the Trash button. That gets it to output a nice clear 1080p video signal from the HDMI. I capture that and record it with OBS along with the microphone that is connected to a USB audio interface.
The NX500 is one of the best compact mirrorless cameras ever made. Very good performance and usability for a reasonable price and excellent selection of compact lens.
I got a Smallrig cage for a Sony camera, it is close enough to fit the NX500. It is attached to a shelf above the bench with some clamp and arm things.
@@Elecami I'm going to probably buy a Sony a6400 as my overhead camera and primary photo camera. The EA50 uses the same lens mount, and since the EA50 I got came with a nice servo zoom 18-200mm lens I can easily put that on my a6400 or buy a I can easily put that on my a6400 or buy the kit 16-50mm lens. The EA50 does have HDMI output so I could hook it up to a capture card and get higher bit rates than the AVCHD recorder. I have an Elgato HD60 but I don't think the bitrate is much better than AVCHD. I'm pretty sure a Blackmagic Intensity Pro 4K would work a lot better since it can capture HDMI 1080p at 60fps. I have the standard Intensity Pro but it can only record 1080p at 30fps.
it like Just one big PCB Board chopped and rewired 90 ...and a 90, and another 90 and then wrap it up Beta-VCR....
Yes I think they would make all the PCBs on one large panel with all components placed and soldered on one pass.