How To Program A Ford Edge Smart Key Remote Fob 2011 - 2015
HTML-код
- Опубликовано: 27 авг 2024
- An easy to follow video on how to program a smart key remote fob to a 2011 - 2015 Ford Edge.
Find a Locksmith in your area with www.LocateALoc...
More free programming instructions available at www.ProgramYou...
Ensure that your Edge is off before beginning this procedure. Ensure that all doors are closed before beginning this procedure and that all doors remain closed throughout the procedure. Perform this procedure exactly as described below, and perform all steps within 30 seconds of starting the sequence. If any steps are performed out of sequence, stop and wait for at least one minute before starting again. Please read and understand the entire procedure before you begin.
1. Place the new unprogrammed smart key in the pocket inside of the center console.
2. Press the driver or passenger power door unlock control three times.
3. Press and release the brake pedal one time.
4. Press the driver or passenger power door lock control three times.
5. Press and release the brake pedal one time. The indicator on the Start/Stop button should begin to rapidly flash, indicating that programming mode has been entered and two programmed smart keys have been detected in the vehicle.
6. Within one minute, press the start/stop button. *If four Intelligent Access Keys have already been programmed to your vehicle, the message MAX # OF FOBS LEARNED will be displayed on the message center. *
7. Remove the smart key from the center console pocket and press the UNLOCK or Lock control on the newly programmed smart key to exit programming mode.
8. Verify that the remote entry functions operate (lock, unlock) and that the vehicle starts with new smart key. If the smart key has been successfully programmed, it can be used to activate the smart key with push button Start feature and can be used to start your vehicle.
Fantastic! Took me til the second time, but maybe I should've hit the unlock and lock buttons slower. Fab 30 bucks on amazon, and programming free! Can't beat that.
God bless you guys
Glad it helped!
Worked like a champ on a 2013 ford edge. Ford wanted 199 per fob and 299 install/programming. I paid 59 and did it myself! Thanks!
Nice! You're Welcome!
And how many keys did you have prior to programming on your own?
Nice job. Perfect instruction for our 2015 Expedition. Dealer wanted $200 for key fob PLUS $200 more to program it. Criminals. Amazon $30 fob plus these instructions and I’m all set. Thanks!
$200 to program it?? That’s insane
Worked like a charm. I bought a used Flex and one of the fobs was worn out. I took it apart and fooled around with it, swapped out pieces with the working fob, and got it to partly work, along with the one functioning fob I already had. I followed these instructions and it worked perfectly. The only difference was the spot in the console to charge the new fob was different from this example, but that was outlined in the owner's manual, under "Security." I'll program a third one now, so that I'll always have two good ones. Thanks!
You're Welcome! Glad it helped!
I ordered 2 fobs from Amazon and used this and now have 4 master keys on 2012 Ford. Thank You!
You're Welcome!
Awesome! Thank you! Dealer wanted $500 to program a new key for my 2014 Ford Edge! Thank you! Thank you! THANK YOU!
You're Welcome! Glad it helped
Awesome! Thanks for sharing this. I ordered the fob off eBay for 30 bucks and followed the video and I'm set. Thanks
You’re Welcome! I’m happy it helped!
Thanks, man,. You're a genius. The light around my starter switch didn't come on, but it may be broken. So I just assumed it was in programming mode and everything worked. I have a 2011 Ford Edge.
Glad it helped!
Can’t thank you enough. Worked like a charm. You saved me $400.
Glad it helped!
Whos watching this with only one key? :(
I :'((
AMAZING ! EXCELLENT VIDEO !
Thanks!
I need a video on how to program my Smart Key on my Ford Cmax Energi
Thank you!
You're welcome!
Love your channel !! Thank you!!
Thanks for watching!
Program Your Remote check my stuff out too!!
WIll do!
Am also Locksmith working in Saudi Arabia
Cool, thanks for watching!
ali i need you help i am in riyadh and i have only one key the previous owner lost the other one
Which car you have
Awesome video. 👌
Thank you 👍
I got a second key using one key with a $70 universal EZ programmer for my 2017 edge. Figure it is about how much a locksmith would charge. now i just need to get the new fobs emergency key cut somewhere and figure out how to wipe the 3rd key I don't have from my car. Where ever the used car lot got my car they didn't get the second fob with it.
Is there a way to deprogram one of these remotes when you dont have it??
Unfortunately there is no way to do that with these particular smart keys
Thank you thank you! You’ve just saved me $200..!
You're Welcome!
The ignition is not blinking for me
I only have one key fob. I ordered one replacement. I know you said you needed 2 for it to work. Are you sure?
Yes, I’m positive that you need 2 or you will not be able to do it yourself.
@@PYR-Auto thanks 😥
I'm in the same boat
Can you reprogram two new smart keys if the two old ones you had a not working at all
No - they need to be able to at least be read by the vehicle
but why do you have to have two keys in the car when wantin to program a new key?
you would have to ask the engineers at Ford
I do the unlock/lock and brake sequence, but my car won't enter programming mode. Any idea why? 2013 Ford Explorer Sport
It may take a few tries, some vehicles are more sensitive than others to the speed in which you are doing all the steps. Make sure to open and close the drivers door a few times in between attempts before trying again to "reset" before trying again.
Is this when I just buy the cover for the fob or a whole new fob?
whole new fob
Do you need both working fobs in the vehicle to do it? I have 2 programmed for my Edge but have lost one. Will it still work if 2 are programmed but only 1 in the vehicle?
Yes - you need two working in your possession
How important is putting the new one in the slot in the console? I have a 2013 Ford Escape that uses the EXACT same key, but there is no slot so it won't work. Where you show the slot, mine has video and audio inputs.
Unfortunately, your 2013 Ford Escape is not onboard programmable, there is no manual way to program a smart key for it.
I know this is the correct procedure for programing a new key fob but did not work for me
on my 2011 ford edge... Will the start/stop light flash if there isn't a new unprogrammed key
in the console pocket ?Trying to figure out if the problem is with the new key fob or my Ford Edge.
I know the 2 already programmed fobs need to be in the vehicle in order to get it into programming mode (stop/start flashing) but I am not sure if the vehicle will go into programming mode without a new fob in the console pocket, I've never tried it.
OK I figured it out, the reason it didn't work for me was a intermittent door switch witch is OK now..I programed my
3rd key with these instructions (2011 Ford Edge) also I removed the key fob from the console pocket and went through
the same procedure and the start/stop light blinked just as it did with the spare fob in the pocket..
hi buddy i have a 2012 ford edge limited with only one control i see 2 controls are needed. How is it done with just one?
Automotive locksmith or dealership
@@PYR-Auto No, I did it with Forscan and it saved me a lot of money. thank you
Sorry, I know there are lots of comments and I see that you've tried to respond to a great many of them. I looked in the comments, trying to see if anyone had a similar issue so you would not have to repeat yourself, and I didn't see anything, though I may have missed it. I'm sorry if so. My Ford Edge has only one key, came that way from dealership. There ARE two programmed, but we only got one, as they only had the one when we got the used car. Is this possible? Or must we have 2 physical keys in our hands?
Unfortunately not - you need the two keys in your possession
Hi I have a 2010 Lincoln MKT with a Ford installed remote start module. I have push button start and tried to get into programming mode in order to have the vehicle running when doors are opened. I hold the push button untill it goes into run mode and than hold the programming button and the brake pedal, but I never hear any horn sounds. Do you know if their is a different method to get into programming in the 2010 Lincoln MKT?
Thanks
A 2010 MKT should use the exact same programming procedure as this video.
Is a ray gun gonna pop out the center console?
unfortunately not
Will it work for a Ford Edge 2012 ?
Yes, it will
Nice video. Much appreciated.
My comment would be great but who needs 3 keys??? My 2011 Edge sport had two until we believe my daughter tossed one set in the garbage as she was into this (tossing random items into the garbage) as a toddler. So I've had only one set for about 8+ years.
this procedure does not work for my 2011 ford edge. I ordered the new key FOB on ebay. and followed you instructions to a t! Any suggestions? thanks for your assistance.
Are you able to get the vehicle into programming mode?
@@PYR-Auto mine won't work either, please help
Getting a msg on screen "Max # remotes reached". Bought used car with 2 remotes.Wanting to program remote from previous owned '08 Edge...possible?
unfortunately you will need a dealership or someone with the correct equipment to clear the existing remotes before you will be able to program any more additional ones.
I have two smart keys but unfortunately one of them lost so can I program a new key ???
Unfortunately there is no onboard procedure without 2 working fobs
Hi, Thank you for this great video. I have a question. Do you know how "deprogram" key fob from 2014 Ford Edge memory. One of my key don't work correctly and I want to remove it from memory to be able to program another one. There is only memory space for 4 keys.
Thank you.
Unfortunately there is no manual way to erase a key - it will need to be done by an automotive locksmith or dealership
@@PYR-Auto Thank you
how about programming a 2-way key fob for push to start 2013 ford explorer? thanks
All of our programming information can be found at www.ProgramYourRemote.com
does the 2016 ford edge sport key works on a 2013 ford edge sport? { keyless smart key }
No - they use a different smart key
Can I change or convert my key to a push to start?
No
it works in my c-max hybrid 2016? please help!
This procedure will not work on a 2016 C-Max. the programming information for a 2016 C-max can be found here www.programyourremote.com/classified/2016-ford-c-max-keyless-entry-remote-fob-smart-key-programming-instructions-listing-8313.aspx
Pls help i for ford escape 2013 i have problem with car keyless is working but the car is starting i how can I do
If your remotes are all working but none of
them start the car, it sounds like you may have a deeper issue than the remotes themselves. I would recommend getting in touch with a mechanic or Dealership.
Generally how much will it run you to have to go through a lock Smith? My escape only came with one fob...
It really varies but I would estimate around $50, if you bring your own fob and drive to them. If you don't know of a Locksmith in your area, try here www.locatealocksmith.com/directory/
Can you use a smart programmer with no keys
Yes
Do you know if it works with ford explorer 2012?
It will if your Explorer has push button start. If your Explorer uses a remote-head key instead of a smart key, use this procedure www.programyourremote.com/classified/2012-ford-explorer-keyless-entry-remote-fob-smart-key-programming-instructions-listing-7596.aspx
ህይወት የቀጠፉ
የሰው ልጅን እንደ ቅጠል የቀጠፉ የወያኔ ተዋጊዎች በቀላሉ ምህረት ተደርጎላቸውመለቀቅ አይኖርባቸውም።በተለይም ከቤተሰቦቻቸው ፊት የደፈሩና የገደሉ ለፍርድ መቅረብ አለባቸው። ቤተሰብ መጉዋጉዋዣ ተመድቦለት በየካምፑ ያጋልጥ።
Do you know where to put the key in a 2018 Ford Flex?
Actually, there is. I have a 2018 Flex limited. I was able to program a key using these instructions, for the type of key shown. The only thing that was different is that the pocket the new fob must be inserted into is on the drivers side of the center console, towards the back. He fob must be inserted with the key ring end back, and the buttons facing the passengers side.
Will it work for a Ford Focus Titanium 2014?
It will not. Unfortunately, there is no manual way to program a smart key to a 2014 Ford Focus.
@@PYR-Auto Thank you
Will this work on a 2014 ford escape?
There is no manual procedure for a 2014 Escape with push button start
@@PYR-Auto Really? Well that stinks
will this work for a 2013 Ford Taurus?
Yes, the pocket in the center console may look a bit different but the procedure is the same.
Program Your Remote thank you
@@allenrahrooh7140 You're Welcome!
I have both OEM remotes
One doesn’t operate anything (battery tested)
Do both have to be functioning to get a third programmed?
2012 edge sport
Yes - both will need to be functioning in order to get the vehicle into programming mode
How much are the programmer
There are many different ones out there. They can generally range from a few hundred to a few thousand, depending on how good of one you want.
This is not for a cord edge
Thank you!
You're welcome!
ህይወት የቀጠፉ
የሰው ልጅን እንደ ቅጠል የቀጠፉ የወያኔ ተዋጊዎች በቀላሉ ምህረት ተደርጎላቸውመለቀቅ አይኖርባቸውም።በተለይም ከቤተሰቦቻቸው ፊት የደፈሩና የገደሉ ለፍርድ መቅረብ አለባቸው። ቤተሰብ መጉዋጉዋዣ ተመድቦለት በየካምፑ ያጋልጥ።
do you know if it works with Ford explorer 2013 ?
Yes, if the explorer is push button start.
Program Your Remote thank you very much man !!
You're welcome!